SIS@ Radiosonde HES SRE Studiousness HD is a trademark of SRS Labs, Inc. Studio Sound HD technology is incorporated under license from SRS Labs, Ine. This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase purer consumption that could exceed the lifts necessary to qualify for ENERGY STAR rating.
Thank You for Choosing VIZIER My Product Information And congratulations on your new VIZIER HDTV. To get the most out of your new VIZIER product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts. Product Registration To purchase or inquire about accessories and installation services for your VIZIER product, visit our website at www. VIZIER .com or call toll free at 1-888-849-4623.
Important Safety instructions Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.
VELEZ / E420VE Do nat overload power strips and extension cords. Overloading can result in fire or electric shock, The wall socket should be installed near your TV and easily accessible. Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage may cause fire or electric shock. Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
Television Antenna Connection Protection if an outside intelligentsia dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Table of Contents Installing the TV. 1 Inspecting the Package Contents . IN SLANG the TV. iris eis assess 1 In staling the TV Base Installing the TV on a Wall. Controls and Commissions Owen: 3 Rear Pane! Inputs... Rear Pane! Buttons Front Panel Remote Control Replacing the o.com Oreo more 6 Connecting Your Device S ooh 7 Before You BEGIN ...c.corrimminommcomnecroeoi gross assoc race 7 CONNECTION YOU DEVICES wir asseveration nna oneness ss senses sans sos oneness 7 Completing the First-Time Setup...
7 EF70VP / EAVE Adjusting the Photo Viewer 28 Troubleshooting & Technical SUDPOrL..or orn 30 The TV displays “No Signal.” The power is on, but there is no image on the SEC. ovens 30 There Is no Sound. nnn The colors on the TV don't pol right. The bunions on the remote rent working The Image quality is NOt eee eee references 30 The picture is distorted . The display image does not cover the entire scree The TV has pixels (dots) that are always dark or always it... 31 | see “noise” or static on the screen...
installing the TV Inspecting the Package Contents Before installing your new TV, take a moment to inspect the package contents. Use the images helot to ensure nothing is missing or damaged.
3. Using a Phillips-head screwdriver, attach the base to the TV by inserting and tightening the included screws. 4. Attach the plastic cover. 5. Move the TV with attached stand into an upright position and place on a flat, level, and stable surface. To ensure proper ventilation, leave at feast 1” of space between the back of the TV and any other objects (walls, veto.
Controls and Connections Rear Panel Inputs S.hmm EJ70VP Bb Audio Out E420VP b : HCA © Audi Out Optical Audio HGB PC Component! Out Composite AY Cable/ Antenna Rear Panel Inputs PC Audio In: RGB PC: Component: Composite AV: Interchangeable: Optical Audio Out: RCA Audio Out: 3.5mm Audio Qut: HDMI use: AC iN: Connect 3.5mm connector from computer. Connect RGB cable from computer. Connect component video/audio device, (Shared with Component) Connect composite video/ audio device.
rg] EF70VP / EAVE Rear Panel Buttons Front Panel Power Menu Channel Up Channel Down Volume Up Remote Control Sensor Volume Own input Front Panel Remote Control Sensor: When using the remote, point it directly at this Sens Or. Rear Panel Buttons Power: Turn the TV on or off. Menu: Display on-screen menu. Channel Up/Down: Change the channel. Volume Up/Down Increase or decrease the loudness of the TVs audio. Input: Change the input device.
VELEZ / E420VE ig Remote Control Power/Standby: Turn the TV on or off, Input: Change the input device. A/V Controls: Control external device (CC-gnabled devices only). Info: Display the info Window. CG: Open the Closed Captioning menu. Menu: Display the on-screen menu. Input Power/Standby Exit: Close the on-screen menu. AV Controls Arrow: Navigate the on-screen menu and episode guide. oe info OK: Select highlighted menu option. Exit Menu Guide: Display the episode guide (digital channels only).
ES ES70VP / EA20VP Replacing the Batteries 1. Remove the battery cover. 2. Insert two AAA batteries into the remote control, Make sure that the and () symbols on the batteries match the and symbols inside the battery compartment. 3. Replace the battery cover. = Use only good quality batteries. « Inserting the batteries incorrectly may result in cracking or leakage that may cause a fire or result in injury. + Dispose of oid or dead battered in accordance with local hazardous waste regulations.
Connecting Your Devices Your HDTV can be easily connected to an external device: + DVD or Blu-Ray player = Video game console » Gable box + External antenna + Or other device Before You Begin To connect a advice to the HDTV: 1. Verify that the device has one of the following types of video ports available: HOME RGB Pe® 0® Component Quarterfinal Oe 06 Composite AY Required Device Ports 2. Ensure the TV has a matching port available. 3. Ensure you have a cable that matches the available port.
= ES70VP / EA20VP Select one of the connection types. Lie the cables) shown to connect the TV to your device.
Completing the First The first time you turn on the TV, the Setup App will guide you through each of the 4. Use the Up/Down Arrow buttons on steps necessary to get your TV ready for use. the remote to highlight your time zone and press OK. Before you begin the first-time setup: = Your TV should be installed and the power cord should be connected to an electrical outset. See Instating the TV on page 1. « Your devices should be connected, Ses Connecting Your Devices on page 7.
Using the On-Screen Menu Your TV features an easy-to-use On-Screen menu. To open the on-screen menu, press the MENU button on the remote. From this menu, you can: s Change the input source + Change the screen aspect radio = Set up closed captioning «Activate the sleep timer at Wide «Adjust the picture settings : * Adjust the audio settings + Change TV settings [I » Access the help menu Eis ns Picture fo USE Media Navigating the On-Screen Menu To open the on-screen menu, press the MENU button on the remote.
VELEZ / E420VE Use the table below to determine the best aspect ratio for your content type. Areas in red will not be visible on your TV screen. Setting the Screen Aspect Ratio The TV can display images in five different modes: Normal, Wide, Zoom, Panoramic, and Stretch. Each mode displays content according to the content’s original format.
Changing the Screen Aspect Ratio The TV can display images in four different modes: Normal, Wide, Zoom, and Panoramic. Each mode displays the picture differently. To change the screen aspect ratio; 1. Press the MENU button on the remote. 2. Use the Arrow buttons to highlight the E Wide icon. Press OK. a 4 Zoom Panoramic, 3. Use the Arrow buttons to highlight your desired screen mode and press OK: «Normal preserves the contents original aspect ratio.
VELEZ / E420VE When activated, the TV's sleep timer will turn the TV off after a set period of time. Changing the Appearance of Digital Closed Captions Activating the Sleep Timer Digital closed captions can be displayed according to your preference. To change the appearance of digital closed captions: . To use the sleep timer 1. From the Closed Caption menu, use the Arrow buttons to highlight Digital 1. Press the MENU button on the remote. CC Style. Niter The on-screen menu is displayed. 2.
Adjusting the Picture Settings Your TV display can be adjusted to suit your preferences and viewing conditions. To adjust the picture settings: 1. 14 Press the MENU button on the remote. The on-screen menu is displayed. Use the Up/Down Arrow buttons on the remote to highlight Picture and | Mitts Mode (ese press OK. The Picture Settings menu displayed.
VELEZ / E420VE Adjusting the Advanced Picture Settings To adjust the advanced picture settings: 1. From the Picture Settings menu, use the Arrow buttons on the remote to highlight More, then press OK. Hals Reduction lal] ra Use the Arrow buttons on the remote to highlight Advanced Picture, then press OK. The Advanced Picture menu is displayed. 3.
ry EF70VP / EAVE Adjusting the Picture Size and Position Adjusting the Audio Settings When displaying an image from the HDMI! or RGB input, the size and position of the display image can be adjusted. To adjust the audio settings: To adjust the picture size and position: 1. Press the MENU button on the remote. . . The on-screen menu is displayed. 2 1. Ensure the input is set to HDMI or RGB. Use the Arrow buttons on the remote Balance 2.
VELEZ / E420VE = Adjusting the Advanced Audio Settings Resetting the Audio Settings To adjust the advanced audio settings: To reset the audio settings to the factory default settings: 1. From the Audio Settings Menu, use the Arrow buttons to highlight Advanced Audio, then press OK. The Advanced Audio menu is displayed, 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK. The Audio Settings menu is displayed. ea 2.
Changing the TV Settings Using the TV settings menu, you can: Setup the TV tuner + Name the TV inputs » Setup parental controls + Change the on-screen menu language + Set the time s Adjust the CEC settings Setting the Tuner Mode if you are using a device that is connected to the RF input, such as an external antenna or cable TV connection, you must set the tuner mode. A This setting is only available when viewing the TV input. 1. Press the MENU button on the remote. The on-screen menu is displayed. 2.
VELEZ / E420VE Adding New Channels Occasionally, you may need to add a new analog channel or add a new range of channels, You can do this by using the Partial Channel Search and Add Analog Channel options. A This setting is only available when viewing the TV input. | To add a range of new channels: 1. From the Settings menu, highlight Partial Channel Search. The Partial Channel Search menu is displayed. 2. Highlight Scan Mode and select the type of channel you are adding: Analog, Digital, or Analog/Digital.
Changing the Audio Language Same digital free-to-air and cable channels broadcast programs in more than one language. The TVs MTS (Multichannel Television Sound) feature allows you to listen to audio in your preferred language. feature only works when the program being viewed is being | A Not all programs are broadcast in multiple languages. The MTS broadcast in the language you select. To use the Analog MTS feature: 1. From the Settings menu, highlight 7 RE Analog MTS and press OK.
EQ7OVP / E420VP Enabling or Disabling Program Ratings To carnage program content according to its rating, vou must enable the Program Rating feature. To enable or disable the Program Rating feature: 1. From the Parental Controls menu, highlight Rating Enable and press OK. The Rating Enable menu is displayed. 2. Select On or Off and press OK. Locking and Unlocking Channels ‘When a channel is locked, it will be inaccessible.
Changing the Parental Control Pass code if you use the parental controls, you should change the pass code to prevent children from accessing inappropriate material. 1. ra 5. From the Parental Controls menu, highlight Change PIN and press OK. The Change PIN menu is displayed. In the New Pin field, use the Number Pad on the remote to enter your new 4-digit parental control pass code. In the Confirm Pin field, use the Number Pad on the remote to re-enter your new 4-digit parental control pass code.
VELEZ / E420VE Changing the On-Screen Menu Language Your TV can display the on-screen menu in different languages. To change the on-screen menu language: 1. Press the MENU button on the remote. on Co The on-screen menu is displayed. i Largish 2. Use the Arrow buttons on the remote [EA to highlight the Settings icon and press OK. The Settings menu is displayed. Ere 3. Use the Arrow buttons on the remote to highlight Menu Language and press OK. The Menu Language menu is displayed. 4.
ry EF70VP / EAVE Adjusting the CEC Settings Using the Help Menu The CEC function on your TV enables you to control HDMI-connected devices with the included remote without any additional programming. You can use the TV's Help menu tor « Display system information i Not ail HDMI devices support CEC. See your device's user manual . : 4 Hal i Reset the TV settings | A for details. 9 Saturn Info ¢ Restore the TV to its factory default settings e Get guided setup help for the tuner : 1.
VELEZ / E420VE = Restoring the TV to Factory Default Settings Using Guided Setup All of the on-screen menu settings can be reset to the factory defaults. The TV's Setup App can be used to easily set up the TV tuner or to connect the TV with your network, g A if you restore the TV to the factory default settings, all changes you have made to the settings will be lost To access guided setup: To restore the TV to its factory default settings: 1. 2. 1. Press the MENU button on the nonvoter.
ES70VP / EA20VP Using the Digital Episode Guide Using the Info Window The Info Window can be displayed by pressing the INFO bunion on the remote: Your TV features an on-screen digital episode guide. This guide displays program «Press the INFO button one time to display channel and input information broadcast by over-the-air digital television stations as well as the information. current time and date.
Using the USE Photo Viewer The USB Media Player allows you to connect a USB thumb drive to your TV and view photos. USB Media Player Connecting a USB Thumb Drive to the TV 1, Turn the TV off. Connect your USB thumb drive to the USB port on the side of the TV. 2. Press the Power/Standby button on the remote or touch the Power control on the side of the TV to tum it on. Do not remove the USE thumb drive while the TV is on. Doing so may damage the drive.
Adjusting the Photo Viewer Settings The photo viewer can be adjusted according to your preferences. To adjust the photo viewer settings: 1. While the photo viewer is on screen, press the MENU bunion. The settings men is displayed. 2. Highlight the menu setting you wish to adjust and press OK. ® Slideshow Mode Determines the order in which your photos are displayed during the slideshow. Select Single, Shuffle, or Sequence. Repeat When Repeat is set to On, the slideshow will play continuously.
: Troubleshooting & Technical Support Products are often returned due to a technical problem rather than due to a defect. If you are experiencing a probable when using your TV, try to fix the issue using this troubleshooting guide. if, after using this troubleshooting guide, you are still experiencing an issue with your TY, contact Vizier's Support Department. Quality customer support and service are integral parts of Vizier's commitment 10 service excellence. Web: wwwVIZIO.
VELEZ / E420VE The picture is distorted. + Nearby electrical devices may be interfering with the TV. Separate the TV from electrical appliances, cars, or putrescent lights. s Ensure all cables are securely attached. The display image does not cover the entire screen. + If you are in RGB mode (computer), ensure that H-Size and V-Position in the on-screen menu are set correctly. = if you are using TV, AV1, AVZ, or Component with 4801 input, press the WIDE button on the remote to change the screen mode.
32 Serene Size: Diagonal Viewable: Dissensions w/ Stand: wig Stand: Weight w/ Stand: w/o Stand: TN Type Refresh Rate: Maxim Resolution Pixel Pitch: Dynamic Contrast Cabin: Response Time: Rightness: HOMO Inputs: Component Inputs: Composite Inputs: RE/Coaxial Input: USB Ports: RGE Inputs: OSD Language: Audio Dutiful: Number of Speakers Watts Channel Specifications E370VP 37 Class 37.007 Shiva epg Bay Ban Shr ash gn E420VP 4p Claus 42.02" Dana x aT OD wain SHG wad Be el an 21.40 bs 26.24 ibs 20.10 ibs 24.
Limited Warranty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only. VIZIER provides a warranty to the original purchaser of anew Product against defects in materials and workmanship for a period of one (1) year of non-commercial usage and ninety (80) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIER will either repair or replace the Product at its sole option and discretion.
Legal & Compliance FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TRADEMARKS SHOWN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS: IMAGES USED ARE FOR ILLUS RATION PURPOSES ONLY. VIZIER; THE LOGO, WHERE VISION MEETS VALUE, AND OTHER VIZIER TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF VIZIER INC.
