VIZIO USER MANUAL Model: E600i-B3 & E700i-B3
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
Welcome THANK YOU FOR CHOOSING VIZIO IMPORTANT SAFETY INSTRUCTIONS And congratulations on your new VIZIO HDTV. Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel.
your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock. • This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your TV yourself.
TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Table of Contents Installing the TV................................................. 3 Viewing Video with the Menu Open................................... 22 Inspecting the Package Contents...................................... 3 Adjusting the Picture Settings............................................. 23 Installing the TV.................................................................... 3 Adjusting the Advanced Picture Settings......................... 24 Installing the TV Stand..................
Changing the Appearance of Digital Closed Captions.. 40 Using the Fullscreen V.I.A. Plus Apps Window...................... 55 Renaming Devices on the Input Menu............................... 42 Fullscreen V.I.A. Plus Apps Window Overview...................... 56 Changing the TV Settings.................................................... 43 Customizing the V.I.A. Plus Apps Window............................ 57 Viewing System Information.............................................
1 Installing the TV INSPECTING THE PACKAGE CONTENTS INSTALLING THE TV Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged. After removing the TV from the box and inspecting the package contents you can begin installing the TV.
1 To install the base: It is recommended that two people take part in the base installation. 1. Insert the three (3) included M5 16mm Phillips screws and tighten them using a Phillips screwdriver to secure the base to the TV. Remove any plastic wrapping from the TV and the stand. 2. When you are finished, place the TV on a stable, level surface. Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface such as a blanket.
1 Installing the TV on a Wall To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. Screw Size: E600i-B3 E700i-B3 M6 M6 Hole Pattern: 400mm (V) x 400mm (H) Weight w/o Stand: 46.30 lbs 400mm (V) x 400mm (H) 57.54 lbs Be sure the mount you choose is capable of supporting the weight of the TV.
2 Controls and Connections USB - Connect USB thumb drive to play photo, music, or video. HDMI - Connect HDMI device. Optical Audio Out - Connect optical/SPDIF audio device, such as home audio receiver. Stereo Audio Out - Connect RCA audio device, such as sound bar. Coaxial - Connect coaxial cable from cable, satellite, or antenna. Component/Composite - Connect component or composite device. Ethernet - Connect Ethernet cable from home network. HDMI - Connect HDMI device.
2 Controls and Connections Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model. Power/Input - Press once to turn on the TV. Press once to access the Input menu. Press and hold to turn off the TV.
2 FRONT PANEL REMOTE SENSOR & POWER INDICATOR When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off on page 47.
2 REMOTE CONTROL APP LAUNCHER Quickly launch the pictured app. INPUT Change the currently-displayed input. POWER Turn TV on or off. A/V CONTROLS Control USB media player. INFO Display the info window. CLOSED CAPTIONS Turn closed captions on and off. MENU Display the on-screen menu. EXIT Close the on-screen menu. ARROW Navigate the on-screen menu. OK Select the highlighted menu option. GUIDE Display the info window. BACK Go to the previous on-screen menu.
2 Replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover.
3 Connecting Your Devices CONNECTING A DEVICE Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc.). Cable/Satellite Box 2. Turn the TV and your device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. Set the TV’s input to match the connection you used (HDMI-1, HDMI-2, etc.).
3 CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES AV CABLE COAXIAL CABLE AV cables (or Composite cables) are the traditional way of connecting your devices to your TV. Video signals are sent over the yellow connector while audio is sent over the red and white connectors. Coaxial cables are the traditional way of connecting antennas and cable television signals to your TV. Coaxial cables carry both audio and video signals through a single connector.
3 COMPONENT CABLE HDMI CABLE Component cables are designed to carry high definition video signals along with additional audio connections. Colors are delivered with color information split up three different ways over three connectors for video (separated into Red, Blue and Green signals) and the left and right audio connectors (Red and White). HDMI is the intelligent, all-digital interface that delivers both dazzling quality and unmatched ease of use.
3 CONNECTING AN AUDIO DEVICE Your TV can output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has an audio port that matches an available port on the TV (Optical, RCA, etc.). Home Audio Receiver 2. Turn the TV and your audio device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. VIZIO Sound Bar HDMI CABLE BEST • CEC 2-WAY COMMUNICATION • 2.0-5.
3 CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES RCA CABLE OPTICAL/SPDIF CABLE HDMI CABLE AV cables (or Composite cables) are the traditional way of connecting your devices to your audio device. Audio signals are sent over the red and white connectors. Optical/SPDIF cables transmit audio signals as pulses of light through a cable made of plastic fibers. Audio signals are digitally transmitted between devices.
3 CONNECTING AN AUDIO DEVICE - ARC Without HDMI ARC With HDMI ARC Built-in Tuner Built-in Tuner VIZIO Internet Apps VIZIO Internet Apps Your TV Without an HDMI ARC setup, your TV will transmit audio signals from the built-in tuner and VIA apps to your home audio receiver through a separate audio connection.
3 CONNECTING TO YOUR NETWORK Your TV is internet-ready. It can be connected to your home network with a Wired or Wireless connection. Connecting to a Wired Network (Best) Connecting to a Wireless Network 1. Ensure you have a router or modem broadcasting as high-speed wireless signal (802.11n recommended). 2. Use the Guided Network Setup to configure the TV. See Connecting to a Wireless Network on page 34. 1. Connect an Ethernet cable to your router and to the Ethernet port on the back of the TV.
Completing the First-Time Setup The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV ready for use. Before you begin the first-time setup: • Your TV should be installed and the power cord should be connected to an electrical outlet. • Your devices should be connected. • If you have a wireless network, have the wireless password ready. • If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the TV.
Completing the First-Time Setup 8. Use the Arrow buttons on the remote to highlight your TV source and press OK. If you have cable TV, select whether you have a cable box or if you connect the TV directly to a cable from the wall. 9. If the TV Signal channel scan screen appears, the TV will need to scan for channels, which takes several minutes. Use the arrow buttons on the remote to highlight Begin Scan and press OK.
5 Using the On-Screen Menu NAVIGATING THE ON-SCREEN MENU Your TV features an easy-to-use on-screen menu. To open the on-screen menu, press the MENU button on the remote. You can also open the on-screen menu by pressing the VIA button and selecting HDTV Settings from the VIA Dock, then pressing OK.
5 CHANGING THE INPUT SOURCE CHANGING THE SCREEN ASPECT RATIO External devices such as DVD players, Blu-ray Players, and video game consoles can be connected to your TV. To use one of these devices with your TV, you must first change the input source using the Input menu. The TV can display images in five different modes: Normal, Stretch, Panoramic, Wide, and Zoom. Each mode displays the picture differently. To change the screen aspect ratio: To change the input source: 1.
5 VIZIO Wide Zoom VIEWING VIDEO WITH THE MENU OPEN Normal Panoramic When the on-screen menu opens, it covers the left-hand portion 2D 3D of the picture. The picture can be displayed in Exit three different ways: Contrast Color Tint Sharpness • Full-sized and aligned to the right edge of the menu The picture extends off of the right side of the screen. Sleep Picture 2. Press OK to cycle through the three display methods. 3. Press the Up Arrow button on the remote to the menu.
5 ADJUSTING THE PICTURE SETTINGS produce a brighter, more vivid picture. Your TV display can be adjusted to suit your preferences and viewing conditions. Changes made while a preset picture mode is selected are automatically saved as a new custom picture mode (see Custom Picture Modes on pages 28 through 30). Automatically-created custom picture modes are given generic names, beginning with "Custom 1.
5 • Reduce Signal Noise - Diminishes artifacts in the image caused by the digitizing of image motion content. Select Off, Low, Medium, or High. Adjusting the Advanced Picture Settings To adjust the advanced picture settings: 1. From the PICTURE menu, use the Arrow buttons to highlight Advanced Picture, and then press OK. The ADVANCED PICTURE menu is displayed. 2.
5 Adjusting the Professional Picture Settings Professional Picture Settings allow you to make precise adjustments to the picture and to create picture modes to save groups of picture settings. Adjusting the Color Tuner Settings The Color Tuner settings allow you to adjust the HSB color and 11 point white balance, turn color channels off for testing, and display color bar, flat, and ramp test patterns.
5 To turn color channels off and on: To adjust the 11 Point White Balance settings: 1. From the PROFESSIONAL PICTURE menu, use the Arrow buttons to highlight Color Tuner, and then press OK. The Color Tuner menu is displayed. 1. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the 11 Point White Balance menu is displayed.
5 To show or hide the Color Bar Test Pattern: To show or hide the Flat Test Pattern: 1. Ensure that you are on an input that is displaying active content. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the Color Bar Test Pattern menu is displayed. 1. Ensure that you are on an input that is displaying active content.
5 To show or hide the Ramp Test Pattern: Creating a Custom Picture Mode 1. Ensure that you are on an input that is displaying active content. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the Ramp Test Pattern menu is displayed. Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources. Ramp Test Pattern • Custom picture modes can be created manually.
5 Renaming a Custom Picture Mode Locking and Unlocking the Custom Picture Modes Automatically-created custom picture modes are given generic names, beginning with "Custom 1," but you can rename custom picture modes to make them easy to remember. Custom picture modes can be locked with a unique PIN to prevent accidental changes to their settings. To rename a custom picture mode: 1. Set the Picture Mode to an existing custom setting. See Adjusting the Picture Settings on page 23. 2.
5 Deleting a Custom Picture Mode Custom picture modes that are no longer needed can be deleted. Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode. To delete a custom picture mode: 1. From the PROFESSIONAL PICTURE menu, use the Arrow buttons to highlight Delete Picture Mode, and then press OK. The DELETE PICTURE MODE window is displayed. To delete the user created Custom 1 picture mode, select the Delete button. Delete Cancel 2.
5 ADJUSTING THE AUDIO SETTINGS the left and right speakers. • Lip Sync - Adjusts the synchronization between the display image and the accompanying audio track. To adjust the audio settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed. 3.
5 Changing the Equalizer Settings Deleting the Custom Audio Mode The graphic equalizer has several pre-set modes and allows you to create one custom mode. To delete the custom audio mode that has been created: To select a pre-set audio mode: 1. Press the MENU button on the remote. The on-screen menu is displayed. 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed. 2.
5 SETTING TIMERS Setting the Auto Power Off Feature This TV has several timers to save energy and to turn off when you go to sleep. To help save energy, your TV is set by default to turn off after 10 minutes without a video or audio signal. This feature can be deactivated. Setting the Sleep Timer To set the Auto Power Off feature: When activated, the TV’s sleep timer will turn the TV off after a set period of time. 1.
5 USING THE NETWORK CONNECTION MENU Changing the Manual Setup Settings Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-N. Connecting to a Wireless Network To connect to a wireless network whose network name (SSID) is being broadcast: If your TV is connected to a network with an Ethernet cable, you will not see the wireless network connection menu. You must disconnect the Ethernet cable to set up a wireless network connection. 1.
5 Finding MAC Addresses for Network Setup Connecting to a Hidden Network The security settings on your router may require you to enter the TV's MAC address in the router's settings. To connect to a wireless network whose network name (SSID) is not being broadcast: To find the TV's MAC address: 1. From the NETWORK menu, highlight Hidden Network and press OK. The ENTER ACCESS POINT NAME screen is displayed. 1. From the NETWORK menu, highlight Manual Setup and press OK.
5 SETTING UP THE TUNER Selecting a Tuner Input You can use the TV’s Tuner menu to: Select the type of tuner input you will be using.You can select either Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
5 Adding New Channels To add a single new analog channel: Occasionally, you may need to add a new range of channels or add a new analog channel. You can do this by using the Partial Channel Scan and Add Analog Channel options. This is quicker than scanning all possible channels. 1. From the TUNER menu, highlight Add Analog Channel and press OK. The ADD ANALOG CHANNEL menu is displayed. To add a range of new channels: 2.
5 Skipping Channels After a channel scan is completed, you may find that some channels are too weak to watch comfortably. There may also be some channels you do not want to view. You can remove these channels from the TV’s memory with the Skip Channel feature. Channels that have been removed with the Skip Channel feature can still be viewed if the channel is entered using the Number Pad. If you wish to completely block a channel from being viewed, use the parental controls.
5 LISTENING TO ALTERNATE AUDIO Changing the Digital Audio Language Changing the Analog Audio Language Some digital over-the-air (free), cable, and satellite channels broadcast programs in more than one language. The TV’s Digital Audio feature allows you to listen to audio in alternate languages. Some analog over-the-air (free) and cable channels broadcast programs in more than one language.
5 SETTING UP CLOSED CAPTIONING Changing the Appearance of Digital Closed Captions Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. Digital closed captions can be displayed according to your preference. See the diagram on the next page for an explanation of the parts of the closed caption area.
5 • Background Color - Change the color of the background directly behind the text. Typical choices include: • Background Opacity - Change the transparency of the background directly behind the text. • Window Color - Change the color of the closed captioning box. • Window Opacity - Change the opacity of the closed captioning box. • Opaque background, transparent window—Only a strip of background appears behind the text, expanding as the text appears. This is the typical "As Broadcast" mode.
5 RENAMING DEVICES ON THE INPUT MENU Inputs can be renamed to make them easier to recognize on the Input menu (see Changing the Input Source on page 21). For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.” To change the name of an input: Input Port VIZIO 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Devices and press OK. The DEVICES menu is displayed.
5 CHANGING THE TV SETTINGS Viewing System Information To view a summary of the TV settings: Using the System menu, you can: 1. Press the MENU button on the remote. The on-screen menu is displayed.
5 Changing the On-Screen Menu Language Setting the Time & Local Settings Your TV can display the on-screen menu in different languages. To ensure the correct time is displayed when you press the INFO button, set the TV’s time zone: To change the on-screen menu language: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. 1. Press the MENU button on the remote.
5 Using the Parental Controls Enabling or Disabling Program Ratings The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs without a password. To manage program content according to its rating, you must enable the Program Rating feature.
5 Blocking and Unblocking Content by Rating A channel may sometimes broadcast programs that are meant for children, and at other times broadcast programs that are meant for mature audiences. You may not want to block the channel completely using a channel lock, but you may wish to block certain programs from being viewed. When this is the case, you can use the TV’s Rating Block feature to block content based on its rating. For a list of content ratings and their definitions, visit www.tvguidelines.org.
5 Adjusting the CEC Settings Turning the Power Indicator On or Off The CEC function on your TV enables you to control HDMI-connected devices with the included remote without any additional programming. The Power Indicator on the front of your TV normally does not glow when the TV is on. You can change this setting if you prefer the light to be on. To turn the Power Indicator Light on or off: Not all HDMI devices support CEC. See your device’s user manual for details. 1.
5 USING THE RESET & ADMIN MENU USING THE GUIDED SETUP MENU You can use the TV’s Reset & Admin menu to restore the TV to its factory default settings. Using Guided Setup Restoring the TV to Factory Default Settings All of the on-screen menu settings can be reset to the factory defaults. If you restore the TV to the factory default settings, all changes you have made to the settings will be lost! The TV’s Setup App can be used to easily set up the TV tuner or to connect the TV with your network.
5 USING THE INFO WINDOW The Info Window can be displayed by pressing the INFO or GUIDE button on the remote: • Press the INFO or GUIDE button one time to display channel, input, and display information. • Press the INFO or GUIDE button two times to display the program title, program rating, audio information, and the start and end times of the program.
6 Using the USB Media Player USING THE USB MEDIA PLAYER Playing USB Media The USB Media Player allows you to connect a USB thumb drive to your TV and play music, video, or photos. USB PORT To play your USB media: 1. Connect your USB thumb drive to the USB port on the side of the TV. 2. Press the V button on the remote. 3. Use the Arrow buttons to highlight the Multimedia app in the V.I.A. Plus Dock and press OK. (The highlighted App is in the center of the dock.) 4.
6 Back Button Highlight this button and press OK to return to the previous screen. Connected Sources Displays connected USB devices. VIZIO Progress Bar Displays the duration of the currently-playing song. The blue bar will lengthen as the song progresses. Album Art If included on the USB thumb drive and associated with your music, the album art will display here.
6 Back Button Highlight this button and press OK to return to the previous screen. Connected Sources Displays connected USB devices.
6 Back Button Highlight this button and press OK to return to the previous screen. Connected Sources Displays connected USB devices. VIZIO Photo Current Folder Displays the folder path. VIZIO_2GB\Photo\root USB1: Current Folder root Start Fullscreen Slideshow A.jpg B.jpg C.jpg D.jpg E.jpg F.jpg H.jpg I.
7 Using VIZIO Internet Apps Plus® (V.I.A. Plus) Vizio Internet Apps Plus (V.I.A. Plus) delivers popular online content to your TV. V.I.A. Plus features a selection of Apps that allow you to watch movies and TV shows, listen to music, get weather and news information, and more—all on demand. Using the Hot Keys Use the following colored buttons on the remote to perform common V.I.A. Plus tasks: • Yellow - Not used. • Blue - Change the size of the main display window when an App is open in the sidebar.
7 USING THE FULLSCREEN V.I.A. PLUS APPS WINDOW The Fullscreen V.I.A. Plus Apps Window allows you to add and store Apps. The Apps on the first page are displayed in the Dock and Apps on additional pages can be moved to the Dock. To open the Fullscreen V.I.A. Plus Apps Window: 3. Press the OK button on the remote to launch the App. 4. To exit from an open App or to close the App Dock, press the Exit button on the remote. 1. Press the V Button on the remote twice. 2.
7 FULLSCREEN V.I.A. PLUS APPS WINDOW OVERVIEW The Fullscreen V.I.A. Plus Apps Window allows you to add, delete, and organize your Apps. The My Apps tab displays Apps that are already installed on your TV. The Apps on the first page are displayed in the V.I.A. Plus App Dock. Apps with a small lock icon in the right-hand corner cannot be deleted. • All Apps: Displays every App that is available for download.
7 CUSTOMIZING THE V.I.A. PLUS APPS WINDOW Deleting an App from the My Apps Tab You can add, delete, and move Apps around on your My Apps tab for a custom look and feel. Adding an App to the My Apps Tab To delete an App from your TV: 1. Use the Arrow buttons on the remote to highlight the App you wish to delete. 2. Press and hold the OK button. The following options appear: To add an App to your TV: 1. Use the Arrow buttons on the remote to highlight the App you wish to add.
7 Moving an App in My Apps You can organize your Apps on your My Apps tab by moving them where you want. To move the Apps on your My Apps tab: 3. Use the Arrow buttons to move the App to the desired location and press OK to place the App. When you can move the App, it appears as shown below. Note: App location, appearance, and availability subject to change without notice. 1. Use the Arrow buttons on the remote to highlight the App you wish to move. 2. Press and hold the OK button.
Troubleshooting & Technical Support A DO YOU HAVE QUESTIONS? LET US HELP! YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT The VIZIO support team is highly trained and is based in the United States. We can help with: • New Product Setup • Connecting Your Devices • Technical Problems • And More Phone: (877) 878-4946 (TOLL-FREE) Email: techsupport@VIZIO.com Web: www.VIZIO.
A There is no sound. • Press Volume Up on the remote control. The TV displays “No Signal.” • Press the INPUT button on the remote control to select a different input source. • If you are using an antenna or cable TV connected directly to the TV, scan for channels. See Scanning for Channels on page 36. There is no power. • Ensure the TV is plugged into a working electrical outlet. • Ensure the power cable is securely attached to the TV.
A The TV has pixels (dots) that are always dark or always lit. • Your HDTV is precision-manufactured using an extremely high level of technology. However, sometimes pixels may not display correctly. These types of occurrences are inherent to this type of product and do not constitute a defective product. The buttons on the remote aren’t working. • The Red and Yellow hot key buttons below the V button do not operate with this model. • Ensure you are only pressing one button at a time.
B Specifications E600i-B3 E700i-B3 60" Class 70" Class 60.10" 69.50" 53.26" x 32.85" x 8.66" 53.26" x 30.96" x 2.53" 61.70" x 37.77" x 9.84" 61.70" x 35.85" x 2.68" 52.91 lbs 46.30 lbs 66.14 lbs 57.54 lbs D-LED D-LED 120 Hz (Effective Refresh Rate) 120 Hz (Effective Refresh Rate) 1920 x 1080 1920 x 1080 0.693 mm (H) x 0.693 mm (V) 0.801 mm (H) x 0.
B E600i-B3 E700i-B3 Audio Outputs: RCA Stereo, Optical Digital RCA Stereo, Optical Digital OSD Language: English, Spanish, French English, Spanish, French Yes Yes XRT112 XRT112 Certifications: UL, CUL, FCC Class B, HDMI (CEC, ARC), Dolby Digital Plus UL, CUL, FCC Class B, HDMI (CEC, ARC), Dolby Digital Plus Compliance: Energy Star 6.0 Energy Star 6.1 120V @ 60 Hz 120V @ 60 Hz 86.
C Limited Warranty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only. VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one (1) year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
D Legal & Compliance FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
D VIZIO Internet Applications Disclaimer VIZIO SOFTWARE LICENSE AGREEMENT VIZIO Internet Applications (“VIA”) affords the opportunity to access third party Internet product offerings or services (“VIA Services”) on certain VIZIO TVs. The VIA Services accessible herein are provided as per our agreement with these third parties. These agreements are subject to change, interruption, suspension (including termination) at any time and for various reasons.
D related information, including but not limited to information about your use of the VIZIO Software, the VIA Services, content viewed and attached peripherals, products or services purchased, that is gathered periodically to facilitate the provision of software updates, product support and other services to you, including additional or different VIA Services related to the VIZIO Software and to verify compliance with the terms of this License Agreement.
D AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY BY JURISDICTION. 11. Disclaimer of Warranties. YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE VIZIO SOFTWARE AND VIA SERVICES (AS DEFINED ABOVE) IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY AND EFFORT IS WITH YOU.
© 2014 VIZIO INC. ALL RIGHTS RESERVED.
