VIZIO VX37L HDTV10A User Manual Dear VIZIO Customer, Congratulations on your new VIZIO VX37L High Definition LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO VX37L High Definition Television. For assistance, please call 714-668-0588 or email us at techsupport@vinc.com.
VIZIO VX37L HDTV10A User Manual THIS PRODUCT HAS BEEN DESIGNED AND TESTED FOR COMPLIANCE WITH REGULATORY SAFETY CERTIFICATIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display.
VIZIO VX37L HDTV10A User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
VIZIO VX37L HDTV10A User Manual Opening the Package Your VIZIO VX37L HDTV10A and it accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that the VX37L HDTV10A is in good condition and that all of the accessories are included. The VX37L HDTV10A weighs approximately 44lb and is over 36” wide; we advise that you have at least 2 people to unpack and install the HDTV.
VIZIO VX37L HDTV10A User Manual Installation Preparation Please read this user manual carefully before installing your VIZIO HDTV. The power consumption of the TV is about 210W, please use the power cord designated for TV. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be defeated. The TV should be installed on a flat surface to avoid tipping.
VIZIO VX37L HDTV10A User Manual Table of Contents Chapter 1 Basic Controls and Connections .................................................................. 8 1.1 Front Panel..........................................................................................................................................................8 1.2 Right Side Panel Controls ...................................................................................................................................8 1.
VIZIO VX37L HDTV10A User Manual 4.4.4 Time Zone .................................................................................................................................................36 4.4.5 Daylight Saving..........................................................................................................................................36 4.5 DTV / TV Input Setup .................................................................................................................................
VIZIO VX37L HDTV10A User Manual Chapter 1 Basic Controls and Connections 1.1 Front Panel Power ‘VIZIO’ light – The VIZIO name lights white when powered on and orange when powered off. Remote Control Sensor – This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal. 1.2 Right Side Panel Controls Power ( ) – Switch the VX37L on by pressing the button once.
VIZIO VX37L HDTV10A User Manual 1.4 Rear Panel Connections 1 2 4 3 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 5 6 8 9 10 7 AC IN – Plug-in the supplied AC Power Cord here. SERVICE – This custom communication port is for factory service only. HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection.
VIZIO VX37L HDTV10A User Manual 1.5 VIZIO Remote Control Remote LED – Blinks when the remote operates. POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the Standby mode. Number Button Pad – Use these buttons to select a channel or enter a password. INPUT – This button allows the user to cycle through the inputs. - (Dash) – When selecting a digital channel directly use this button for the separation of main and sub-channels.
VIZIO VX37L HDTV10A User Manual WIDE – This button cycles through the available screen formats. The options for SD (Standard Definition 4:3) are Normal, Zoom and Panoramic. . The options for HD (High Definition 16:9) and RGB PC are Normal and Zoom. SLEEP – This button allows the user to select the sleep options by adjusting the timer for 30, 60, 90 or 120 minutes. MTS – This button will select the MTS options of Stereo, SAP or Mono in TV mode and alternate audio channels, where available, in DTV mode.
VIZIO VX37L HDTV10A User Manual 1.5.1 Insertion of Batteries in the Remote Control Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover. Precautionary Tips for Inserting the Batteries: Only use the specified AA batteries. Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.
VIZIO VX37L HDTV10A User Manual Chapter 2 Connecting Equipment 2.1 Which Video Connection Should I Use? The VIZIO VX37L has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays. Rear Panel Color Codes Description White HDMI (High-Definition Multimedia Interface) - It is the first and only industry-supported, uncompressed, all-digital audio/video interface.
VIZIO VX37L HDTV10A User Manual 2.2 Connecting Your DVD Player You have several options for connecting your DVD player to your VX37L; HDMI, Component, AV (SVideo or Composite) inputs. Based on your configuration, you can decide which option is right for you. 2.2.1 Using HDMI DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the VIZIO VX37L for optimal results.
VIZIO VX37L HDTV10A User Manual 2.2.2 Using Component Video Connecting your DVD Player (Better): 1. 2. 3. 4. 5. 6. 7. Turn off the power to the HDTV and DVD player. Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
VIZIO VX37L HDTV10A User Manual 2.2.3 Using S-Video (AV1) Connecting your DVD Player (Good): 1. 2. 3. 4. 5. Turn off the power to the HDTV and DVD player. Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV1 group on the side of the HDTV.
VIZIO VX37L HDTV10A User Manual 2.3 Connecting Your HDTV Set-Top Box 2.3.1 Using HDMI HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results. Note: To maintain the display quality, use a VIZIO certified HDMI cable that is 10 meters. See www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623) for details. Connecting your HDTV Set-Top Box (Best): 1. 2. 3. 4. Turn off the power to the HDTV and HDTV Set-Top Box.
VIZIO VX37L HDTV10A User Manual For HDTV Set-Top Boxes with DVI: 1. 2. 3. 4. 5. Turn off the power to the HDTV and HDTV Set-Top Box. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI Input (white color area) at the rear of the HDTV.
VIZIO VX37L HDTV10A User Manual 2.3.2 Using Component Video Connecting your HDTV Set-Top Box (Better): 1. 2. 3. 4. 5. 6. 7. Turn off the power to the HDTV and HDTV Set-Top Box. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y (green color) connector in the Component 1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
VIZIO VX37L HDTV10A User Manual 2.4 Connecting Your Basic Set-Top Box 2.4.1 Using Composite Video 1. 2. 3. 4. 5. Turn off the power to the HDTV and Set-Top Box. Using the AV Cable, connect the Video (yellow color) connector on your Set-Top Box to the corresponding Video (yellow color) connector in the AV2 group (yellow color area) at the rear of the HDTV.
VIZIO VX37L HDTV10A User Manual 2.5 Connecting Your VCR or Video Camera 1. 2. 3. 4. 5. Turn off the HDTV and VCR or Video Camera. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the AV1 group on the side of the HDTV.
VIZIO VX37L HDTV10A User Manual 2.6.2 Using Your Antenna or Cable for TV 1. 2. 3. 4. Turn off the power to the HDTV. Connect the coaxial (RF) connector from your antenna or cable (out-of-the-wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA connector at the rear of the HDTV Turn on the power to the HDTV. Select TV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control. 2.6.3 Using the Antenna or Cable through your VCR 1. 2. 3. 4.
VIZIO VX37L HDTV10A User Manual 2.7 Connecting a PC Computer 1. 2. Turn off the power to the HDTV and PC Computer. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (blue area) at the rear of the HDTV. Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the rear of the HDTV. Turn on the HDTV and PC Computer.
VIZIO VX37L HDTV10A User Manual Chapter 3 Setting Up to Watch Television For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 5. 3.1 Basic LCD HDTV Start Up 1. Connecting the Power Cable Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an AC wall socket. 2. Connect Audio and Video Cables to the HDTV (see pages 13 ~ 23 for detailed steps) 3.
VIZIO VX37L HDTV10A User Manual b. The Language choice screen will be displayed; the default English option is highlighted. If you wish to change the OSD language to Français or Español, press the button on the remote control to select the language you want. Press the button on the remote to go to the next screen. c. The Tuner screen will be displayed; default choice is Antenna. If you are using Cable, press the button to highlight CABLE. Press the button on the remote to go to the next screen. d.
VIZIO VX37L HDTV10A User Manual e. The screen will now change to show the progress of the search for Analog (NTSC) and Digital (ATSC) channels. Note: DTV digital broadcast is not available in all areas. Refer to www.antennaweb.org to get information about availability in your area, type of antenna and in which direction to point your antenna. The channel availability through cable depends upon which channels your cable operator supplies in Clear QAM; consult your cable operator for more information. f.
VIZIO VX37L HDTV10A User Manual 3.3 Watching a TV Program Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. 1. 2. Press the power button on the remote or on the side of the HDTV. The VIZIO logo on the front will change from orange to white. There are 3 options for selecting your programming: a.
VIZIO VX37L HDTV10A User Manual 3.5 Program Information Press the GUIDE button on the remote and program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner. Press the or button to scroll up or down the channels. Each time you pause at a channel, the program list will update with the program schedule for the channel and the window will show the live program for that channel.
VIZIO VX37L HDTV10A User Manual Chapter 4 Advanced Adjustment of HDTV 4.1 Using the On Screen Display (OSD) The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and other settings. The TV will save changes made to the settings, even if the TV is turned off.
VIZIO VX37L HDTV10A User Manual 4.2 DTV / TV Input Picture Adjustment 4.2.1 Picture Mode When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to highlight the Picture Mode selection. Use the or button to choose from Custom, Standard, Movie and Game. If Standard, Movie or Game is chosen for the Picture Mode, then the only Picture Adjustments available for you are for the Backlight and Advanced Video; the rest are preset. 4.2.
VIZIO VX37L HDTV10A User Manual 4.2.3 Brightness Press the button to highlight the Brightness selection. Press the button to start adjusting the brightness and the menu page will disappear and be replaced by a small Brightness Indicator Bar so you can see the brightness level between the minimum and maximum available levels. Use the or button to adjust the level. The Brightness adjusts the black levels in the picture.
VIZIO VX37L HDTV10A User Manual 4.2.7 Sharpness Press the button to highlight the Sharpness selection. Press the button to start adjusting the sharpness and the menu page will disappear and be replaced by a small Sharpness Indicator Bar so you can see the sharpness level between the minimum and maximum available levels. Use the or button to adjust the level. The Sharpness adjusts the sharpness of the picture. 4.2.
VIZIO VX37L HDTV10A User Manual 4.2.9 Advanced Video Press the button to highlight the option for Advanced Video selection and press the OK button. A new menu will be displayed showing the advanced functions available for fine tuning of the picture. DNR Press the button to highlight DNR (Dynamic Noise Reduction). Use this feature to diminish picture artifacts caused by the digitizing of image motion content that may be present in the picture.
VIZIO VX37L HDTV10A User Manual 4.3 DTV / TV Input Audio Adjustment 4.3.1 Volume When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the AUDIO ADJUST page. Press the button to highlight the Volume selection. Press the button to start adjusting the volume and the menu page will disappear and be replaced by a small Volume Indicator Bar so you can see the volume level between the zero and maximum available levels.
VIZIO VX37L HDTV10A User Manual 4.3.5 Surround Press the Press the button to highlight the Surround selection. button to select for the simulated surround sound feature to be On or Off. 4.3.6 Speakers Press the button to highlight the Speakers selection. Press the button to turn the internal speakers On or Off. You may want to turn-off the internal speakers when listening to the audio through your Home Theatre System. 4.
VIZIO VX37L HDTV10A User Manual 4.4.4 Time Zone Setting the correct Time Zone for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control. Press the button to highlight the Auto Search selection. Press the button to select your area. 4.4.5 Daylight Saving As for Time Zone, setting the daylight saving time for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control.
VIZIO VX37L HDTV10A User Manual 4.5.5 Digital Closed Caption Style When selecting Digital Closed Caption you are also able to customize the look of the Closed Caption. Press the button to highlight the Digital CC Style selection. The default is Broadcast which means the style is the same as the broadcast channel has chosen for transmission. Press the button to select Custom. The Custom page allows you to change the font size and color, the background color, and the transparency of the Closed Caption. 4.5.
VIZIO VX37L HDTV10A User Manual 4.6 DTV / TV Input Parental Control 4.6.1 Channel Block If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV. When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the PARENTAL page.
VIZIO VX37L HDTV10A User Manual 4.6.2 TV Rating Follow the procedure in the previous section 4.6.1 to display the Parental Control menu and then press the button to highlight the TV Rating selection. Press the button and the Block TV Rating panel will be displayed.
VIZIO VX37L HDTV10A User Manual 4.6.4 Blocked Unrated Programming Follow the procedure in the previous section 4.6.1 to display the Parental Control menu and then press the button to highlight the Block Unrated TV selection. Press the button to turn-on or turn-off the blocking of programming that does not have a rating. 4.6.5 Change the Password Press the button to highlight the Access Code Edit selection. Press the button and the new Password panel will be displayed.
VIZIO VX37L HDTV10A User Manual 4.7 HDMI Input Picture Adjustment The Picture Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV or Parental Control adjustments. 4.8 HDMI Input Audio Adjustment The Audio Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.3.
VIZIO VX37L HDTV10A User Manual 4.10 Video Input Picture Adjustment The Picture Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV adjustments. 4.11 Video Input Audio Adjustment The Audio Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.3.
VIZIO VX37L HDTV10A User Manual 4.13 Video Input Parental Control The Parental Control menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.6. The menu difference is that there is no icon along the top for DTV / TV adjustments. 4.14 PC Input Picture Adjustment The Picture Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 4.2 for Backlight, Contrast, Brightness and Color Temperature. 4.14.
VIZIO VX37L HDTV10A User Manual The Brightness adjusts the black levels in the picture. If the brightness is too low you will not be able to see the detail in darker parts of the picture and if the brightness is too high the picture will look washed out. 4.14.4 Contrast Press the button to highlight the Contrast selection.
VIZIO VX37L HDTV10A User Manual 4.14.6 H-SIZE Press the button to highlight the H-Size selection. Press the button to start adjusting the horizontal size of the picture. Use the the horizontal size. or button to adjust 4.14.7 H. Position Press the button to highlight the Horizontal Shift selection. Press the button to start adjusting the horizontal position of the picture. Use the adjust the horizontal position. or button to 4.14.8 V.
VIZIO VX37L HDTV10A User Manual 4.17 Understanding Viewing Features Your HDTV features four viewing modes and Picture-In-Picture (PIP) mode. You can switch viewing modes using the remote control. 4.17.1 Viewing Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image. Standard TV broadcasts are displayed with a 4:3 Aspect Ratio. Movies in 4:3 Aspect Ratio may be referred to as pan-and-scan or full frame.
VIZIO VX37L HDTV10A User Manual 4.17.2 Picture-In-Picture(PIP) Mode Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you can display two pictures at one time. One picture is displayed as the full screen (main screen) and the other picture is displayed in a small window (sub screen). The sub-screen can be set to small, medium or large. See below for detailed information regarding the PIP sources.
VIZIO VX37L HDTV10A User Manual 4.17.4 Setting the Sleep Timer The Sleep Timer lets you set a time delay to turn off the LCD HDTV automatically. To set the Sleep Timer using the remote control: 1. Press the SLEEP button on the remote control. The Sleep Timer appears in the center of you screen. 2. Press the SLEEP button one or more times to select the time you want. The choices are 30, 60, 90 or 120 minutes.
VIZIO VX37L HDTV10A User Manual Chapter 5 Maintenance and Troubleshooting 5.1 Maintenance Important 1. 2. Make sure that the power cable is removed from the socket before cleaning the TV. Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may damage the housing, screen glass and remote control, and cause paint to peel. Cleaning the Housing and Remote Control 1. 2. Use the VIZIO soft cloth (included) for cleaning.
VIZIO VX37L HDTV10A User Manual Problem Solution Power is ON but no screen image. Make sure the video cable supplied with the TV is secured to the correct video output port on the back of the VCR and the TV. Make any cable you have attached to the TV is secured to the correct output your Set-Top Box, DVD, etc. Adjust brightness and contrast. Check Source settings. Wrong or abnormal colors appear.
VIZIO VX37L HDTV10A User Manual Tips for High-Definition Users. The LCD HDTV is an ideal platform for viewing High Definition Content. Best Image Quality will be achieved by the HDMI Input, then YPbPr, then RGB. However, due to variances in broadcast practices, it is possible some image distortions can occur. Tips for Letterbox Content Users. Letterboxed (or “Widescreen”) versions of DVD movies are most commonly formatted for standard 4:3 Televisions.
VIZIO VX37L HDTV10A User Manual 5.4 Compliance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. USA Canada Germany UK Japan UL CSA VDE BASE/BS Electric Appliance Control Act 5.5 FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
VIZIO VX37L HDTV10A User Manual Chapter 6 Miscellaneous Information 6.1 Specifications Specifications Panel 37” Diagonal, 16:9 Aspect Ratio Resolution 1366 x 768 pixels Pixel (Dot) Pitch 0.6mm (H) x 0.6mm (V) Display Compatibility HDTV (720P) Signal Compatibility 480i (SDTV), 480P (EDTV), 720P (HDTV), 1080i (HDTV) Colors 16.
VIZIO VX37L HDTV10A User Manual 6.2 Glossary – Standard Definitions Analog TV: Today’s TV system using radio frequency waves to transmit and display pictures and sound. Aspect Ratio (4x3): Traditional TV “aspect ratio”, that is, the screen’s width as compared to its height. For example, a “32 inch TV screen” would be 25 inches wide and 19 inches tall. Aspect Ratio (16x9): “Wide screen TV” aspect ratio which is more like a movie screen than a traditional TV.
VIZIO VX37L HDTV10A User Manual 6.
VIZIO VX37L HDTV10A User Manual P Parental Control Block Unrated Programming, 40 Channel Block, 38 Movie Rating, 39 Password change, 40 TV Rating, 39 PC Input Audio Adjustment, 45 Picture Adjustment, 43 Setup, 45 PC Picture Adjust Auto Adjust, 43 Fine Tune, 45 Horizontal Position, 45 Horizontal Size, 45 Vertical Position, 45 PC Resolutions, 23 PIP and POP Inputs, 47 R Remote Batteries, 12 Layout, 10, 12 Range, 12 Remote Control Setting the Sleep Timer, 48 Using your Cable or Satellite Remote to Operate yo
VIZIO VX37L HDTV10A User Manual 6.4 Limited Product Warranty Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor and is only valid when purchased from an Authorized Reseller, only on new and non-refurbished product, and available to customers in the Continental US, Alaska, Hawaii and Puerto Rico. See below for the VIZIO Extended Service warranty.