VIZIO VXW20L HDTV10A User Manual Dear VIZIO Customer, Congratulations on your new VIZIO VXW20L HDTV10A High Definition LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO VXW20L HDTV10A High Definition Television. For assistance, please call 877- 698- 4946 e-mail us at techsupport@vizio.com.
VIZIO VXW20L HDTV10A User Manual THIS PRODUCT HAS BEEN DESIGNED AND TESTED FOR COMPLIANCE WITH REGULATORY SAFETY CERTIFICATIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display.
VIZIO VXW20L HDTV10A User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
VIZIO VXW20L HDTV10A User Manual Opening the Package Your VIZIO VXW20L HDTV10A and it accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that the VXW20L HDTV10A is in good condition and that all of the accessories are included. The VXW20L HDTV10A weighs approximately 17lb and is about 20” wide; please exercise care when unpacking the HDTV.
VIZIO VXW20L HDTV10A User Manual Additional Certified Accessories for the VIZIO VXW20L HDTV10A are sold separately Wall Mounts High Definition Cables Extra or replacement Remote VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VXW20L HDTV10A To purchase or inquire about additional accessories and services for your VIZIO product, visit our web site at www.VIZIO.
VIZIO VXW20L HDTV10A User Manual Preparing Your LCD HDTV for Wall Mounting The VIZIO VXW20L HDTV10A can either be kept on the stand base or mounted on the wall for viewing. If you choose to mount the VXW20L HDTV10A on the wall, please follow the instructions below for removing the stand base. To remove the stand base 1. Unplug all of the cables and cords from your VXW20L HDTV10A. 2. Place the VXW20L HDTV10A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
VIZIO VXW20L HDTV10A User Manual Table of Contents Chapter 1 Basic Controls and Connections .................................................................. 9 1.1 Front Panel..........................................................................................................................................................9 1.2 Side Panel Controls.............................................................................................................................................9 1.
VIZIO VXW20L HDTV10A User Manual 4.4.2 Auto Search...............................................................................................................................................44 4.4.3 Skip Channel .............................................................................................................................................44 4.4.4 MTS ...............................................................................................................................................
VIZIO VXW20L HDTV10A User Manual Chapter 1 Basic Controls and Connections 1.1 Front Panel Power light – A green light indicates TV is powered on and red light indicates TV is powered off or standby. Remote Control Sensor – This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal. 1.2 Side Panel Controls POWER ( ) – Switch the VXW20L HDTV10A on by pressing the button once.
VIZIO VXW20L HDTV10A User Manual 1.3 Rear Panel Connections 1 2 3 7 1. 2. 6 5 4 8 AC IN – Plug-in the supplied AC Power Cord here. SERVICE – This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service will void the manufacturer’s warranty of this equipment. 3. HDMI – Connect the source of digital video such as a DVD multimedia player or set top box through this all digital connector.
VIZIO VXW20L HDTV10A User Manual 1.4 Right-Side Panel Connection 1. HEADPHONE – Connect your headphone here for personalized listening without disturbing others. 1 1.5 VIZIO Universal Remote Control GUIDE – This button displays program information. Press this button once and the information of the program being viewed is shown. Press it a second time and the Electronic Programming Guide will appear in the screen. POWER – Press this button to turn the TV on from the Standby mode.
VIZIO VXW20L HDTV10A User Manual 1.5.1 Insertion of Batteries in the Remote Control Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover. Precautionary Tips for Inserting the Batteries: Only use the specified AA batteries. Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.
VIZIO VXW20L HDTV10A User Manual Chapter 2 Connecting Equipment 2.1 Which Video Connection Should I Use? The VIZIO VXW20L HDTV10A has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays.
VIZIO VXW20L HDTV10A User Manual 2.2 Connecting Coaxial (RF) 2.2.1 Using Your Antenna or Digital Cable for DTV 1. 2. 3. 4. Turn off the power to the HDTV. Connect the coaxial (RF) connector from your antenna or digital cable (out-ofthe-wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA connector on the rear of the HDTV. Turn on the power to the HDTV. Select DTV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control.
VIZIO VXW20L HDTV10A User Manual 2.3 Connecting Your HDTV Set-Top Box 2.3.1 Using HDMI Input HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results. Note: To maintain the display quality, use a VIZIO certified HDMI cable that is 10 meters. See www.vizioce.com or call 1-888-VIZIOCE (1-888-849-4623) for details. Connecting your HDTV Set-Top Box (Best): 1. 2. 3. 4. Turn off the power to the HDTV and HDTV Set-Top Box.
VIZIO VXW20L HDTV10A User Manual For HDTV Set-Top Boxes with DVI: 1. 2. 3. 4. 5. Turn off the power to the HDTV and HDTV Set-Top Box. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI Input (white color area) at the rear of the HDTV.
VIZIO VXW20L HDTV10A User Manual 2.3.2 Using Component Video Connecting your HDTV Set-Top Box (Better): 1. 2. 3. 4. 5. 6. 7. Turn off the power to the HDTV and HDTV Set-Top Box. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y (green color) connector in the Component group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
VIZIO VXW20L HDTV10A User Manual 2.4 Connecting Your Basic Set-Top Box 2.4.1 Using Composite Video 1. 2. 3. 4. 5. Turn off the power to the HDTV and Set-Top Box. Using the AV Cable, connect the Video (yellow color) connector on your Set-Top Box to the corresponding Video (yellow color) connector in the AV input (yellow color area) at the rear of the HDTV.
VIZIO VXW20L HDTV10A User Manual 2.5 Connecting Your DVD Player You have several options for connecting your DVD player to your VXW20L HDTV10A; HDMI, Component, AV (S-Video or Composite) inputs. Based on your configuration, you can decide which option is right for you. 2.5.1 Using HDMI Input DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the VIZIO VXW20L HDTV10A for optimal results.
VIZIO VXW20L HDTV10A User Manual For DVD Players with DVI: 1. 2. 4. 5. Turn off the HDTV and DVD player. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the HDMI Input (white color area) at the rear of the HDTV. 3. Connect an audio cable (white and red connectors) to the audio output connectors associated with the DVI output of the DVD player and connect the other end to the audio connectors by the HDMI input (white area) at the rear of the HDTV.
VIZIO VXW20L HDTV10A User Manual 2.5.2 Using Component Video Connecting your DVD Player (Better): 1. 2. 3. 4. 5. 6. 7. Turn off the power to the HDTV and DVD player. Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component input (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
VIZIO VXW20L HDTV10A User Manual 2.5.3 Using S-Video (AV/S-VIDEO) Connecting your DVD Player (Good): 1. 2. 3. 4. 5. Turn off the power to the HDTV and DVD player. Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV/S-VIDEO input (yellow/red area) at the rear of the HDTV.
VIZIO VXW20L HDTV10A User Manual 2.6 Connecting Your VCR or Video Camera 1. 2. 3. 4. 5. Turn off the HDTV and VCR or Video Camera. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the AV input (yellow/red area) at the rear of the HDTV.
VIZIO VXW20L HDTV10A User Manual 2.7 Connecting an external Receiver/Amp 2.7.1 Optical Programs Output of Audio received with HD If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO OUT (white area) at the rear of the VXW20L HDTV10A. This is active no matter which input (AV, Component, etc) is being used. 1. 2. Turn off the power to the LCD HDTV and Receiver/Amp.
VIZIO VXW20L HDTV10A User Manual 2.8 Connecting a PC Computer 1. 2. 3. 4. 5. Turn off the power to the HDTV and PC Computer. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (blue area) at the rear of the HDTV. Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the rear of the HDTV. Turn on the HDTV and PC Computer.
VIZIO VXW20L HDTV10A User Manual Chapter 3 Setting Up to Watch Television For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 6. 3.1 Basic LCD HDTV Start Up 1. Connecting the Power Cable Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an AC wall socket. 2. Connect Audio and Video Cables to the HDTV (see pages 13 ~ 25 for detailed steps) 3.
VIZIO VXW20L HDTV10A User Manual b. The Tuner screen will be displayed; default choice is Antenna. If you are using Cable, press the button to highlight CABLE. Press the button on the remote to go to the next screen. c. The Channel Scan screen will be displayed; default choice is Scan. Press the button on the remote control to commence the search for available channels to be stored into memory. If you do not want to scan for channels at this time, press the LAST key on the remote control.
VIZIO VXW20L HDTV10A User Manual e. When finished, the Complete screen will be displayed to inform you that the HDTV has completed the Initial Setup. Press the button on the remote control to exit and begin watching TV. 5. Select Input Source Select the Input Source for the HDTV by pressing the INPUT button on the side of the TV or using the Input button on the remote control. Pressing this button will cycle you through the following options: TV, AV (S-VIDEO), Component, RGB, and HDMI.
VIZIO VXW20L HDTV10A User Manual Note: The TV set will be displaying any television station or program selected by the Cable Box, VCR, External Tuner or Satellite Receiver. The TV set will not be able to change programs or channels; this is controlled by the equipment sending the signal. If the service being used is the one which setup includes a box with two different outputs for two different (distant) rooms, then scanning channels would help you to find the signal.
VIZIO VXW20L HDTV10A User Manual d. Press either or button to select the Picture Mode option. e. Press either or button to change the Picture Mode option to Standard. f. Press the LAST key to exit the on screen display Menu. Note: If Procedure 4 had been done, you would like to do the following to ensure that the correct program times are shown when pressing the Guide key: Press the Menu key, this will bring up the picture mode menu.
VIZIO VXW20L HDTV10A User Manual 3.2 Watching a TV Program Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. 1. Press the power button on the remote or on the side of the HDTV. The VIZIO logo on the front will change from orange to white. 2. There are 3 options for selecting your programming: a.
VIZIO VXW20L HDTV10A User Manual 3.3 Adjusting Basic HDTV Settings Volume To increase the volume, press and hold the VOL+ or VOL- button on the side of the LCD HDTV or remote control until the desired level is reached. TV Channels To step up or down through the available TV channels, press the CH+ or CH- button on the side of the HDTV or CH !/" on remote control once for the next or previous channel, or hold it depressed until the desired channel is reached.
VIZIO VXW20L HDTV10A User Manual 3.4 Program Information Press the GUIDE button on the remote and program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner. Press the or button to scroll up or down the channels. Each time you pause at a channel, the program list will update with the program schedule for the channel and the window will show the live program for that channel.
VIZIO VXW20L HDTV10A User Manual Chapter 4 Advanced Adjustment of HDTV 4.1 Using the On Screen Display (OSD) The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and other settings. The TV will save changes made to the settings, even if the TV is turned off.
VIZIO VXW20L HDTV10A User Manual 4.2 DTV / TV Input Picture Adjustment 4.2.1 Picture Mode When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to highlight the Picture Mode selection. Use the or button to choose from Custom, Standard, Movie and Game. If Standard, Movie or Game is chosen for the Picture Mode, then the only Picture Adjustments available for you are for the Backlight and Advanced Video; the rest are preset.
VIZIO VXW20L HDTV10A User Manual 4.2.2 Backlight Press the selection. button to highlight the Backlight Press the button to start adjusting the brightness of the Backlight and the menu page will disappear and be replaced by a small Backlight Indicator Bar so you can see the light level between the minimum and maximum available levels. Use the or button to adjust the level.
VIZIO VXW20L HDTV10A User Manual 4.2.4 Contrast Press the button to highlight the Contrast selection. Press the button to start adjusting the contrast and the menu page will disappear and be replaced by a small Contrast Indicator Bar so you can see the contrast level between the minimum and maximum available levels. Use the or button to adjust the level. The Contrast adjusts the white levels in the picture.
VIZIO VXW20L HDTV10A User Manual 4.2.7 Sharpness Press the button to highlight the Sharpness selection. Press the button to start adjusting the sharpness and the menu page will disappear and be replaced by a small Sharpness Indicator Bar so you can see the sharpness level between the minimum and maximum available levels. Use the or button to adjust the level. The Sharpness adjusts the sharpness of the picture.
VIZIO VXW20L HDTV10A User Manual 4.2.9 Advanced Video Press the button to highlight the option for Advanced Video selection. Press the MENU button. A new menu will be displayed showing the advanced functions available for fine tuning of the picture. DNR Press the button to highlight DNR (Dynamic Noise Reduction). Use this feature to diminish picture artifacts caused by the digitizing of image motion content that may be present in the picture.
VIZIO VXW20L HDTV10A User Manual CTI Press the button to highlight CTI (Color Transient Improvement). This feature can be used to reduce the time taken to transition from one color to another. The effect will be seen as sharpening the border between colors. Press the or button to choose from the Off, Low, Medium or Strong setting. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. Flesh Tone Press the button to highlight Flesh Tone.
VIZIO VXW20L HDTV10A User Manual 4.3 DTV / TV Input Audio Adjustment 4.3.1 Volume When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the AUDIO ADJUST page. Press the button to highlight the Volume selection. Press the button to start adjusting the volume and the menu page will disappear and be replaced by a small Volume Indicator Bar so you can see the volume level between the zero and maximum available levels.
VIZIO VXW20L HDTV10A User Manual 4.3.3 Treble Press the button to highlight the Treble selection. Press the button to start adjusting the treble and the menu page will disappear and be replaced by a small Treble Indicator Bar, as before, so you can see the treble level between the zero and maximum available levels. Use the or button to adjust for treble boost or attenuation. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 4.3.
VIZIO VXW20L HDTV10A User Manual 4.3.7 Speakers Press the button to highlight the Speakers selection. Press the button to turn the internal speakers On or Off. You may want to turn-off the internal speakers when listening to the audio through your Home Theatre System. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 4.3.
VIZIO VXW20L HDTV10A User Manual 4.4 DTV / TV Tuner Setup When you first used your VXW20L HDTV10A you will have setup your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP menu. 4.4.1 Tuner Mode When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the TV page. Press the button to highlight the Tuner Mode selection.
VIZIO VXW20L HDTV10A User Manual 4.4.4 MTS This feature allows you, the user to select the different languages in which the signal provider or broadcaster is transmitting the audio with the program you are watching. This signal is in many cases Spanish language. Press the button as many times as it takes to scroll down to this option and get it highlighted. Press either or button to go through the settings of this feature to make your selection.
VIZIO VXW20L HDTV10A User Manual 4.5 DTV / TV Input Setup 4.5.1 Language When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button until the SETUP page is displayed. Press the button to highlight the Language selection. The default is English. Press the button to select Français or Español. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 4.5.
VIZIO VXW20L HDTV10A User Manual 4.5.4 Input Naming This feature has been added to facilitate you, the user in identifying or label the input and signal which is being watched. You could use up to 8 characters; either letters or numbers or combinations of both. Press button to highlight this option. Press button to obtain the next screen which shows the different inputs. Press button to select the desired input which you want to label or name (Examples: VCR, DVD,.., etc.
VIZIO VXW20L HDTV10A User Manual 4.5.5 Closed Captioning (CC) When watching regular analog (NTSC) TV, the Analog CC feature is available in the Setup menu. Press the button to highlight the Analog CC selection. Press the button to select CC1, CC2, CC3 or CC4. Once the adjustments are completed press the LAST button once to return to previous screen or repeatedly to exit the OSD completely. Closed Caption for regular TV is usually CC1 or CC2. 4.5.
VIZIO VXW20L HDTV10A User Manual 4.5.7 Digital Closed Caption Style (Digital CC Style) When watching DTV, the Digital CC Style feature is available in the Setup menu. Press the button to highlight the Digital CC Style selection. Press the button to go to the next screen. Press either or button to toggle between the two options; As Broadcaster and Custom.
VIZIO VXW20L HDTV10A User Manual 4.6 DTV / TV Input Parental Control 4.6.1 Channel Block If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV. When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the PARENTAL page.
VIZIO VXW20L HDTV10A User Manual Press the button to highlight the Channel Block selection. Press the button to turn it on or off. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 4.6.2 TV Rating Follow the procedure in the previous section to display the Parental Control menu. Press the button to highlight the TV Rating selection. Press the button and the Block TV Rating panel will be displayed.
VIZIO VXW20L HDTV10A User Manual 4.6.3 Movie Rating Press the button to highlight the Movie Rating selection. Press the button and the Block Movie Rating panel will be displayed.
VIZIO VXW20L HDTV10A User Manual 4.6.5 Blocked Unrated Programming Follow the procedure in the previous section to display the Parental Control menu. Press the button to highlight the Block Unrated TV option. Press either or button to select YES or NO. If it is set to YES the TV will block programs that do not have a rating. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 4.6.
VIZIO VXW20L HDTV10A User Manual 4.7 HDMI Input Picture Adjustment The Picture Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV or Parental Control adjustments. 4.8 HDMI Input Audio Adjustment The Audio Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.3.
VIZIO VXW20L HDTV10A User Manual 4.10 Video Input Picture Adjustment The Picture Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV adjustments. 4.11 Video Input Audio Adjustment The Audio Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.3.
VIZIO VXW20L HDTV10A User Manual 4.13 Video Input Parental Control The Parental Control menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.6. The menu difference is that there is no icon along the top for DTV / TV adjustments. 4.14 PC Input Picture Adjustment The Picture Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 4.2 for Backlight, Contrast, Brightness and Color Temperature. 4.14.
VIZIO VXW20L HDTV10A User Manual 4.14.2 Backlight Press the button to highlight the Backlight selection. Press the button to start adjusting the brightness of the Backlight and the menu page will disappear and be replaced by a small Backlight Indicator Bar so you can see the light level between the minimum and maximum available levels. Use the or button to adjust the level.
VIZIO VXW20L HDTV10A User Manual 4.14.4 Contrast Press the button to highlight the Contrast selection. Press the button to start adjusting the contrast and the menu page will disappear and be replaced by a small Contrast Indicator Bar so you can see the contrast level between the minimum and maximum available levels. Use the or button to adjust the level. The Contrast adjusts the white levels in the picture.
VIZIO VXW20L HDTV10A User Manual 4.14.6 H-SIZE Press the button to highlight the H-Size selection. Press the button to start adjusting the horizontal size of the picture. Use the or button to adjust the horizontal size. Press the LAST key once to return to the previous screen or repeatedly to return to your program if task has been completed. 4.14.7 H. Position Press the button to highlight the Horizontal Shift selection. Press the button to start adjusting the horizontal position of the picture.
VIZIO VXW20L HDTV10A User Manual 4.15 PC Input Audio Adjustment The Audio Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 4.3. The menu difference is that there are no icons along the top for DTV / TV and Parental Control adjustments. 4.16 PC Input Setup The Setup menu operates in the same way for the PC Input as for the DTV / TV input in section 4.3.8. The menu difference is that there is no icon along the top for TV adjustments and no Closed Caption.
VIZIO VXW20L HDTV10A User Manual 4.17 Understanding Viewing Features Your HDTV features the following viewing modes. You can switch viewing modes using the remote control, please follow the instructions in page 32. 4.17.1 Viewing Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image. Standard TV broadcasts are displayed with a 4:3 Aspect Ratio.
VIZIO VXW20L HDTV10A User Manual Chapter 5 Maintenance and Troubleshooting 5.1 Maintenance Important 1. 2. Make sure that the power cable is removed from the socket before cleaning the TV. Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may damage the housing, screen glass and remote control, and cause paint to peel. Cleaning the Housing and Remote Control 1. 2. Use the VIZIO soft cloth (included) for cleaning.
VIZIO VXW20L HDTV10A User Manual Problem Solution Power is ON but no screen image. Make sure the video cable supplied with the TV is secured to the correct video output port on the back of the VCR and the TV. Make any cable you have attached to the TV is secured to the correct output your Set-Top Box, DVD, etc. Adjust brightness and contrast. Check Source settings. Wrong or abnormal colors appear.
VIZIO VXW20L HDTV10A User Manual Tips for High-Definition Users. The LCD HDTV is an ideal platform for viewing High Definition Content. Best Image Quality will be achieved by the HDMI Input, then YPbPr, then RGB. However, due to variances in broadcast practices, it is possible some image distortions can occur. Tips for Letterbox Content Users. Letterboxed (or “Widescreen”) versions of DVD movies are most commonly formatted for standard 4:3 Televisions.
VIZIO VXW20L HDTV10A User Manual 5.4 Compliance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. USA Canada Germany UK Japan UL CSA VDE BASE/BS Electric Appliance Control Act 5.5 FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
VIZIO VXW20L HDTV10A User Manual Chapter 6 Miscellaneous Information 6.1 Specifications Specifications Panel 20” Diagonal, 16:9 Aspect Ratio Resolution 1366 x 768 pixels Pixel (Dot) Pitch 0.32475mm (H) x 0.32475mm (V) Display Compatibility HDTV (720P) Signal Compatibility 480i (SDTV), 480P (EDTV), 720P (HDTV), 1080i (HDTV) Colors 16.
VIZIO VXW20L HDTV10A User Manual Certifications CSA C/US, FCC Class B *Product specifications may change without notice or obligation. 6.2 Glossary – Standard Definitions Analog TV: Today’s TV system using radio frequency waves to transmit and display pictures and sound. Aspect Ratio (4x3): Traditional TV “aspect ratio”, that is, the screen’s width as compared to its height. For example, a “32 inch TV screen” would be 25 inches wide and 19 inches tall.
VIZIO VXW20L HDTV10A User Manual 6.
VIZIO VXW20L HDTV10A User Manual Password change, 53 TV Rating, 51 PC Input Audio Adjustment, 60 Picture Adjustment, 56 Setup, 60 PC Picture Adjust Auto Adjust, 56 Fine Tune, 59 Horizontal Position, 59 Horizontal Size, 59 Vertical Position, 59 PC Resolutions, 25 R Remote Batteries, 12 Layout, 11, 12 Range, 12 RGB Connecting your PC, 25 S Screen Size explanation, 61 S-Video Connecting your DVD Player, 22 Connecting your VCR, 23 Connecting your Video Camera, 23 T Technical Specifications, 66 Troubleshootin