User guide

VIZIO L32 User Guide
Version - 4/14/2005 35
www.vizioce.com
3.6.2 - Searching for Component Codes
If the user cannot find the manufacturer in the component list or the program code does not work,
the user can use the remote control to search for the correct component code.
To search for a component code:
1. Turn on the component.
2. Press the matching camponent button on the remote control.
3. Press and hold the SETUP button until the LED flashes twice.
4. Press 9 9 1. The LED flashes twice.
5. Point the remote control at the camponent and then alternate between pressing the POWER
button and the component button on the remote control until the component turns off.
If the component still does not respond, clear the component button, then repeat the search
procedure.
To clear the component button:
1. Make sure that the component is turned on.
2. Press and hold the SETUP button on the remote control until the LED flashes twice.
3. Press 9 9 2, then press the component button on the remote control twice.
3.6.3 - Reassigning Component Buttons
You can reassign the component buttons on the remote control if you have more than one of the
same types of component. For example, if you are using the remote to control the cable (CBL),
CD, DVD, TV and two VCRs, you can reassign the AV2 button as a second VCR button.
To reassign component buttons:
1. Press and hold the SETUP button until the LED flashes twice.
2. Press 9 9 2. The LED flashes twice.
3. Press the component button that you want (VCR) once, and then press the component button
that you are reassigning (AV2) once. The AV2 button is now reassigned and can be
programmed as a VCR component button. See “Programming the VIZIO Universal Remote
Control”, page 33.
3.6.4 - Changing Volume Lock
The remote control is set to control volume throHugh your TV while in cable (CBL), DVD, satellite
(SAT) and VCR camponent modes. Use the volume lock if you want to control the volume for all
camponents through a specific component. For example, you want to control volume for all
camponents through the tuner (TNR).
To change the volume lock:
1. Press and hold the SETUP button until the LED flashes twice.
2. Press 9 9 3. The LED flashes twice.
3. Press the component button that you want (TNR) once. The LED flashes twice. Volume will
now be controlled through the tuner for all camponents.
3.7.5 – Using a Cable Box or Satellite Box Remote
Your VIZIO remote uses code 0178 and 1758 to work with your L32. To use a cable or satellite remote
to work with your L32, refer to your cable or satellite remote users guide for information on how to program
their remote. If your cable or satellite remote uses a 4 digit remote code program in 0178. If your cable or
satellite remote is a 5 digit remote (like most Direct TV units) use code 10178. If your cable or satellite remote
uses a 3 digit code (for example, Echostar and Dish Network), then use code 627.
Note: Some functions on your cable or satellite remote may not function like expected. Typically
power, volume and mute will work.