M-Series™ Quantum User Manual Models: M50Q7-H1, M50Q7-H61, M55Q7-H1 & M65Q7-H1
Table of Contents Getting to Know Your TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Adjusting the Power Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Using the USB Power Feature. . . . . . . . . . . . . . . . . . . . . . . .
Safety & Certification THANK YOU FOR CHOOSING VIZIO IMPORTANT SAFETY INSTRUCTIONS • And congratulations on your new VIZIO TV! Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock. electric shock. When your TV will not be used for an extended period of time, unplug the power cord. • The American Academy of Pediatrics discourages television viewing for children younger than two years of age. • The wall socket should be installed near your TV and easily accessible. • To reduce risk of electric shock, do not touch the connector with wet hands.
TELEVISION ANTENNA CONNECTION PROTECTION The TV shall be installed in accordance with the applicable provisions of Article 810 and Article 820. If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 19922019 Dolby Laboratories. All rights reserved. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. For DTS patents, see http://patents.dts.com. For DTS patents, see http://patents.dts.com.
Getting to Know Your TV 1 FRONT PANEL Remote Sensor and Power Indicator When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on, see Turning the Power Indicator On or Off on page 23.
1 REAR PANEL Power Press to turn on the TV. Press and hold to turn the TV off. Volume Press to increase or decrease the TV volume level. Input Press to access the input menu. VOL INPUT Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.
To 3 m Standard RCA 1 Optical Connecting a device — AUDIO & VIDEO CABLE TYPES HDMI CABLE COAXIAL CABLE Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Composite, etc.). 2. Connect the appropriate cable (not included) to the TV and the device. 3. Turn the TV and your device on. 4. Set the TV’s input to match the connection you used (HDMI-1, HDMI-2, etc.).
1 WALL-MOUNTING THE TV First you will need a wall mount. Consult the provided table below to find the appropriate mount for your TV. Be sure the mount you choose is capable of supporting the weight of the TV. To install your TV on a wall: 1. Disconnect any cables connected to your TV. 2. Place the TV face-down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV. 3. If attached, remove the stands by loosening and removing the screws. 4.
1 Replacing the Batteries USING THE REMOTE INPUT App Launcher Quickly launch the pictured app Menu Display the settings menu MENU Push the bottom of the battery compartment and lift battery cover to open. Power Turn television on or off 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. Info Display the info window 3. Replace the battery cover and click to close.
Home Use Completing the First-Time Setup Home Use Store Demo Family Room Store Demo Family Room Master Living Room Bedroom Living Room number we assign. You may change your Viewing Data settings at any time within the Settings Menu of your TV. Declining Viewing Data collection will not change the functionality of your device. Bedroom Game Room Game RoomMaster WHO DO WE SHARE VIEWING DATA WITH? When enabled, we share Viewing Data with authorized data partners.
Using the On-Screen Menu 3 Your TV features an easy-to-use on-screen menu. NAVIGATING THE ON-SCREEN MENU CHANGING THE INPUT SOURCE To open the on-screen menu, press the MENU button on the remote. To open the on-screen menu: From this menu, you can: 1. Press the MENU button on the remote. External devices, such as DVD players, Blu-ray players, and video game consoles, can be connected to your TV. To use one of these devices with your TV, you must first change the input source using the input menu.
3 ADJUSTING THE PICTURE SETTINGS 2. Your TV can be adjusted to suit your preferences and viewing conditions. • To adjust the picture mode settings: Menu > Picture > Picture Mode 1. Use the Navigation buttons on the remote to highlight Picture Mode, then use the Left/Right Navigation buttons to change the picture mode: • Vivid — Sets the picture settings to values that produce a brighter, more vivid picture. • Bright — Sets the picture settings to values ideal for watching TV in a brightly-lit room.
3 Changing the Picture Aspect Ratio Adjusting Advanced Picture Settings To change the screen aspect ratio: To adjust advanced picture settings: Menu > Picture > Picture Aspect Menu > Picture > Advanced Picture • Use the Navigation buttons to highlight the aspect ratio you wish to view. Your TV can display images in different modes: • Normal (default) — No change to aspect ratio. • Panoramic* — Stretches a 4:3 image to fill 16:9 screen with an algorithm so the center doesn’t look stretched.
3 Adjusting the Color Tuner Settings The Color Tuner settings allow you to adjust the color management system, 20 point white balance, turn color channels off for testing, and display SMPTE, flat, ramp, and uniformity analyzer test patterns. To access the color tuner table: To adjust the color management system/20 point white balance settings: 1. Use the Navigation buttons on the remote to highlight the Hue, Saturation, Brightness, Offset, or Gain of the color you wish to adjust. Press the OK button. 2.
3 To show or hide the Flat Test Pattern: To show or hide the Ramp Test Pattern: To show or hide the Uniformity Analyzer Test Pattern: Menu > Picture > Advanced Picture > Color Calibration > Color Tuner > Flat Test Pattern Menu > Picture > Advanced Picture > Color Calibration > Color Tuner > Ramp Test Pattern Menu > Picture > Advanced Picture > Color Calibration > Color Tuner > Uniformity Analyzer Test Pattern Uniformity Analyzer Test Pattern Ramp Test Pattern Flat Test Pattern Off Off Off 1.
3 Adjusting Picture Input Settings Adjusting the Picture Mode Edit Settings Saving a Custom Picture Mode Enable HDMI Mode, Full Color 4:4:4, Filmmaker Mode and adjust picture size and position. Manage custom picture modes and reset preset picture modes. Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources.
3 Copy a Picture Mode Lock a Picture Mode Deleting a Picture Mode Custom picture mode settings can be copied to be applied to other inputs. Custom picture modes can be locked/unlocked with a unique PIN to prevent accidental changes to their settings. If not previously set, you can set up your system PIN code here. Custom picture modes that are no longer needed can be deleted. 1. • Select Save Picture Mode to save picture mode for all inputs. 2.
3 ADJUSTING THE AUDIO SETTINGS To adjust the audio settings: Menu > Audio Use the Navigation buttons to highlight the setting you wish to adjust, then press Left/Right Navigation buttons to change the setting: • TV Speakers — Built-in speakers automaticcaly turn off if a sound bar is discovered. Turn the built-in speakers On or Off. TV Speakers • Dialogue Enhancer — If enabled and the signal source includes Dolby 5.1 AC-4 audio then clarity of dialogue is enhanced.
3 ADJUSTING THE NETWORK SETTINGS Changing the Manual Setup Settings Connecting to a Hidden Network Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed wireless internet. Advanced users can fine-tune the network settings using the Manual Setup feature. The security settings on your router may require you to enter the TV's MAC address.
3 SETTING UP TV CHANNELS You can use the TV’s Channels menu to: • Find channels • Find new channels • Select channels to skip • Select analog audio mode • Select the language for digital audio • Set parental controls TV Channels Find Channels Find New Channels Scanning for TV Channels Skipping Channels The TV may need to scan for channels before it can display programs and their associated information.
3 Changing the Analog Audio Language To use the Digital Language feature: Some analog over-the-air (free) and cable channels broadcast programs in more than one language. The TV’s Analog Audio feature allows you to listen to audio in an alternate language using Secondary Audio Programming (SAP). Menu > TV Channels > Digital Audio Select the preferred audio language. Available languages or video description depend on the broadcast content.
3 Using Parental Controls Enabling or Disabling Program Ratings Blocking and Unblocking Content by Rating The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs unless a PIN is used. To manage program content according to its rating, you must first enable the Program Rating feature. To enable or disable the Program Rating feature: A channel may sometimes broadcast programs that are meant for a variety of audiences (some for children and some for adults).
3 INPUT ACCESSIBILITY SETTINGS Setting Up Closed Captioning Changing the Appearance of Digital Closed Captions VIZIO is committed to providing intuitive, user-friendly products. Your new VIZIO TV offers several accessibility features that can help you with easy navigation. Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. Digital closed captions can be displayed according to your preference.
3 2. Use the Up/Down Navigation buttons on the remote to highlight the setting you wish to change, then use the Left/Right Navigation buttons to change the settings (choose "As Broadcast" to keep default setting): • Text Style — Change the font used for the closed captioning text. • Text Size — Make the text larger or smaller. • Text Color — Change the color of the text. • Text Opacity — Change the transparency of the text.
3 CHANGING THE SYSTEM SETTINGS Using the System menu, you can: • Change the on-screen menu language • Set the time zone and local settings • Name the TV • Name an input • Hide inputs not in use Menu Language English TV Name • Set the USB power mode • Turn the power indicator on or off • Set up timers • Set a system PIN code • Adjust CEC settings • Manage paired devices • Manage a voice remote control Your TV can display the on-screen menu in different languages.
3 Changing the TV Name Renaming Devices on the Input Menu Adjusting the Power Mode Naming your TV helps differentiate it from other cast devices you may have in your home. You can rename the inputs to make them easier to recognize on the Input menu. For example, if you have a DVD player connected to the HDMI-1 input, you can rename that input to display “DVD Player.” Your TV is set to Eco Mode by default. When the TV is powered off, the Eco Mode setting uses less than 0.5W of power.
3 Using the USB Power Feature The USB port can be used to charge devices. The two options for this feature are: • Always On — Power is always available. • Off When TV Off — Power is only available with the TV is on. USB Power Always On Off When TV Off Turning the Power Indicator On or Off Setting the Auto Power Off Feature The power indicator on the front of your TV normally does not glow when the TV is on. You can change this setting if you prefer the light to be on.
3 Setting a System PIN Code Adjusting the CEC Settings Managing Mobile Devices You can set a system pin to lock content and picture modes, as well as prevent accidental system resets. The first time you select System PIN code, you will need to create a PIN. The CEC function on your TV enables you to control devices connected to an HDMI input with the VIZIO TV remote, without any programming Your TV can be paired with a mobile device so you can easily control your TV across multiple devices.
3 USING THE ADMIN & PRIVACY MENU Viewing System Information Performing a Soft Power Cycle You can use the TV’s Admin & Privacy menu to restore the TV to its factory default settings as well as access other administrative settings. To view technical data and status information about your TV and network connection: A soft power cycle forces the TV to turn off then on again.
3 Viewing Data To turn viewing data on or off: Menu > Admin & Privacy > Viewing Data Use the Left/Right Navigation buttons to toggle from on or off About Viewing Data WHAT DATA DOES ACR TECHNOLOGY COLLECT? When enabled, ACR technology will collect information about the audio and video programing content playing on this internet-connected display unit including broadcast television, advertisements and other commercially available content.
3 USING THE INFO WINDOW Press the INFO button to display: • TV name • Current input or for tuner: current channel • Picture aspect • Audio type • Network name • Time TV Name Current input or for tuner: current channel Living Room * When TV speakers are off and Dolby Atmos content is passed through the TV to a sound bar or other audio device, the Dolby Atmos icon will display with "Audio Out.
SmartCast Home™ 4 INPUT What is SmartCast Home? MENU INFO SmartCast Home lets you discover, stream, and control your content like never before! Access top apps, like Netflix, Hulu, and Amazon Prime Video, by using the remote to easily browse and launch content directly from the home screen. SmartCast Home makes finding something to watch easy and fun.
WatchFree™ 4 INPUT What is WatchFree? What you can do with WatchFree How to Launch WatchFree VIZIO WatchFree takes your cord-cutting entertainment experience one step further! With the simple press of a button, enjoy free streaming TV with over 100 live TV channels to choose from – news, movies, sports, comedy, music and more. A built-in on-screen guide makes finding something to watch easier than ever. • Stream over 100 live TV channels absolutely free – news, movies, sports, comedy, music and more.
Playing USB Media The USB Media Player allows you to connect a USB flash drive to your TV and play music, video, or photos. 4 Preparing Your USB Drive to Play USB Media Removing the USB Drive from the TV To display USB media, you must first save your videos onto a USB flash drive: To safely remove your USB flash drive from the TV: • The USB flash drive must be formatted as FAT32. 1. Turn the TV off. • Files on the USB flash drive must end in a supported file extension ( .mp3, .jpg, etc). 2.
Playing USB Media: Music 4 Back Button Highlight this button and press OK to return to the previous screen. Connected Sources Displays connected USB devices. Music USB1: MyFlashDrive Current Folder Now Playing Information Displays song title, album title, and other information.
Playing USB Media: Video 4 Back Button Highlight this button and press OK to return to the previous screen. Connected Sources Displays connected USB devices. Video USB1: MyFlashDrive MyFlashDrive\Video\root\My Videos Current Folder My Videos # File 1 Family Vacation - California 2 28th Birthday Party 3 4 Date - Duration 00:38:18 Korea 2019 - Sunny’s Graduation - 00:25:32 00:23:43 00:41:08 Folder Contents/Playlist This area displays the contents of the currently selected folder.
Playing USB Media: Photo 4 Back Button Highlight this button and press OK to return to the previous screen. Back Button Highlight and press OK to return to left column. Current Folder Displays the folder path. Connected Sources Displays connected USB devices. Photo VIZIO_2GB\Photo\root USB1: MyFlashDrive Folder Contents/Playlist This area displays the contents of the currently selected folder. You can browse among files using the Arrow and OK buttons on the remote.
Product Registration and Technical Support A Take a moment to register your product at VIZIO.COM/PRODUCT-REGISTRATION Customized Support News and Offers Updates and Enhancements Get efficient, accurate assistance from the VIZIO Support team. Stay up-to-date with product news and take advantage of exclusive offers. Be first to know about important product updates. and alerts. Do you have questions? Find answers at SUPPORT.VIZIO.
Help Topics The remote is not responding. • Make sure the batteries are properly inserted matching the - and + symbols. • Replace the batteries with fresh ones. The TV displays “No Signal.” • Press INPUT button on the remote control to select a different input source. • If you are using cable TV or antenna connected directly to the TV, scan for channels. See Scanning for TV Channels on page 16. There is no power. • Ensure the TV is plugged into a working electrical outlet.
Help Topics A I see “noise” or static on the screen. How do I connect to my Wi-Fi network? • • On your TV remote, press the MENU button then go to Network > Select your Wi-Fi name > Enter password. • Open the VIZIO SmartCast Mobile™ app on your phone or tablet. Tap on the Menu Tab > SmartCast Devices > Your TV/Device Name > Network • Tap on the Settings icon > Network > Wireless Access Points. Select your Wi-Fi network from the list, enter the Wi-Fi password, and tap Connect.
Specifications B M50Q7-H1 M50Q7-H61 M55Q7-H1 M65Q7-H1 50" 50" 55" 65" 49.5” 49.5” 54.5” 64.5" Dimensions w/ Stand 44.08” x 27.98” x 10.04” (1119.52 x 710.72 x 255 mm) 44.08” x 27.98” x 10.04” (1119.52 x 710.72 x 255 mm) 48.59" x 30.60" x 10.04" (1234.2 x 777.2 x 255 mm) 57.28 x 35.65 x 11.81" (1455 x 905.5 x 300 mm) Dimensions w/o Stand 44.08” x 25.58” x 2.84” (1119.52 x 649.72 x 72.25 mm) 44.08” x 25.58” x 2.84” (1119.52 x 649.72 x 72.25 mm) 48.59 in x 28.28 in x 2.85" (1234.
Regulatory Information FCC Class B Radio Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Limited Warranty UNITED STATES AND CANADA BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT.
D United States). The arbitrator will have no authority to award punitive or other damages not measured by the prevailing party’s actual damages, except as may be required by statute. The arbitrator will not award consequential damages, and any award will be limited to monetary damages and will include no equitable relief, injunction, or direction to any party other than the direction to pay a monetary amount.
Legal Information Software Licenses All software is provided subject to a software license agreement(s) and you agree that you will be bound by such license agreement(s) in addition to these terms. Your use of this product is subject to VIZIO’s privacy policy, which may be updated from time to time, and is available to view at vizio.com/privacy.
