NETWORK CARD User Manual

ManualsBrandsVizio ManualsNetwork CardNX-100

OPERATIONS MANUAL

NETWORK AUDIO ADAPTER NX-100

1. OPERATION SCREEN .............................. 2

2. MENU ......................................................... 3

3. MAKING BROADCASTS .......................... 4

4. ERROR MESSAGES (EXAMPLES) .......... 6

Please follow the instructions in this manual to obtain the optimum results from this unit.

We also recommend that you keep this manual handy for future reference.

TABLE OF CONTENTS

Summary of content (6 pages)

PAGE 1
OPERATIONS MANUAL NETWORK AUDIO ADAPTER NX-100 Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference. TABLE OF CONTENTS 1. OPERATION SCREEN .............................. 2 2. MENU ......................................................... 3 3. MAKING BROADCASTS .......................... 4 4. ERROR MESSAGES (EXAMPLES) ..........
PAGE 2
1. OPERATION SCREEN (Operation screen example) (2) (1) (5) (3) (4) (1) Selection Button Selects broadcast locations. (2) Group Button Simultaneously selects two or more Selection buttons. (3) Start Button Starts the broadcast selected with the Selection or Group button. (4) End Button Quits broadcasts. (5) Message Display Area Displays responses to operations or error contents.
PAGE 3
2. MENU 2.1. File Exit: Exits the software program in use. 2.2. Setting Button setting: Not used during operation. (Used for settings only. Entry of both system name and password are required to perform the settings.) Unit settings: Not used during operation. (Used for settings only. Entry of both system name and password are required to perform the settings.) 2.3. Help Help: Displays help contents. Version data: Indicates the version number of the software program in use.
PAGE 4
3. MAKING BROADCASTS Step 1. Start the NX-100 Operation Program by double-clicking on the operation program's desktop shortcut or the "nx100_control.jar" application created in the program's installed folder. The operation screen is displayed. (Operation screen example) Step 2. Press either the Selection or Group button to select broadcast locations. Multiple locations can be simultaneously selected. Selected buttons are highlighted in white.
PAGE 5
Step 3. Press the Start button. Connection to the pressed Selection button's programmed NX-100 units begins. If all NX-100 units are connected, the indication "Connection succeed to all designated units.*" is displayed in the message display area, and the corresponding Selection button changes color to orange. * When only a portion of the programmed units is connected, the indication "Connection failure to some designed units." is displayed.
PAGE 6
4. ERROR MESSAGES (EXAMPLES) Message Points to Check • "OO" connection failure. - Maximum number of connectable PCs exceeded. • No start. - Designated unit busy. • "OO" contact output "XX" already ON. • "OO" contact output "XX" turned OFF by other contact or PC. Quit operations, and then restart after a few minutes. • • • • • • • • • Contact system personnel. "OO" connection failure. Connection failure to all designated units. "OO" connection failure - Incomplete broadcast. No broadcast.