VIZIO QUICK START GUIDE Model: S3820w-C0
IMPORTANT SAFETY INSTRUCTIONS Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference. • Do not overload power strips and extension cords.
PACKAGE CONTENTS High Definition Sound Bar Power Cable Stereo RCA to 3.
CONTROLS & CONNECTIONS Back of Sound Bar L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W AUX (1) Analog Audio In (Stereo RCA) SERVICE SUB OUT USB (6) L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W Power Port *Supports .WAV file format playback only SERVICE Service Port For use by service technicians only. SUB OUT USB (6) USB* (6) USB In DIGITAL (3) Coaxial In OPTICAL (4) Digital Optical Audio In AUX (2) Analog Audio In (Stereo 3.
L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W Back of Sound Bar SERVICE SUB OUT USB (6) Control Buttons are located here: Power Press to turn soundbar on or off. Input Press to change the audio source. Bluetooth Input Hold to pair. (See ‘Bluetooth Pairing’ for more information.) + - Volume Increase or decrease the loudness of the audio.
FIRST-TIME SETUP Back of Sound Bar 1 L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W GOOD 3.5MM TO RCA CABLE SERVICE SUB OUT USB (6) BETTER BETTER DIGITAL COAXIAL CABLE** DIGITAL OPTICAL CABLE** GOOD 3.5MM TO RCA CABLE CHOOSE ONE CABLE: BETTER GOOD AND CONNECT IT TO YOUR TV *Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc.) see your device’s user manual.
L 2 DIGITAL (3) AUX (1) Connect the Power Cable to the Sound Bar. R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W SERVICE SUB OUT USB (6) L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W SERVICE SUB OUT USB (6) 3 Plug the Power Cable into a power outlet.
4 Sound Bar is centered below the TV. For the best surround sound experience, position the Sound Bar as shown. The Sound Bar should be close to ear level.
5 Top 6 Top Remove the battery cover by gently sliding it away from the remote. 7 Turn your TV on, then press the Power button on the remote to turn the Sound Bar on. Press the Input button to switch between audio sources. For example, if you connected your TV to Input 1, set the Sound Bar to Input 1. Hardware setup is complete. Insert the included batteries and gently slide the battery cover back into place.
USING THE REMOTE Input Press to change input source. Volume + Press to increase volume. Previous Press to return to previous track. (Changes Treble and Bass levels) Bluetooth Press to enter Bluetooth input. (To enter force pair mode, press and hold for 5 seconds) Power Press to turn on or off. Enter/Play/Pause Press to select an option. Press to play or pause. Next Press to skip to the next track. (Changes Treble and Bass levels) TruVolume Press to enable/disable TruVolume.
LED INDICATORS LED Indicators are located here: The LED Indicators will behave differently with each button on the remote control. Function LED Behavior Analog Audio In - AUX (1) Input • Analog Audio In - AUX Stereo RCA (1) Coaxial In - Digital (3) • Analog Audio In - AUX Stereo 3.
BLUETOOTH PAIRING To pair the Sound Bar with a Bluetooth device: 1. Press and hold the Bluetooth button on the Sound Bar or the Bluetooth button on the remote for five (5) seconds. When the Sound Bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will light sequentially from left to right and back again. Once the device is paired, the LED Indicators will stop flashing. 2. You can now search for the Sound Bar (VIZIO S3820w) using your Bluetooth device.
USING BLUETOOTH MODE Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your device’s documentation for more information. Once you have paired your source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain paired, even if you change the input on the Sound Bar.
ADVANCED SETUP Connect up to four (4) different devices to the Sound Bar (devices shown are examples; you can use any device). To listen to a device, change the input source on the Sound Bar. Optical, Coaxial, and 3.5mm cables transmit audio only. Connecting a video device requires a separate video connection from the device to your TV. RCA AUDIO CABLE L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W DIGITAL COAXIAL CABLE Game Console *Supports .
CONNECTING A SUBWOOFER Back of Sound Bar L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W SERVICE SUB OUT USB (6) Optional Subwoofer* To connect a subwoofer: 1. Press the BASS button on the remote control to enter bass adjustment mode. 2. Use the Previous/Next buttons to adjust the bass level to the center position. 3. Power Off the Sound Bar and Subwoofer. Connect an RCA cable from the Sound Bar to the Subwoofer. 4. Power On the Sound Bar and Subwoofer. 5.
WALL MOUNTING THE SOUND BAR 1 Wall-Mount Screw Holes Back of Sound Bar L DIGITAL (3) AUX (1) R OPTICAL (4) AUX (2) AC IN 120V~ ∕ 60Hz 60W SERVICE SUB OUT USB (6) Insert the two wall-mount screws into the wall-mount screw holes, and then tighten them with a Phillips screwdriver. 2 Place the included wall mounting template against the wall under your TV. Mark the four bracket holes using a pencil.
3 Be sure your screws are attached to wood studs, drywall anchors (for drywall), or concrete anchors (for brick/concrete walls). Screws for attaching the brackets to the wall are not included. Choose the screw type and length appropriate to your home’s construction. If in doubt, consult a professional installer. 22.5 in (571.5 mm) Wall Mount Screw Screw Size: M4 x 10 If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer.
USING BUTTON COMBINATIONS There are 3 functions that are triggered by 3 different button combinations on the Sound Bar. Function LED Behavior Description Factory Reset All 12 LEDs will flash 3 times: Reset the Sound Bar to the factory default settings. To perform a Factory Reset, Press and Hold the Bluetooth( ) and Volume Down (—) buttons for 5 seconds. Note: This will erase all settings and preferences that you have set.
HELP & TROUBLESHOOTING There is no power. • Press the POWER button on the remote control or on the top of your Sound Bar. • Ensure the power cord is securely connected. • Plug a different device into the electrical outlet to verify that the outlet is working correctly. There is no sound. • Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar. • Press MUTE on the remote to ensure the Sound Bar is not muted.
DO YOU HAVE QUESTIONS? LET US HELP! YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT The VIZIO support team is highly trained and is based in the United States. We can help with: • New Product Setup • Connecting Your Devices • Technical Problems • And More Phone: (877) 878-4946 (TOLL-FREE) Email: techsupport@VIZIO.com Web: http://store.VIZIO.
VIZIO RECOMMENDS M-Series Razor LED Smart TV TM The all-new VIZIO M-Series Razor LED™ Smart TV with Theater 3D® has arrived. With an ultra-modern design, brilliant Razor LED™ picture quality, and the new, faster VIZIO Internet Apps Plus™ Smart TV experience, it’s the must-have entertainment upgrade you’ve been waiting for. Available at VIZIO.
ONE-YEAR LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
© 2014 VIZIO INC. ALL RIGHTS RESERVED.
