User's Manual
Table Of Contents
- USER MANUAL Model: SB2021n-H6
- IMPORTANT SAFETY INSTRUCTIONS
- TABLE OF CONTENTS
- PACKAGE CONTENTS
- CONTROLS & CONNECTIONS
- FIRST-TIME SETUP
- USING THE REMOTE
- LED INDICATOR
- PROGRAMMING THE SOUND BAR
- USING BUTTON COMBINATIONS
- BLUETOOTH PAIRING
- USING BLUETOOTH MODE
- ADVANCED SETUP
- Reconnecting the Subwoofer
- HELP & TROUBLESHOOTING
- LIMITED WARRANTY
- United States and Canada
- How Long This Warranty Lasts
- What This Warranty Covers
- Zero Bright Pixel Defect Guarantee (Displays Only)
- How to Get Service
- Your Obligations Before Service
- VIZIO’s Responsibilities
- Types of Service
- What This Warranty Does Not Cover
- What to Do If You Are Not Satisfied With Service
- Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)
- Exceptions to Binding Arbitration Agreement and Class Action Waiver
- Exclusions and Limitations
- How the Law Applies
- General
- Changes to Warranty
- Specifications
- LEGAL & COMPLIANCE
English - 12
Remove the battery cover by gently
sliding it away from the remote.
Insert the included batteries and gently
slide the battery cover back into place.
8
6 7
Turn on your TV and sound bar. The sound bar will announce
"Searching" and automatically begin searching for an active input.*
The LED indicator on the front of the sound bar will begin cycling
through inputs until an audio source is detected. Once an active
input has been found, the input name will be announced.**
You can press the INPUT button to switch between audio sources.
For example, if you connected your TV to AUX , set the sound bar
to AUX .
Tip: Pressing the INPUT button will stop
the auto detect function.
*Occurs only during rst-time set up.
**Auto detect function only occurs once when the sound bar is rst powered on. To enable this feature again, you
must do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the
INPUT button for 3 seconds.
When needed, VIZIO recommends replacing the batteries that came
with this remote with two, new Duracell ‘AAA’ alkaline batteries.
Input
Power
Top
Top