User's Manual

English - 18
USING BUTTON COMBINATIONS
There are functions that are triggered by dierent button combinations on the sound bar.
Function LED Behavior Description
Factory
Reset
LED will ash 3 times.
Reset the sound bar to the factory default settings. To perform a Factory
Reset,
Press and Hold the Bluetooth( ) and Volume Down (—) buttons for
5 seconds.
Note: This will erase all settings and preferences that you have set.
VIZIO TV
Remote
Control
A high tone double beep indicates
On, while a low tone double beep
indicates O.
Enable/disable the use of a VIZIO TV remote control to power on and
adjust the volume of the sound bar. To enable/disable this function,
Press and Hold the Power ( ) and Volume Up ( + ) buttons for 5 seconds.
Note: This function is enabled by default.
Eco Power
Mode
A high tone double beep indicates
On, while a low tone double beep
indicates O.
When the Eco Power setting is enabled, the sound bar will automatically
power down after a period of inactivity. When disabled, the sound bar
will remain powered on until you turn it o. To enable/disable this
function, Press and Hold the Power
( ) and Volume Down (—) buttons
for 5 seconds.
Note: Eco Power Mode setting is enabled by default.
Speaker
Test
—
Press and Hold the Bluetooth( ) and Volume Up (+) buttons for 5 seconds.
A voice will begin calling out each speaker beginning with left front.
(Left Front, Right Front, and subwoofer-white noise). If any of these are
missing, check the connection and run the speaker test function again.
Buttons are located here.