User Guide

English - 11
When needed, VIZIO recommends replacing the
batteries that came with this remote with two, new
Duracell ‘AAA’ alkaline batteries.
4
Remove the battery cover by gently
sliding it away from the remote.
5
Insert the included batteries and gently
slide the battery cover back into place.
6
Turn on your TV and sound bar. The sound bar will
automatically begin searching for an active input.*
The LED indicators on the front of the Sound Bar will begin
cycling in pairs through inputs until an audio source is
detected.*
You can press the INPUT button to switch between audio
sources. For example, if you connected your TV to AUX, set
the Sound Bar to AUX.
Power
Input
Top
Top
Tip: Pressing the INPUT button will
stop the auto detect function.
* Auto detect function only occurs once when the Sound Bar is rst powered on. To enable this feature again, you must do a Factory Reset (see
the Using Button Combinations section for more information) or press and hold the INPUT button for 3 seconds.