User Guide
English - 13
LED INDICATORS
LED Indicators are located here.
Function LED Behavior Description
Input
Press the INPUT button on the remote to cycle through the available
inputs:
• Analog Audio In - AUX Stereo 3.5mm
• Digital Optical Audio In - Optical
• Bluetooth
• USB In - USB
Bluetooth
Pairing
Press and hold the button on the remote. The Sound Bar will be
discoverable for 15 minutes. You can now search for the Sound
Bar (VIZIO SB2820n) using your Bluetooth Device. The sound bar
will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the
Sound Bar.
DTS
TruVolume
On/O
Press the TVOL button to enable/disable TruVolume.
When enabled (On), TruVolume provides a consistent and
comfortable volume level for a more enjoyable listening
experience.
(When searching for device)
Flash from the bottom to
top and back continuously.
TruVolume On
TruVolume O
Digital Optical Audio In
Optical
Analog Audio In - AUX
The LED Indicators will behave dierently with each button on the
remote control.
USB In - USB
Bluetooth