VIZIO SV320XVT & SV370XVT User Manual Dear VIZIO Customer, Congratulations on your new VIZIO SV320XVT & SV370XVT television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO HDTV High Definition Television. For assistance, please call (877) 668-8462 or e-mail us at www.vizio.com.
VIZIO SV320XVT & SV370XVT User Manual Important Safety Instructions Your HDTV is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your HDTV from being damaged, the following rules should be observed for the installation, use, and maintenance of your HDTV. Read the following safety instructions before operating your HDTV. Keep these instructions in a safe place for future reference.
VIZIO SV320XVT & SV370XVT User Manual ! ! ! ! ! ! ! ! ! ! ! ! ! ! The wall socket should be installed near your HDTV and easily accessible. Only power of the marked voltage can be used for your HDTV. Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms. Unplug your HDTV during a lightning storm or when it will not be used for long period of time.
VIZIO SV320XVT & SV370XVT User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
VIZIO SV320XVT & SV370XVT User Manual Advisory of the DTV Transition The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local television stations may switch sooner. After the switch, analog-only television sets that receive TV programming through an antenna will need a converter box to continue to receive over-the-air TV. Watch your local stations to find out when they will turn off their analog signal and switch to digital-only broadcasting.
VIZIO SV320XVT & SV370XVT User Manual Table of Contents Important Safety Instructions..................................................................................................................... 2 Television Antenna Connection Protection ............................................................................................... 4 Advisory of the DTV Transition..................................................................................................................
VIZIO SV320XVT & SV370XVT User Manual Thumbnail Size .................................................................................................................................... 31 Info ....................................................................................................................................................... 31 Music Settings .........................................................................................................................................
VIZIO SV320XVT & SV370XVT User Manual Channel Info......................................................................................................................................... 44 Setup Menu ............................................................................................................................................. 45 Language ............................................................................................................................................. 45 PIP .......
VIZIO SV320XVT & SV370XVT User Manual Opening the Package Your HDTV and its accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Once you have opened the carton, check that your HDTV is in good condition and that all of the contents are included. The screen can easily be scratched or broken, so handle your HDTV gently and never place your HDTV with the screen facing downwards on a surface without protective padding.
VIZIO SV320XVT & SV370XVT User Manual TV Setup and Stand Assembly To unpack the TV and stand base: 1. Remove the remote control, batteries, and power cord from the foam end caps. 2. Remove the top foam end caps. 3. Remove the stand base and the thumb screw. 4. Remove the TV from the box and lay it face down on a clean, flat surface. Note: Make sure that the surface is free of debris to prevent the TV screen from getting scratched. To attach the TV stand base: 1.
VIZIO SV320XVT & SV370XVT User Manual Setting Up Your HDTV ! ! ! ! ! ! ! Read this user manual carefully before installing your HDTV. The power consumption of your HDTV is about 98W (AVG) for the SV320XVT; 125W (AVG) for the SV370XVT. Use the included power cord. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be compromised. Your HDTV should be installed on a flat surface to avoid tipping.
VIZIO SV320XVT & SV370XVT User Manual Chapter 1 Basic Controls and Connections Front Panel POWER ‘VIZIO’ LIGHT– The VIZIO name lights white when powered on and orange when powered off. REMOTE CONTROL SENSOR – Point the remote control directly at this window for the best response to the remote signal. Side Panel Controls Right side POWER/Jog Wheel ( ) – Switch the HDTV on by pressing the button once. Press the button again to turn the HDTV off.
VIZIO SV320XVT & SV370XVT User Manual Rear Panel Connections 1. HDMI 1 & 2 – Connect digital video devices such as DVD multimedia players or set top box through these all digital connectors. 2. RGB PC – Connect the video and audio from a computer here. A cable with a 1/8” mini plug stereo connector at the end connecting to the TV is needed if sound is also transmitted with this signal. 3. S-VIDEO/AV – Connect composite or S-Video video devices, such as a VCR or video game.
VIZIO SV320XVT & SV370XVT User Manual VIZIO Remote Control POWER ( ) – Press this button to turn the TV on from the Standby mode. Press it again to return to the Standby mode. SET – This button starts all programming of the Remote Control. HDMI – Press this button to select the HDMI input. By pressing it repeatedly you will go through all HDMI inputs in sequence. COMP – Press this button to select Component input. AV – Press this button to select AV (either Composite or S-Video) input.
VIZIO SV320XVT & SV370XVT User Manual press this button to select folders and files and to play/pause a slideshow, playing music, or movies. !"# $ -These buttons are used to navigate the OSD menu. They will also be used as value settings when the slide bar is shown on the screen and option settings to turn a feature off or on. GUIDE – This button displays program information. Note: This function is only available on DTV. LAST – This button recalls the previously viewed channel.
VIZIO SV320XVT & SV370XVT User Manual Input Source Rotate the Jog Wheel Left or Right to select Input and press in on the button. Rotate the Jog Wheel Left or Right to cycle through the input sources by the following sequence: TV, AV(Svideo or Composite), COMPONENT, RGB ,HDMI1 , HDMI2, HDMI3. Press in on the button to confirm the channel selection. Exit Rotate the Jog Wheel Left or Right to select Exit. Press in on the button to exit the Quick Menu.
VIZIO SV320XVT & SV370XVT User Manual Chapter 2 Connecting Equipment Which Video Connection Should I Use? The VIZIO HDTV has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays. Connection Quality (type) Connector Description Best (digital) HDMI provides an interface between any audio/video source, such as a set-top box, DVD player, or A/V receiver and a digital television (DTV), over a single cable.
VIZIO SV320XVT & SV370XVT User Manual Connecting Your Cable or Satellite Box You have four options for connecting your cable or satellite box to your HDTV: HDMI, Component, Composite, or Coax (RF). Based on your home theater configuration, you can decide which option is the right one for you. Refer to your set-top box user manual for more information about the video output requirements or consult your cable or satellite operator.
VIZIO SV320XVT & SV370XVT User Manual HDMI Connections for Cable or Satellite Boxes with DVI SET TOP BOX 1. 2. 3. 4. 5. Turn off the power to the HDTV and HDTV Set-Top Box. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI 3 input at the rear of the HDTV.
VIZIO SV320XVT & SV370XVT User Manual Using S-Video (Compatible) SET TOP BOX 1. Turn off your HDTV and set-top box. 2. Connect the S-VIDEO cable from your set-top box to the S-VIDEO jack on the back of your HDTV. 3. Connect the audio cables (white and red) on your set-top box to the corresponding L and R AUDIO jacks on the back of your HDTV. 4. Turn on your HDTV and set-top box. 5. Press AV on the remote control to view the content. Using Composite Video (Compatible) SET TOP BOX 1.
VIZIO SV320XVT & SV370XVT User Manual Connecting Coaxial (RF) Using Your Antenna or Digital Cable for Standard TV or Digital TV CABLE BOX 1. 2. 3. 4. Turn off the power to the HDTV. Connect the coaxial (RF) connector from your antenna or cable to the DTV/TV CABLE/ANTENNA connector at the rear of the HDTV Turn on the power to the HDTV. Select TV using the INPUT button on the remote control, or directly by pressing the TV button on the remote control. Using the Antenna or Cable through Your VCR VCR 1.
VIZIO SV320XVT & SV370XVT User Manual Connecting Your DVD Player You have several options for connecting your DVD player to your HDTV: HDMI, Component, S-Video and Composite (AV) inputs. Based on your home theater configuration, you can decide which option is the right one for you. Using HDMI (Best) CD DVD For optimal results, DVD players that have a digital interface such as HDMI should be connected to the HDMI input on your HDTV. 1. 2. Turn off your HDTV and DVD player.
VIZIO SV320XVT & SV370XVT User Manual Using Component Video (Better) CD DVD 1. 2. 3. 4. 5. Turn off the power to the HDTV and DVD player. Connect the component cable (green, blue, and red) from your DVD player to the COMPONENT jacks on the back. Connect the audio cables (white and red) from your DVD player to the COMPONENT L and R AUDIO jacks on the back. Turn on the power to the HDTV and DVD player.
VIZIO SV320XVT & SV370XVT User Manual Using Composite (AV) Video (Compatible) CD DVD 1. 2. 3. 4. 5. Turn off the power to the HDTV and DVD player. Connect the Video cable (yellow) from your DVD player to the S-VIDEO/AV jack on the back of your HDTV. Connect the audio cables (white and red) on your DVD player to the S-VIDEO/AV L and R AUDIO jacks on the back of your HDTV. Turn on the power to the HDTV and DVD Player.
VIZIO SV320XVT & SV370XVT User Manual Connecting an External Receiver/Amp STEREO SYSTEM 1. 2. 3. 4. Turn off the power to the HDTV and Receiver/Amp. Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the AUDIO OUT audio connectors at the rear of the HDTV. Turn on the power to the HDTV and Receiver/Amp. Then press the MENU button on the remote control to open the On-Screen Display (OSD) menu. 5.
VIZIO SV320XVT & SV370XVT User Manual Connecting a Computer COMPUTER 1. 2. 3. 4. 5. Turn off the power to the HDTV and Computer. Connect the VGA cable from your computer to the RGB PC jack on the back of your HDTV. Connect the 1/8-inch audio cable from your computer to the RGB PC Audio jack on the back of your HDTV. This step is optional and only needed if you want to transmit audio from the Computer through the TV. Turn on the power to the HDTV and Computer.
VIZIO SV320XVT & SV370XVT User Manual Preset PC Resolutions If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1920x1080 at 60Hz for better picture quality (refer to the graphic card’s user guide for questions on how to set this timing mode). See the table below for the factory preset resolutions. Also see Resolution through RGB Input chart below for the best resolution available through RGB PC input when video card supports 1920x1080 resolution. Refresh Horiz.
VIZIO SV320XVT & SV370XVT User Manual Chapter 3 Using the Media Port With the Multimedia Viewer you can enjoy digital content such as photos, music, and movies on your HDTV using a USB flash drive connected to the Media Port on the left-hand side of the TV. USB drives that are USB 2.0 and FAT or FAT32 are supported but the Media Port does not support hard drives or USB hubs. If your USB drive is oversized and does not physically fit in the Media Port, use a USB extension cable.
VIZIO SV320XVT & SV370XVT User Manual Viewing Multimedia Content 1. Insert a USB device with digital content such as photos, music, and movies into the Media Port on the left-hand side of your HDTV. If a USB device is already connected, press the MEDIA button on the remote control. A message will appear asking if you want to play multimedia content. 2. Press $ or # to highlight OK, and then press OK to select it. 3.
VIZIO SV320XVT & SV370XVT User Manual Picture Settings When viewing pictures you can adjust various settings, including slideshow, picture duration, etc. 1. Insert a USB device and select the Picture Folder. 2. Press the MENU button on the remote control. The Picture menu will be displayed. 3. Press ! or " on the remote control to highlight Picture menu option, and then press $ or # to adjust the setting. 4. Press the MENU button once to close the menu.
VIZIO SV320XVT & SV370XVT User Manual Slideshow Effect Choose from Random, Dissolve, Wipe Right, Wipe Left, Wipe Up, Wipe Down, Box In, or Box Out to set the transition type when changing from one picture to another during a slideshow. Thumbnail Size Set the size of the preview pictures (thumbnails) in the menu. Choose from Small, Medium, or Large. Info When set to on, information about the picture briefly appears on the TV.
VIZIO SV320XVT & SV370XVT User Manual Video Settings When watching videos you can adjust various settings, including selecting an audio mode, setting to a wider format, etc. 1. Insert a USB device and select the Video Folder. 2. Press the MENU button on the remote control. The Video menu will be displayed. 3. Press ! or " on the remote control to highlight Video menu option, and then press $ or # to adjust the setting. 4. Press the MENU button once to close the menu.
VIZIO SV320XVT & SV370XVT User Manual Chapter 4 Using your HDTV the first time Setup Wizard 1. Connect the Power Cable Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an AC wall socket. 2. Connect Audio and Video Cables to the HDTV (see Chapter 2 for detailed steps) 3. Turn Power On Once all the components are connected, press the Power ON button on the remote control or on the side of your HDTV. 4. Initial Setup a.
VIZIO SV320XVT & SV370XVT User Manual Note: At this point, if a set-top box from your cable or satellite service company is being used, press the OK button on the remote control and select Skip Scan. Otherwise continue with next step: h. The Tuner screen will be displayed. If you are using Cable Service (with no box), press the " button on the remote control to choose CABLE. i. Press the OK button on the remote control to go to the next screen. j.
VIZIO SV320XVT & SV370XVT User Manual Select Input Source Select the Input Source for the HDTV by pressing the INPUT button on the remote control. Pressing this button will cycle you through the following options: TV, AV, Component, RGB, HDMI1, HDMI2, and HDMI3. Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see a picture on your HDTV. If there is no picture, make sure you have selected the correct input on the HDTV.
VIZIO SV320XVT & SV370XVT User Manual Fine Tuning the picture 1. Press the MENU button to bring up the Menu display. The Picture Menu is highlighted. Press OK to select it. Use the ! or ! buttons to scroll to the Advanced Video option. 2. Press the # button to select it. 3. Use either ! or " to scroll to the Color Temperature option. 4. Press the # button to select it. 5. Press either $ or # to change setting to Normal, and then press the MENU button repeatedly until the Picture Mode is displayed. 6.
VIZIO SV320XVT & SV370XVT User Manual Watching a TV Program Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. 1. Press the power button on the remote control. The VIZIO logo on the front will change from orange to white. 2. There are 3 options for selecting your programming: a.
VIZIO SV320XVT & SV370XVT User Manual Adjusting Basic HDTV Settings Volume To adjust the volume, press and hold the VOL+ or VOL- button or remote control until the desired level is reached. TV Channels To step up or down through the available TV channels, press the CH ! or " button on the remote control once for the next or previous channel, or hold it depressed until the desired channel is reached. Note: Channel up and down will only operate in TV mode.
VIZIO SV320XVT & SV370XVT User Manual Chapter 5 Advanced Adjustment of HDTV Using the On Screen Display (OSD) The remote control can control all the function settings. The On Screen Display (OSD) allows you to adjust contrast, brightness and other settings. The TV will save changes made to the settings, even if the TV is turned off. The OSD consists of several menu options: Picture, Audio Mode, TV, and Setup. The main menu options may vary depending on your selected input source.
VIZIO SV320XVT & SV370XVT User Manual Picture Menu 1. 2. 3. 4. 5. Press the MENU button on the remote control. Press ! or " on the remote control to highlight the Picture menu, and then press OK to select it. Press ! or " on the remote control to select a Picture menu option. Once the menu option is highlighted, press $ or # on the remote control to adjust the setting. Press the MENU button once to return to the previous screen or repeatedly to return to your program if the task has been completed.
VIZIO SV320XVT & SV370XVT User Manual Advanced Video To select the options in the Advanced Video sub-menu, press the OK button or the # button. A new menu will be displayed showing the advanced functions available for fine tuning of the picture. Noise Reduction This feature diminishes picture artifacts caused by the digitizing of image motion content that may be present in the picture. Choose from the Off, Low, Medium, or Strong setting.
VIZIO SV320XVT & SV370XVT User Manual Audio Menu 1. 2. 3. 4. 5. Press the MENU button on the remote control and the Picture menu will be shown on the screen. Press ! or " on the remote control to highlight the Audio menu, and then press OK to select it. Press ! or " on the remote control to select an Audio menu option. Once the menu option is highlighted, press $ or # on the remote control to adjust the setting.
VIZIO SV320XVT & SV370XVT User Manual Analog Audio Out This option sets the volume control properties when using the RCA (white and red) connectors as audio line out to connect a Receiver/Amplifier/Home Theater system. Choose from Fixed or Variable. When set to Variable, volume from the external speakers will change according to the volume setting on the TV. If it is set to Fixed, the volume can only be changed by the settings on the external stereo system.
VIZIO SV320XVT & SV370XVT User Manual TV Menu When you first turned on your HDTV you set up your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV menu. 1. 2. 3. 4. 5. Press the MENU button on the remote control and the Picture menu will be shown on the screen. Press ! or " on the remote control to highlight the TV menu, and then press OK to select it. Press ! or " on the remote control to select a TV menu option.
VIZIO SV320XVT & SV370XVT User Manual Setup Menu 1. 2. 3. 4. 5. Press the MENU button on the remote control and the Picture menu will be shown on the screen. Press ! or " on the remote control to highlight the Setup menu, and then press OK to select it. Press ! or " on the remote control to select an Input menu option. Once the menu option is highlighted, press $ or # on the remote control to adjust the setting.
VIZIO SV320XVT & SV370XVT User Manual PIP Source Select the input source for the sub-screen. The input sources available will vary according to which input is used for the main screen. SUB Component HDMI1, HDMI2, HDMI3 RGB DTV ! ! ! TV ! ! ! AV ! ! ! MAIN DTV TV AV Component ! ! ! HDMI 1 ! ! ! ! ! HDMI 2 ! ! ! ! ! HDMI 3 ! ! ! ! ! RGB ! ! ! ! ! “!” – Indicates which inputs are available for PIP and POP modes.
VIZIO SV320XVT & SV370XVT User Manual Input Naming This feature helps you identify the input being watched. You can use up to 8 characters; either letters or numbers or combinations of both, to add a name that will make it easier for you to recognize the input. 1. Press the # button to go to the next screen that shows the different inputs. 2. Press the " button to select the desired input which you want to label. 3. Press the OK button to go to the first space in the bracket. 4.
VIZIO SV320XVT & SV370XVT User Manual H/V Position To select the options in the H/V Position sub-menu, press the MENU button or the # button. A new menu will be displayed showing the following H/V Position settings: H-Position Adjust the horizontal position of the picture. V-Position Adjust the vertical position of the picture. H-SIZE Adjust the horizontal size of the picture. V-SIZE Adjust the vertical size of the picture.
VIZIO SV320XVT & SV370XVT User Manual US TV Rating Note: When Rating Enable is OFF, US TV Rating adjustments are not available.
VIZIO SV320XVT & SV370XVT User Manual Canadian French Rating Note: When Rating Enable is OFF, Canadian French Rating adjustments are not available.
VIZIO SV320XVT & SV370XVT User Manual Understanding Viewing Features Your HDTV features the following viewing modes. You can switch viewing modes using the remote control, please follow the instructions on page 14. Viewing Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image. Standard TV broadcasts are displayed with a 4:3 Aspect Ratio. Movies in 4:3 Aspect Ratio may be referred to as pan-and-scan or full frame.
VIZIO SV320XVT & SV370XVT User Manual Chapter 6 Programming the VIZIO Universal Remote Control You can program the remote control to work with up to four different pieces of equipment including your VIZIO HDTV. Listed below are the steps for programming your VCR, Cable Box and DVD Player. Programming for VCR 1. 2. 3. 4. Manually turn on the VCR. Press the VCR button on the remote control. Press and hold the SET button until the LED LIGHT flashes twice.
VIZIO SV320XVT & SV370XVT User Manual Programming for DVD Player 1. 2. 3. 4. Manually turn on the DVD Player. Press the DVD button on the remote control. Press and hold the SET button until the LED LIGHT flashes twice. Find the programming code for your DVD player in the code list in the back of this book and enter it using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
VIZIO SV320XVT & SV370XVT User Manual Chapter 7 Maintenance and Troubleshooting Maintenance Important 1. 2. Make sure that the power cable is removed from the socket before cleaning the TV. Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may damage the housing, screen glass and remote control, and cause paint to peel. Cleaning the Housing and Remote Control 1. 2. Use a soft cloth for cleaning.
VIZIO SV320XVT & SV370XVT User Manual Troubleshooting Guide If the TV fails or the performance changes dramatically, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the display still fails to perform as expected, contact the VIZIO for assistance by calling 1-877-MYVIZIO (6984946) or e-mail us at techsupport@vizio.com.
VIZIO SV320XVT & SV370XVT User Manual General TV Problems You cannot see a picture. Solution ! Standard, analog TV will always be noticeably inferior to HD because your digital flat panel TV has video that is many times better than old TV so you will see interference and deficiencies you did not know you had. ! Make sure the power button is ON (VIZIO logo glows white). ! Make sure AC power cord is securely connected to the AC socket.
VIZIO SV320XVT & SV370XVT User Manual General TV Problems Solution followed by Composite. Tips for Letterbox Content Users. ! Due to variances in broadcast practices, it is possible some image distortions can occur. ! Some Letterboxed (or “Widescreen”) versions of DVD movies are formatted for standard 4:3 Televisions. Your HDTV has the ability to expand this content so the entire screen is filled at the expense of image accuracy.
VIZIO SV320XVT & SV370XVT User Manual Compliance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. USA Canada Germany UK Japan UL CSA VDE BASE/BS Electric Appliance Control Act FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
VIZIO SV320XVT & SV370XVT User Manual Chapter 8 Specifications Specifications Panel SV320XVT: 31.55” Diagonal, 16:9 Aspect Ratio SV370XVT: 37” Diagonal, 16:9 Aspect Ratio Resolution 1920 x 1080 pixels Pixel (Dot) Pitch SV320XVT: 0.36375mm(H) x 0.36375mm(V) SV370XVT: 0.42675mm(H) x 0.42675mm(V) Display Compatibility HDTV (1080P) Colors 1.
VIZIO SV320XVT & SV370XVT User Manual Power Input IEC Connector for direct power line connection Voltage Range 100~240Vac at 50/60Hz Power Consumption SV320XVT: 98W (Avg), <0.5W standby SV370XVT: 125W (AVG) , <0.5W standby Environmental Conditions Operating Temperature: 5°C~35°C, Relative Humidity: 20~80%, Altitude: 0~14,000 ft Non-Operating Temperature: -20°C~50°C, Relative Humidity: 10~70%, Altitude: 0~40,000 ft Dimensions SV320XVT: 30.6"W x 22.4" H x 9.3" D with stand; 30.6" W x 22.1" H x 2.
VIZIO SV320XVT & SV370XVT User Manual Remote Control Codes TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) 3M 10195 888 10462 A.R.
VIZIO SV320XVT & SV370XVT User Manual TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) 10385, 10392, 10405, 10460, 10462 10062, 10064, 10229, 10230, 10232, 10238, 10239, 10254, 10259, 10265, 10280 Cathay 10353 Caton 10355 CCE 10246, 10258, 10353 Chung Hsin 10048, 10234, 10332 Celebrity 10046 Chunlan 10397, 10468 CXC 10054, 10234 Celera 10075 Chunsun CyberHome 10294 Centurion 10051, 10353
VIZIO SV320XVT & SV370XVT User Manual TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) Durabrand 10042, 10078, 10227, 10234, 10236, 10248, 10272 Dux 10353 D-Vision 10353 Dwin 10232, 10293 Dynatech 10262 Dynatron 10353 Dynex 10143, 10189 Ectec 10278 Eiki 10169, 10170 Electroband 10046, 10274 Electrograph 10206, 10321 Electrohome 10046, 10047, 10049, 10078 TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) 10460 GFM 10040, 10140 Feiyan 10376, 10384, 10385, 10392, 10462 Gibralter 1002
VIZIO SV320XVT & SV370XVT User Manual TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) Hantor 10353 Huanghaimei Harley Davidson 10260, 10273, 10324 10362, 10368, 10460 Huanghe 10360, 10362, 10366, 10367, 10368, 10378, 10380, 10383, 10395, 10406, 10457, 10460, 10461 Harman/Kardon 10034, 10044 Harvard 10054, 10234 Harwood 10353 Hauppauge 10353 Havermy 10232 HCM 10279, 10353 Helios 10145 Hello Kitty 10210, 10280 Hewlett Packard 10101, 10
VIZIO SV320XVT & SV370XVT User Manual TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) 10426, 10457, 10462 Juhua JVC 10457, 10461, 10462 10036, 10037, 10038, 10052, 10057, 10059, 10078, 10257 TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) Kost 10306 MAG 10295 Kreisen 10298 Magnasonic 10325, 10347 KTV 10054, 10064, 10229, 10234, 10246, 10254, 10259, 10274 Magnavox Kuaile 10460, 10462 Kunlun 10357, 10360, 10365, 10368, 10376, 10377, 10378, 1037
VIZIO SV320XVT & SV370XVT User Manual TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) Micromaxx 10353 Midland 10020, 10057, 10064, 10065, 10228, 10230, 10256, 10259 TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) 10462 NEC 10047, 10048, 10049, 10162, 10212, 10218, 10229, 10252, 10254, 10257, 10265, 10271, 10351, 10352 TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) Orion 10078, 10193, 10236, 10273, 10351, 10353 Orline 10353 Osaki 10277, 10279, 10348, 10352, 10353 Minato 10353 Minerva 10048, 1
VIZIO SV320XVT & SV370XVT User Manual TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) Philips 10029, 10030, 10031, 10032, 10033, 10034, 10035, 10044, 10047, 10048, 10050, 10052, 10058, 10072, 10074, 10104, 10134, 10177, 10187, 10250, 10258, 10282, 10352, 10353 Protech 10277, 10353 Rex 10277 Proton 10047, 10049, 10052, 10248, 10255, 10263, 10272 RFT 10353 Rhapsody 10246, 10274 R-Line 10353 Protron
VIZIO SV320XVT & SV370XVT User Manual TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) Scimitsu 10252 Scotch 10049, 10272 Scott 10047, 10049, 10052, 10054, 10055, 10150, 10234, 10252, 10272, 10273 Sears 10016, 10034, 10042, 10044, 10047, 10049, 10055, 10059, 10067, 10160, 10230, 10233, 10265, 10270, 10272, 10273, 10324, 10346 Seg 10277, 10353 SEI 10249, 10353 SEI-Sinudyne 10353 Semivox 10234 Shancha 10457, 10462 Shangguangdian 10445 Shanghai 10359, 10360, 10362, 10363, 10366, 10367, 1036
VIZIO SV320XVT & SV370XVT User Manual TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) Taishan 10360, 10362, 10368, 10370, 10371, 10372, 10373, 10374, 10379, 10457, 10460 Telestar 10353 United 10353 Teletech 10353 Universal 10056, 10353 Teleview 10353 Universum Tennessee 10353 10277, 10281, 10351, 10353 10232 Tensai 10352, 10353 Tandy Tantec 10348 Tera 10255 Tashiko 10353 Tevion 10353
VIZIO SV320XVT & SV370XVT User Manual TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) TV Codes (including TV/DVD, TV/VCR, TV/DVD/VCR) Watson 10353 Xiangyu Yapshe 10341 Wega 10353 10362, 10368, 10375, 10460 YingGe Xihu 10360, 10366, 10367, 10376, 10378, 10380, 10384, 10392, 10422, 10457, 10461, 10462 10448, 10460, 10461 Yoko 10277 Wega Color 10435 Weipai 10460 Westinghouse 10094, 10098, 10186, 10299 Yonggu 10460, 10461 Youlanasi 10457,
VIZIO SV320XVT & SV370XVT User Manual Cable Box Codes Cable Box Codes Cable Box Codes (including Cable / PVR Boxes) (including Cable / PVR Boxes) (including Cable / PVR Boxes) Motorola 40000, 40003, 40007, 40072, 40105 Regal 40045 40004 Regency 40042 TIME WARNER 40031 40040 40048 Rembrandt Timeless Movie Time 40119 40032 40112 Rogers Tocom Multitech 40107 40115 40120 Runco Torx Multivision Trans PX 40105 NET Brazil 40070 40006, 40040, 40049, 40069, 40109 40107 40033 Sa
VIZIO SV320XVT & SV370XVT User Manual Satellite Receiver Codes Satellite Receiver Codes Satellite Receiver Codes (including Sat / PVR Boxes) (including Sat / PVR Boxes) (including Sat / PVR Boxes) AccessHD 40096 GOI 40144 Proscan Alpha Digital 40096 Goodmind 40098 40012, 40013, 40138 AlphaStar 40064 Hisense 40143 Proton 40143 Apex Digital 40103 Hitachi 40029, 40065 RadioShack 40142 Artec 40092 HTS 40144 RCA CaptiveWorks 40088 Channel Master 40097 Hughes Network Systems
VIZIO XVT472SV User Manual PVR Codes DVD Player Codes Computers Blu-Ray DVD Player Codes Bang & Olufsen 20302 HTS 20408 Denon 20143, 20144 Blaupunkt 20136, 20301 Hughes Network Systems 20240, 20238, 20241, 20243, 20407 Insignia 20142 Blue Parade 20298 LG 20132 Bose 20238 Marantz 20145, 20146 20076, 20086, 20393, 20394 Hush 20410 Panasonic BOSS 20138 iBUYPOWER 20410 20128, 20129, 20130, 20197, 20198 Boston Acoustics 20331 JVC 20238, 20408 Linksys 20410 Media Center PC
VIZIO XVT472SV User Manual DVD Player Codes DVD Player Codes DVD Player Codes Durabrand 20309 iSymphony 20190 DVD2000 20295 Jamo 20206 Dynex 20193 JBL Eclipse 20126 Electrohome 20395 Emerson 20041, 20135, 20283, 20303, 20310 Enterprise 20303 ESA 20182, 20310 Fisher 20168, 20304 Funai 20310 Gateway 20327 GE 20082, 20296, 20301 Gewang 20361 GFM 20149 Giec 20355 Go Video Magnavox 20081, 20142, 20283, 20294, 20297, 20310 20104, 20305 Malata 20346 Jensen 20171, 20289
VIZIO XVT472SV User Manual DVD Player Codes DVD Player Codes 20314 Pioneer 20042, 20043, 20044, 20045, 20134, 20147, 20234, 20298 DVD Player Codes 20228, 20282, 20294 Sharp 20120, 20139, 20140, 20141, 20204, 20328 Tredex 20318 Sharper Image 20323 Trutech 20186, 20218 Sherwood 20203, 20317 Tsinghuatongfang 20357 Polaroid 20027, 20133, 20208, 20402 Shinco 20136 Tview 20173 Polk Audio 20297 Shinsonic 20159, 20293 Urban Concepts 20294 Portland 20317 Shumaling 20337 US Logic 20
VIZIO XVT472SV User Manual Amplifier / Receiver / Tuner Codes Amplifier / Receiver / Tuner Codes Amplifier / Receiver / Tuner Codes Technologies Kenwood 30036, 30037, 30038, 30039, 30040, 30065, 30071, 30077, 30137 DBX 30174 AMW 30140 Dell 30217 Anam 30135, 30149 Delphi 30218 Antex 30168 Denon Apex 30099 30051, 30052, 30053, 30054, 30055, 30102 KLH 30139 Apple 30169 Klipsch 30147 D-Link 30175 Aragon 30201 Koss 30117, 30138 EAD 30219 Atlantic Technology 30170 Krell 301
VIZIO XVT472SV User Manual Amplifier / Receiver / Tuner Codes Amplifier / Receiver / Tuner Codes Nubert 30188 Sanyo 30118 Nuvo 30239 Sharp Olive 30189 30101, 30122, 30259 Omnifi 30190 Sherwood 30089, 30123 Onkyo 30041, 30042, 30043, 30044, 30045, 30067, 30069, 30070, 30075, 30080, 30091 Shure 30131 Zektor 30198 SII 30247 Zenith 30090 Sonic Blue 30141, 30153 Zon 30199 Sony 30000, 30001, 30002, 30003, 30004, 30005, 30006, 30007, 30056, 30057, 30058, 30059, 30061, 30064, 30074,
VIZIO XVT472SV User Manual Audio Accessory Codes Audio Accessory Codes VCR Codes (including CD Players and Soundbars) (including CD Players and Soundbars) Dynamics Dynamic Bass 30332 Polk Audio 30331 Emerson 30279 Proton 30331 Garrard 30307 QED 30331 Genexxa 30329 Quad 30331 GPX 30280 RCA 30266 Harman/Kardon 30273 Realistic 30332 Hitachi 30308 Rotel 30331 iHome 30288 SAE 30331 iLuv 30286 Samsung 30323 Inkel 30309 Sansui iSymphony 30286 JVC Audiovox 20248, 20
VIZIO XVT472SV User Manual VCR Codes VCR Codes 20248, 20419 20050, 20054, 20067, 20246, 20247, 20248, 20249, 20250, 20414, 20416, 20419 Pye 20281 Quarter 20246 Quartz 20246 Quasar 20249, 20416 MGA 20052, 20054, 20418 RadioShack 20410 MGN Technology 20054, 20247 20050, 20065, 20248, 20249, 20065, 20246, 20247, 20250 Hitachi 20050, 20055 Microsoft 20410 Radix 20248 Howard Computers 20410 Mind 20410 Randex 20248 20055, 20407 Minolta 20055 RCA Hughes Network Systems Mitsubish
VIZIO XVT472SV User Manual VCR Codes VCR Codes Sylvania 20050, 20052, 20062, 20063, 20249, 20250 Tivo 20407 Viewsonic 20410 TMK 20054, 20247 Villain 20050 Symphonic 20050, 20062, 20063, 20250 Toshiba 20051, 20052, 20060, 20259, 20410 Voodoo 20410 Wards Systemax 20410 Totevision Tagar Systems 20410 20054, 20247, 20248 20050, 20054, 20055, 20065, 20247, 20248, 20249, 20250 Tandy 20246 Touch 20410 XR-1000 20248 Unitech 20054, 20247 20050, 20249, 20250 Yamaha Teac 20050, 20
VIZIO SV320XVT & SV370XVT User Manual Limited Product Warranty VIZIO provides a “ONE-YEAR LIMITED WARRANTY” against manufacturing defects in materials and workmanship to the original purchaser of a new VIZIO display purchased from an authorized VIZIO U.S. reseller and used in the fifty (50) United States or Puerto Rico. VIZIO's Responsibility VIZIO displays purchased new from an authorized VIZIO U.S.
VIZIO SV320XVT & SV370XVT User Manual limited warranty. Installation, removal, transportation and reinstallation of a display, and routine maintenance and cleaning, are not covered by this limited warranty. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE.
VIZIO SV320XVT & SV370XVT User Manual On-Site Warranty Repair Procedure On-Site Warranty Repair generally is performed on repairable displays which are 30 inches and larger. If VIZIO Technical Support determines that a problem with a display unit may be within the terms and conditions of the VIZIO Limited Product Warranty and that an on-site repair may be performed, the customer will be provided with an on-site repair authorization number and on-site repair instructions.
VIZIO SV320XVT & SV370XVT User Manual Index Accessories................................................................9 Adjustments Closed Caption.....................................................14 Selecting the Screen Size ....................................14 Advanced Adjustments ............................................39 Antenna....................................................................17 Audio Menu Analog Audio Out adjustments.............................43 Audio Mode adjustments....
VIZIO SV320XVT & SV370XVT User Manual Programming to work your VCR...........................52 Range ..................................................................16 Using your Cable or Satellite Remote to Operate your VIZIO TV ..................................................53 Reset All Settings.....................................................50 Resetting the System ...............................................50 RGB .........................................................................