MODEL SB4020E-A0-NA VIZIO QUICK START GUIDE
Important safety information Your Sound Bar is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Sound Bar from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Sound Bar. Keep these instructions in a safe place for future reference. Please heed all warnings and follow all instructions.
PACKAGE CONTENTS Sound Bar MODEL SB4021E-A0 SUB- MUTE SRS TVOL Power Adapter with Cable Wall Mount Brackets SUB+ VIZIO QUICK START GUIDE SRS TSHD Remote Control with Battery Wall Mount Template Cables may vary slightly from those shown. This Quick Start Guide Stereo RCA to 3.
CONNECTIONS BOTTOM OF SOUND BAR Located on Side Power Port Service Port (For Service Technician Only) Aux Input Aux Input (Stereo 3.
FIRST-TIME SETUP 1 AUDIO OUT AUDIO OUT BACK OF YOUR TV* CHOOSE A METHOD Connect the included Stereo Cable to a TV audio output as shown. BOTTOM OF SOUND BAR *Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
2 3 4
5 Sound Bar is centered below the TV. When using the remote, point it at the center of the Sound Bar. The sensor is located there. For the best surround sound experience, position the Sound Bar as shown.* The Sound Bar should be close to ear level.
6 Gently pull the plastic tab from the back of the remote control. (The plastic tab can be thrown away) 7 Turn your TV on, then press the Power button on the remote to turn the Sound Bar on. Power Press the Input button to cycle through the audio inputs. For example, if you connected your TV to Aux 1, set the Sound Bar to Aux 1. Setup is complete.
Using the remote Power Press to turn on or off. Volume Up Press to increase volume. Mute Press to mute. Sub Volume Down Press to decrease subwoofer volume. (When optional SUB Out is used) SRS TVOL Press to enable/disable SRS TruVolume. Input Press to change input source. SUB- MUTE SUB+ Sub Volume Up Press to increase subwoofer volume. (When optional SUB Out is used) Volume Down Press to decrease subwoofer volume.
Indicator LEDs LED Indicators located here: Indicator LEDs flash according to input selection: Optical Input 3* AUX Input 2 AUX Input 1 *Rapid flash indicates incompatible source. If there is no sound output, see Help & Troubleshooting page.
Indicator LEDs (continued) LED Indicators located here: When the four center Indicator LEDs are brightly lit, the selected SRS mode is enabled. When the LEDs are not lit, SRS mode is disabled.
wall mounting the sound bar 1 Place the included wall mounting template against the wall under your TV. Mark the locations of the 4 bracket holes using a pencil. 32.24’’/ 819mm 32.24’’/ 819mm 80g White paper, 920x160mm, 2折后尺寸:230x160mm 请按照档案1:1印刷 80g White paper, 920x160mm, 2折后尺寸:230x160mm 请按照档案1:1印刷 2 Be sure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls). Screws for attachment to the wall are not included.
help & troubleshooting There is no power. • Press the POWER button on the remote control or on the top of your Sound Bar. • Ensure the power cord is securely connected. • Ensure the light on the power adapter is glowing green. • Plug a different device into the electrical outlet to verify that the outlet is working correctly. There is no sound. • Increase the volume. Press Volume Up on the remote control. • Press MUTE on the remote to ensure the Sound Bar is not muted.
one-year limited warranty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
legal & compliance FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Notes
do you have questions? LET US HELP! YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT The VIZIO support team is highly trained and is based in the United States. We can help with: • New Product Setup • Connecting Your Devices • Technical Problems • And More Phone: (877) 878-4946 (TOLL-FREE) Email: techsupport@VIZIO.com Web: www.VIZIO.
MODÈLE SB4020E-A0-NA VIZIO GUIDE DE DÉMARRAGE RAPIDE
Informations de sécurité importantes Votre barre de son est conçue et fabriquée pour fonctionner dans les limites de conception définies, et une mauvaise utilisation peut entraîner un choc électrique ou un incendie. Pour éviter d’endommager votre barre de son, vous devez respecter les règles suivantes pour l’installation, l’utilisation et l’entretien. Veuillez lire les instructions de sécurité suivantes avant de faire fonctionner votre barre de son.
CONTENU DU PAQUET Barre de son MODEL SB4021E-A0 SUB- MUTE SRS TVOL Adaptateur d’alimentation avec câble Fixations du support mural SUB+ VIZIO QUICK START GUIDE SRS TSHD Télécommande avec pile Ce guide de démarrage rapide Modèle de support mural Câble audio stéréo RCA pour prise de 3,5 mm Les câbles peuvent varier légèrement de ceux illustrés.
CONNEXIONS BAS DE LA BARRE DE SON Située sur le côté Port d’alimentation Port de service (Pour le technicien de service uniquement) Entrée auxiliaire Entrée auxiliaire (Stéréo 3,5 mm) (Stéréo RCA) Sortie du caisson (RCA) Entrée optique
PREMIÈRE INSTALLATION 1 AUDIO OUT AUDIO OUT ARRIÈRE DE VOTRE TÉLÉVISEUR* CHOISISSEZ UNE MÉTHODE Connectez le câble stéréo inclus à une sortie audio du téléviseur comme il est illustré. BAS DE LA BARRE DE SON *Tous les téléviseurs n’ont pas les sorties audio affichées ci-dessus. Pour connecter la barre de son directement à vos autres appareils (lecteur Blu-ray, console de jeu, etc.), consultez le manuel de l’utilisateur de votre produit.
2 3 BAS DE LA BARRE DE SON 4
5 La barre de son est placée sous le téléviseur, au milieu. Pour une meilleure expérience de son ambiophonique, placez la barre de son comme il est indiqué.* La barre de son devrait se trouver au niveau de l’oreille. Lorsque vous utilisez la télécommande, pointez-la vers le centre de la barre de son. Le capteur se trouve là.
6 Tirez gentiment sur la languette en plastique se trouvant au dos de la télécommande. (La languette en plastique peut être jetée) 7 Allumez votre téléviseur, puis appuyez sur le bouton Alimentation de la télécommande pour mettre en marche la barre de son. Alimentation SUB- Appuyez sur le bouton Entrée pour parcourir les entrées audio. Par exemple, si vous avez connecté votre téléviseur sur Aux 1, réglez la barre de son sur Aux 1. L’installation est complète.
Utilisation de la télécommande Alimentation Appuyez dessus pour allumer ou éteindre. Volume Haut Appuyez dessus pour augmenter le volume. Muet Appuyez dessus pour mettre en mode muet. Volume Bas du caisson Appuyez dessus pour diminuer le volume du caisson de basses. (Quand l’option SUB Out (sortie du caisson) est utilisée) SRS TVOL Appuyez dessus pour activer/ désactiver SRS TruVolume. Entrée Appuyez dessus pour changer la source de l’entrée.
Voyants DEL Voyants DEL situés ici : Les voyants DEL clignotent selon l’entrée sélectionnée : Entrée optique 3* Entrée AUX 2 Entrée AUX 1 *Un clignotement rapide indique une source incompatible. S’il n’ya aucune sortie de son, consultez la page Aide et dépannage.
Voyants DEL (suite) Voyants DEL situés ici : Quand les quatre voyants DEL du milieu brillent clairement, le mode SRS choisi est activé. Lorsque les DEL ne sont pas illuminés, le mode SRS est désactivé.
Installation murale de la barre de son 1 Placez le modèle de support mural fourni contre le mur, sous votre téléviseur. Marquez les emplacements des quatre trous de fixation à l’aide d’un crayon. 32.24’’/ 819mm 32.
aide et dépannage Il n’y a pas d’alimentation. Il n’y a pas de son. J’entends une vibration ou un sifflement. Je souhaite arrêter la fonction d’arrêt automatique. Je souhaite réinitialiser ma barre de son aux paramètres par défaut. • Appuyez sur le bouton « POWER » (ALIMENTATION) se trouvant sur la télécommande ou sur le dessus de votre barre de son. • Assurez-vous que le cordon d’alimentation est bien connecté. • Vérifiez que le voyant de l’adaptateur d’alimentation est vert.
garantie limitée d’un an SUR LES PIÈCES ET LA MAIN-D’OEUVRE Couvre les unités achetées neuves aux États-Unis et à Puerto Rico uniquement VIZIO offre à l’acheteur original une garantie sur un nouveau produit contre les défauts de matériaux et de fabrication pour un usage non commercial d’un an et un usage commercial de quatre-vingt dix (90) jours. Si un produit couvert par cette garantie est trouvé défectueux au cours de la période de garantie, VIZIO le réparera ou remplacera à sa seul option et discrétion.
légalités et conformités Énoncé concernant l’interférence radio de la norme FCC Class B REMARQUE : Cet équipement a été testé et trouvé conforme selon les limites d’un appareil numérique de Classe B, conformément à la partie 15 des normes FCC. Ces limites sont conçues pour fournir une protection raisonnable contre une interférence nuisible dans une installation résidentielle.
Notes L VO
vous avez des questions? LAISSEZ-NOUS VOUS AIDER! VOTRE PRODUIT COMPREND LE SOUTIEN TECHNIQUE À VIE GRATUIT L’équipe de soutienVIZIO a une grande expérience et est basée aux États-Unis. Nous pouvons vous aider avec : • Installation du nouveau produit • Connexion de vos appareils • Problèmes techniques • Et encore plus Téléphone : (877) 878-4946 (SANS FRAIS) Courriel : techsupport@VIZIO.com Web : www.VIZIO.
© 2012 VIZIO INC. All rights reserved. © 2012 VIZIO INC. Tous droits réservés.