VIZIO QUICK START GUIDE Model: SB4020E-B0
IMPORTANT SAFETY INSTRUCTIONS Your Sound Bar is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Sound Bar from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Sound Bar. Keep these instructions in a safe place for future reference. Please heed all warnings and follow all instructions.
WARNING DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just two (2) hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
PACKAGE CONTENTS SUB- MUTE SRS TVOL High Definition Sound Bar SUB+ SRS TSHD Remote Control with Battery Power Adapter w/Cable Stereo RCA to 3.
CONTROLS & CONNECTIONS Power Port Service Port For use only by service technician. Aux Input (Stereo 3.
Controls located here: Power Button Input Button Volume Up/Down Buttons Indicator LEDs
FIRST-TIME SETUP 1 BOTTOM OF SOUND BAR GOOD 3.5MM TO RCA CABLE BEST BETTER 3.5MM TO RCA CABLE DIGITAL OPTICAL CABLE CHOOSE ONE CABLE: GOOD BETTER BEST AND CONNECT IT TO YOUR TV* *Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
2 3 4
5 Sound Bar is centered below the TV. When using the remote, point it at the center of the Sound Bar. The sensor is located there. For the best surround sound experience, position the Sound Bar as shown.* The Sound Bar should be close to ear level.
6 Gently pull the plastic tab from the back of the remote control. (The plastic tab can be thrown away) 7 Power Turn your TV on, then press the Power button on the remote to turn the Sound Bar on. SUB- Press the Input button to cycle through the audio inputs. For example, if you connected your TV to Aux 1, set the Sound Bar to Aux 1. MUTE SUB+ Setup is complete.
USING THE REMOTE Power Press to turn on or off. Volume Up Press to increase volume. Mute Press to mute. SUB- MUTE SUB+ SUB Press to decrease subwoofer volume. SRS TruVolume Press to enable/disable SRS TruVolume. Input Press to change input source. SUB + Press to increase subwoofer volume. Volume Down Press to decrease volume. SRS TVOL SRS TSHD SRS TruSurround HD Press to enable/disable SRS TruSurround HD. When using the remote, point it at the center of the Sound Bar. The sensor is located there.
INDICATOR LEDS Indicator LEDs located here: Indicator LEDs flash according to input selection: Optical - Input 3* AUX - Input 2 AUX - Input 1 *Rapid flash indicates incompatible source or file format. If there is no sound output, see Help & Troubleshooting page.
Indicator LEDs located here: When the four center Indicator LEDs are brightly lit, the selected SRS mode is enabled. When the LEDs are not lit, SRS mode is disabled.
WALL MOUNTING THE SOUND BAR 1 Place the included wall mounting template against the wall under your TV. Mark the locations of the 4 bracket holes using a pencil. 32.24’’/ 819mm 32.2 32.24’’/ 819mm 80g White paper, 920x160mm, 2折后尺寸：230x160mm 请按照档案1：1印刷 2 80g White paper, 920x160mm, 2折后尺寸：230x160mm 请按照档案1：1印刷 Be sure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls). Screws for attachment to the wall are not included.
VIZIO RECOMMENDS The VIZIO Co-Star™ Stream Player merges live TV and streaming entertainment into one experience, turning any HDTV into the ultimate smart TV. Using the latest version of Google TV™, Co-Star decks out your existing HDTV with apps, full-screen Web browsing and the best in streaming entertainment. And with 1080p Full HD resolution, built-in Wi-Fi, and 3D-readiness, VIZIO Co-Star is the ultimate entertainment upgrade for any high-definition television. Available at www.VIZIO.
HELP & TROUBLESHOOTING There is no power. • Press the POWER button on the remote control or on the top of your Sound Bar. • Ensure the power cord is securely connected. • Ensure the light on the power adapter is glowing green. • Plug a different device into the electrical outlet to verify that the outlet is working correctly. There is no sound. • Increase the volume. Press Volume Up on the remote control. • Press MUTE on the remote to ensure the Sound Bar is not muted.
ONE-YEAR LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DO YOU HAVE QUESTIONS? LET US HELP! YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT The VIZIO support team is highly trained and is based in the United States. We can help with: • New Product Setup • Connecting Your Devices • Technical Problems • And More Phone: (877) 878-4946 (TOLL-FREE) Email: techsupport@VIZIO.com Web: http://store.VIZIO.
© 2013 VIZIO INC. ALL RIGHTS RESERVED.
