VIZIO VO37L FHDTV20A User Manual Dear VIZIO Customer, Congratulations on your new VIZIO VO37LFHDTV20A television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO HDTV High Definition Television. For assistance, please call (877) 668-8462 or e-mail us at www.vizio.com.
VIZIO VO37L FHDTV20A User Manual Important Safety Instructions Your HDTV is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your HDTV from being damaged, the following rules should be observed for the installation, use, and maintenance of your HDTV. Read the following safety instructions before operating your HDTV. Keep these instructions in a safe place for future reference.
VIZIO VO37L FHDTV20A User Manual ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! Do not overload power strips and extension cords. Overloading can result in fire or electric shock. The wall socket should be installed near your HDTV and easily accessible. Only power of the marked voltage can be used for your HDTV. Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
VIZIO VO37L FHDTV20A User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
VIZIO VO37L FHDTV20A User Manual Advisory of the DTV Transition The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local television stations may switch sooner. After the switch, analog-only television sets that receive TV programming through an antenna will need a converter box to continue to receive over-the-air TV. Watch your local stations to find out when they will turn off their analog signal and switch to digital-only broadcasting.
VIZIO VO37L FHDTV20A User Manual Table of Contents Important Safety Instructions..................................................................................................................... 2 Television Antenna Connection Protection ............................................................................................... 4 Advisory of the DTV Transition..................................................................................................................
VIZIO VO37L FHDTV20A User Manual Picture Menu ........................................................................................................................................... 35 Picture Mode........................................................................................................................................ 35 Backlight .............................................................................................................................................. 35 Brightness ....
VIZIO VO37L FHDTV20A User Manual Opening the Package Your HDTV and its accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Once you have opened the carton, check that your HDTV is in good condition and that all of the contents are included. The glass surface can easily be scratched or broken, so handle your HDTV gently and never place your HDTV with the glass facing downwards on a surface without protective padding.
VIZIO VO37L FHDTV20A User Manual TV Setup and Stand Assembly Note: We strongly recommend that two people perform the setup and assembly due to the weight and size of the TV. To unpack the TV and stand base: 1. 2. 3. 4. Remove the remote control, batteries, and power cord from the foam end caps. Remove the two top foam end caps. Remove the stand base under foam end cap. Remove the TV from the box and lay it face down on a clean, flat surface.
VIZIO VO37L FHDTV20A User Manual Setting Up Your HDTV ! ! ! ! ! ! ! Read this user manual carefully before installing your HDTV. The power consumption of your HDTV is about 103W (AVG). Use the included power cord. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be compromised. Your HDTV should be installed on a flat surface to avoid tipping.
VIZIO VO37L FHDTV20A User Manual Chapter 1 Basic Controls and Connections Front Panel POWER ‘VIZIO’ LIGHT– The VIZIO name lights white when powered on and orange when powered off. REMOTE CONTROL SENSOR – Point the remote control directly at this window for the best response to the remote signal. Side Panel Controls POWER ( ) – Switch your HDTV on by pressing the button once. Press the button again to turn off. MENU – This button activates the On Screen Display (OSD).
VIZIO VO37L FHDTV20A User Manual Rear Panel Connections 1. SERVICE – This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service will void the manufacturer’s warranty of this equipment. 2. HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. 3.
VIZIO VO37L FHDTV20A User Manual Right-Side Panel Connection 1. HEADPHONE – Connect your headphone here for personalized listening without disturbing others. 2. AV2 – Connect the secondary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source, then use the yellow connector to connect the external video from the same source. The orange color band on the side of the TV indicates this connection.
VIZIO VO37L FHDTV20A User Manual VIZIO Remote Control GUIDE – This button displays program information. Press this button once when in TV mode and the information of the program being viewed is shown. POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the Standby mode. HDMI – Press this button to select the HDMI input. MUTE – This button turns the sound on and off. TV – Press this button to select TV.
VIZIO VO37L FHDTV20A User Manual Insertion of Batteries in the Remote Control Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover. Precautionary Tips for Inserting the Batteries: ! Only use the specified AA batteries. ! Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.
VIZIO VO37L FHDTV20A User Manual Chapter 2 Connecting Equipment Which Video Connection Should I Use? The VIZIO HDTV has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays. Connection Quality (type) Connector Description Best (digital) HDMI provides an interface between any audio/video source, such as a set-top box, DVD player, or A/V receiver and a digital television (DTV), over a single cable.
VIZIO VO37L FHDTV20A User Manual Connecting Your Cable or Satellite Box You have four options for connecting your cable or satellite box to your HDTV: HDMI, Component, Composite, or Coax (RF). Based on your home theater configuration, you can decide which option is the right one for you. Refer to your set-top box user manual for more information about the video output requirements or consult your cable or satellite operator.
VIZIO VO37L FHDTV20A User Manual HDMI Connections for Cable or Satellite Boxes with DVI SET TOP BOX 1. 2. 3. 4. 5. Turn off the power to the HDTV and HDTV Set-Top Box. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI 2 input at the rear of the HDTV.
VIZIO VO37L FHDTV20A User Manual Using S-Video (Better) SET TOP BOX 1. Turn off your HDTV and set-top box. 2. Connect the S-VIDEO cable from your set-top box to the S-VIDEO jack on the back of your HDTV. 3. Connect the audio cables (white and red) on your set-top box to the corresponding L and R AUDIO jacks on the back of your HDTV. 4. Turn on your HDTV and set-top box. 5. Press AV on the remote control to view the content. Using Composite Video (Good) SET TOP BOX 1.
VIZIO VO37L FHDTV20A User Manual Connecting Coaxial (RF) Using Your Antenna or Digital Cable for Standard TV or Digital TV) CABLE BOX 1. 2. 3. 4. Turn off the power to the HDTV. Connect the coaxial (RF) connector from your antenna or cable to the DTV/TV CABLE/ANTENNA connector at the rear of the HDTV Turn on the power to the HDTV. Select TV using the INPUT button on the remote control, or directly by pressing the TV button on the remote control. Using the Antenna or Cable through Your VCR VCR 1. 2.
VIZIO VO37L FHDTV20A User Manual Connecting Your DVD Player You have several options for connecting your DVD player to your HDTV: HDMI, Component, S-Video and Composite (AV) inputs. Based on your home theater configuration, you can decide which option is the right one for you. Using HDMI (Best) For optimal results, DVD players that have a digital interface such as HDMI should be connected to the HDMI input on your HDTV. CD DVD 1. 2. Turn off your HDTV and DVD player.
VIZIO VO37L FHDTV20A User Manual Using Component Video (Better) CD DVD 1. 2. 3. 4. 5. Turn off the power to the HDTV and DVD player. Connect the component cable (green, blue, and red) from your DVD player to an available set of COMPONENT 1 jacks on the back or side. Connect the audio cables (white and red) from your DVD player to the COMPONENT L and R AUDIO jacks on the back. Turn on the power to the HDTV and DVD player.
VIZIO VO37L FHDTV20A User Manual Using Composite (AV) Video (Good) CD DVD 1. 2. 3. 4. 5. Turn off the power to the HDTV and DVD player. Connect the Video cable (yellow) from your DVD player to the S-VIDEO/AV1 jack on the back of your HDTV. Connect the audio cables (white and red) on your DVD player to the S-VIDEO/AV1 L and R AUDIO jacks on the back of your HDTV. Turn on the power to the HDTV and DVD Player.
VIZIO VO37L FHDTV20A User Manual Connecting an External Receiver/Amp STEREO SYSTEM 1. 2. 3. 4. 5. 6. 7. Turn off the power to the HDTV and Receiver/Amp. Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the AUDIO OUT audio connectors at the rear of the HDTV. Turn on the power to the HDTV and Receiver/Amp. Then press the MENU button on the remote control to open the On-Screen Display (OSD) menu.
VIZIO VO37L FHDTV20A User Manual Connecting a Computer COMPUTER 1. 2. 3. 4. 5. Turn off the power to the HDTV and Computer. Connect the VGA cable from your computer to the RGB PC jack on the back of your HDTV. Connect the 1/8-inch audio cable from your computer to the RGB PC Audio jack on the back of your HDTV. This step is optional and only needed if you want to transmit audio from the Computer through the TV. Turn on the power to the HDTV and Computer.
VIZIO VO37L FHDTV20A User Manual Preset PC Resolutions If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1920x1080 at 60Hz for better picture quality (refer to the graphic card’s user guide for questions on how to set this timing mode). See the table below for the factory preset resolutions. Also see Resolution through RGB Input chart below for the best resolution available through RGB PC input when video card supports 1920x1080 resolution. Resolution Refresh (Hz) H.
VIZIO VO37L FHDTV20A User Manual Chapter 3 Using your HDTV the first time Setup Wizard 1. Connecting the Power Cable Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an AC wall socket. 2. Connect Audio and Video Cables to the HDTV (see Chapter 2 for detailed steps) 3. Turning Power On Once all the components are connected, press the Power ON button on the side of the HDTV, or press the Power ON (Orange) button on the remote control. 4.
VIZIO VO37L FHDTV20A User Manual Note: At this point, if a Set-Top Box from your Local Cable or Satellite Service Company or other equipment is been used; please press the Otherwise continue with the next step. key on the remote control and select Skip Scan. h. The Tuner screen will be displayed. If you are using Cable Service (with no box), press the " button on the remote control to choose CABLE. i. j. k. l. button on the remote Press the control to go to the next screen.
VIZIO VO37L FHDTV20A User Manual Select Input Source Select the Input Source for the HDTV by pressing the INPUT button on the remote control. Pressing this button will cycle you through the following options: TV, AV1/S-VIDEO, AV2, Component1, Component2, RGB, HDMI1, HDMI2, and HDMI3. Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see a picture on your HDTV. If there is no picture, make sure you have selected the correct input on the HDTV.
VIZIO VO37L FHDTV20A User Manual Fine Tuning the picture button to bring up the Menu display. Use the # or ! buttons to scroll to the 1. Press the Advanced Video option. 2. Press the ! button to select it. 3. Use either # or " to scroll to the Color Temperature option. 4. Press the ! button to select it. 5. Press either $ or ! to change setting to Normal, and then press the LAST button to go back to the previous screen. 6. Press either " or ! to select the Picture mode option. 7.
VIZIO VO37L FHDTV20A User Manual Watching a TV Program Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. 1. Press the power button on the remote control. The VIZIO logo on the front will change from orange to white. 2. There are 3 options for selecting your programming: a.
VIZIO VO37L FHDTV20A User Manual Adjusting Basic HDTV Settings Volume To adjust the volume, press and hold the VOL # or " button on the remote control or on side of HDTV until the desired level is reached. TV Channels To step up or down through the available TV channels, press the CH # or " button on the remote control once for the next or previous channel, or hold it depressed until the desired channel is reached. Note: Channel up and down will only operate in TV mode.
VIZIO VO37L FHDTV20A User Manual Program Information When watching a digital TV program, the On Screen Display will function as follows: ! When a channel is selected, an information header is shown over the picture for a few seconds. ! When you press the GUIDE button on the remote control, the information header and a short summary of the program content, when available from the broadcaster, is displayed.
VIZIO VO37L FHDTV20A User Manual Chapter 4 Advanced Adjustment of HDTV Using the On Screen Display (OSD) The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust contrast, brightness and other settings. The TV will save changes made to the settings, even if the TV is turned off. The OSD consists of several menu options: Picture, Audio Adjust, TV, and Setup.
VIZIO VO37L FHDTV20A User Manual Picture Menu 1. 2. 3. 4. Press the button on the remote control and the Picture OSD appears. Press # or " on the remote control to select a Picture menu option. Once the menu option is highlighted, press $ or ! on the remote control to adjust the setting. Press the LAST button once to return to the previous screen or repeatedly to return to your program if the task has been completed.
VIZIO VO37L FHDTV20A User Manual Advanced Video Press the "button to select Advanced Video, then press the ! button. A new menu will be displayed showing the advanced functions available for fine tuning of the picture. Noise Reduction This feature diminishes picture artifacts caused by the digitizing of image motion content that may be present in the picture. Choose from the Off, Low, Medium, or Strong setting.
VIZIO VO37L FHDTV20A User Manual Audio Menu 1. Press the button on the remote control and the Picture menu will be shown on the screen. 2. Press ! on the remote control to display the Audio Adjust menu. 3. Press # or " on the remote control to select an Audio menu option. 4. Once the menu option is highlighted, press $ or ! on the remote control to adjust the setting. 5. Press the LAST key once to return to the previous screen or repeatedly to return to your program if the task has been completed.
VIZIO VO37L FHDTV20A User Manual Analog Audio Out This option sets the volume control properties when using the RCA (white and red) connectors as audio line out to connect a Receiver/Amplifier/Home Theater system. Choose from Fixed or Variable. When set to Variable, volume from the external speakers will change according to the volume setting on the TV. If it is set to Fixed, the volume can only be changed by the settings on the external stereo system.
VIZIO VO37L FHDTV20A User Manual TV Menu When you first turned on your HDTV you set up your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV menu. 1. 2. 3. 4. 5. button on the remote control and the Picture menu will be shown on the screen. Press the Press ! on the remote control to display the TV menu. Press # or " on the remote control to select a TV menu option.
VIZIO VO37L FHDTV20A User Manual Time Zone Setting the correct Time Zone for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control. Daylight Saving Setting the daylight saving time for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control. Setup Menu 1. Press the button on the remote control and the Picture menu will be shown on the screen. 2.
VIZIO VO37L FHDTV20A User Manual Input Naming This feature helps you identify the input being watched. You can use up to 8 characters; either letters or numbers or combinations of both, to add a name that will make it easier for you to recognize the input. 1. Press " button to highlight this option. 2. Press ! button to obtain the next screen which shows the different inputs. 3. Press " button to select the desired input which you want to label or name (Examples: VCR, DVD, etc.
VIZIO VO37L FHDTV20A User Manual H/V Position To select the options in the H/V Position sub-menu, press the " button. A new menu will be displayed showing the following H/V Position settings: H-Position Adjust the horizontal position of the picture. V-Position Adjust the vertical position of the picture. H-SIZE Adjust the horizontal size of the picture. V-SIZE Adjust the vertical size of the picture.
VIZIO VO37L FHDTV20A User Manual US TV Rating Press the $II button to block (locked) or allow (unlocked) channels by the following US TV ratings: Y – All children Y7 – Older children G – General audience PG – Guidance suggested 14 – Strongly cautioned MA – Mature audience You can also customize the TV ratings for the following content: A – All sub-ratings D – Sexual dialog L – Adult language S – Sexual situations V - Violence FV – Fantasy violence US Movie Rating Note: When Rating Enable is OFF, US Movie
VIZIO VO37L FHDTV20A User Manual Canadian French Rating Note: When Rating Enable is OFF, Canadian French Rating adjustments are not available.
VIZIO VO37L FHDTV20A User Manual Understanding Viewing Features Your HDTV features the following viewing modes. You can switch viewing modes using the remote control, please follow the instructions on page 32. Viewing Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image. Standard TV broadcasts are displayed with a 4:3 Aspect Ratio. Movies in 4:3 Aspect Ratio may be referred to as pan-and-scan or full frame.
VIZIO VO37L FHDTV20A User Manual Chapter 5 Maintenance and Troubleshooting Maintenance Important 1. 2. Make sure that the power cable is removed from the socket before cleaning the TV. Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may damage the housing, screen glass and remote control, and cause paint to peel. Cleaning the Housing and Remote Control 1. 2. Use a soft cloth for cleaning.
VIZIO VO37L FHDTV20A User Manual Troubleshooting Guide If the TV fails or the performance changes dramatically, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the display still fails to perform as expected, contact the VIZIO for assistance by calling 1-877-MYVIZIO (6984946) or e-mail us at techsupport@vizio.com. General TV Problems Receive the error message “No Signal.” No power. No sound.
VIZIO VO37L FHDTV20A User Manual General TV Problems You cannot see a picture. Solution ! Standard, analog TV will always be noticeably inferior to HD because your digital flat panel TV has video that is many times better than old TV so you will see interference and deficiencies you did not know you had. ! Make sure the power button is ON (VIZIO logo glows white). ! Make sure AC power cord is securely connected to the AC socket.
VIZIO VO37L FHDTV20A User Manual General TV Problems Tips for Letterbox Content Users. Solution ! Best image quality will be achieved by HDMI. The next best is Component, followed by Composite. ! Due to variances in broadcast practices, it is possible some image distortions can occur. ! Some Letterboxed (or “Widescreen”) versions of DVD movies are formatted for standard 4:3 Televisions. Your HDTV has the ability to expand this content so the entire screen is filled at the expense of image accuracy.
VIZIO VO37L FHDTV20A User Manual Compliance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. USA Canada Germany UK Japan UL CSA VDE BASE/BS Electric Appliance Control Act FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
VIZIO VO37L FHDTV20A User Manual Chapter 6 Miscellaneous Information Specifications Specifications Panel 37” Diagonal, 16:9 Aspect Ratio Resolution 1920 x 1080 pixels Pixel (Dot) Pitch 0.42675(H) x 0.42675(V) Display Compatibility FHDTV (1080P) Colors 8 bit 16.7M Brightness cd/m2 (typical) 500nits Contrast Ratio TYP 2500:1 Contrast DCR 12500:1 Ratio with Response Time 6.
VIZIO VO37L FHDTV20A User Manual Power Input IEC Connector for direct power line connection Voltage Range 120 Vac at 50/60 Hz Power Consumption 103W (average) , <0.38W standby Environmental Conditions Operating Temperature: 5°C~35°C, Relative Humidity: 20~80%, Altitude: 0~14,000 ft Non-Operating Temperature: -20°C~60°C, Relative Humidity: 10~90%, Altitude: 0~40,000 ft Dimensions 36.27” x 25” x 8.6” with stand; 36.2” x 23.8” x 3.9” without stand Net Weight 36.
VIZIO VO37L FHDTV20A User Manual Limited Product Warranty VIZIO provides a “ONE-YEAR LIMITED WARRANTY” against manufacturing defects in materials and workmanship to the original purchaser of a new VIZIO display purchased from an authorized VIZIO U.S. reseller and used in the fifty (50) United States or Puerto Rico. VIZIO's Responsibility VIZIO displays purchased new from an authorized VIZIO U.S.
VIZIO VO37L FHDTV20A User Manual limited warranty. Installation, removal, transportation and reinstallation of a display, and routine maintenance and cleaning, are not covered by this limited warranty. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE.
VIZIO VO37L FHDTV20A User Manual customer will be provided with an on-site repair authorization number and on-site repair instructions. The determination for performing the on-site repair may be dependent upon the manufacturing defect and is at VIZIO's option and sole discretion. Proof of purchase is required to confirm the product is within the oneyear limited warranty period and meets the terms and conditions of the VIZIO Limited Product Warranty.
VIZIO VO37L FHDTV20A User Manual Index Accessories................................................................8 Adjustments Volume.................................................................11 Advanced Adjustments ............................................34 Antenna....................................................................16 Audio Menu Analog Audio Out adjustments.............................38 Audio Mode adjustments......................................37 Balance adjustments..........
VIZIO VO37L FHDTV20A User Manual Stereo Connecting ...........................................................24 S-Video ....................................................................16 Technical Support ....................................................49 Time Zone setting ....................................................40 Tint ...........................................................................35 Troubleshooting .......................................................
