VIZIO VOJ320M User Manual Dear VIZIO Customer, Congratulations on your new VIZIO VOJ320M television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO HDTV High Definition Television. For assistance, please call (877) 668-8462 or e-mail us at www.vizio.com.
VIZIO VOJ320M User Manual Important Safety Instructions Your HDTV is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your HDTV from being damaged, the following rules should be observed for the installation, use, and maintenance of your HDTV. Read the following safety instructions before operating your HDTV. Keep these instructions in a safe place for future reference.
VIZIO VOJ320M User Manual Do not overload power strips and extension cords. Overloading can result in fire or electric shock. The wall socket should be installed near your HDTV and easily accessible. Only power of the marked voltage can be used for your HDTV. Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
VIZIO VOJ320M User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
VIZIO VOJ320M User Manual Table of Contents Important Safety Instructions............................................................................................................................. 2 Television Antenna Connection Protection ....................................................................................................... 4 FCC Bulletin for New TV Owners......................................................................................................................
VIZIO VOJ320M User Manual Contrast ....................................................................................................................................................... 34 Color ............................................................................................................................................................ 35 Tint........................................................................................................................................................
VIZIO VOJ320M User Manual Opening the Package Your HDTV and its accompanying accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Once you have opened the carton, check that your HDTV is in good condition and that all of the contents are included. The glass surface can easily be scratched or broken, so handle your HDTV gently and never place your HDTV with the glass facing downwards on a surface without protective padding.
VIZIO VOJ320M User Manual TV Setup and Stand Assembly Note: We strongly recommend that two people perform the setup and assembly due to the weight and size of the TV. To unpack the TV and stand base: 1. Remove the remote control, batteries, and power cord from the foam end caps. 2. Remove the two top foam end caps. 3. Remove the stand base under foam end cap. 4. Remove the TV from the box and lay it face down on a clean, flat surface.
VIZIO VOJ320M User Manual Setting Up Your HDTV Read this user manual carefully before installing your HDTV. The power consumption of your HDTV is about 98W (AVG). Use the included power cord. When an extension cord is required, use one with the correct power rating. The cord must be grounded and the grounding feature must not be compromised. Your HDTV should be installed on a flat surface to avoid tipping.
VIZIO VOJ320M User Manual Chapter 1 Basic Controls and Connections Front Panel POWER ‘VIZIO’ LIGHT– The VIZIO name lights white when powered on and orange when powered off. REMOTE CONTROL SENSOR – Point the remote control directly at this window for the best response to the remote signal. Side Panel Controls POWER ( ) – Switch the HDTV on by pressing the button once. Press the button again to the HDTV off. MENU – This button activates the On Screen Display (OSD).
VIZIO VOJ320M User Manual Rear Panel Connections 1. HDMI 1 – Connect digital video devices such as DVD multimedia players or set top box through this all digital connector. There is an additional HDMI port on the side of the TV. 2. RGB PC – Connect the video and audio from a computer here. A cable with a 1/8” mini plug stereo connector at the end connecting to the TV is needed if sound is also transmitted with this signal. 3.
VIZIO VOJ320M User Manual Right-Side Panel Connection 1. AV2 – Connect the secondary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source, and then use the yellow connector to connect the external video from the same source. Note: The red and white audio connectors are shared between AV2 and COMPONENT2. 2.
VIZIO VOJ320M User Manual VIZIO Remote Control GUIDE – This button displays program information. POWER ( ) – Press this button to turn the TV on from the Standby mode. Press it again to return to the Standby mode. TV – Press this button to select TV. AV – Press this button to select AV1 and AV2 (either Composite or S-Video) input. COMP – Press this button to select Component 1 and Component 2 inputs. HDMI – Press this button to select the HDMI input.
VIZIO VOJ320M User Manual Insertion of Batteries in the Remote Control Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover. Precautionary Tips for Inserting the Batteries: Only use the specified AA batteries. Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.
VIZIO VOJ320M User Manual Chapter 2 Connecting Equipment Which Video Connection Should I Use? The VIZIO HDTV has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays. Connection Quality (type) Connector Description Best (digital) HDMI provides an interface between any audio/video source, such as a set-top box, DVD player, or A/V receiver and a digital television (DTV), over a single cable.
VIZIO VOJ320M User Manual Connecting Your Cable or Satellite Box You have four options for connecting your cable or satellite box to your HDTV: HDMI, Component, Composite, or Coax (RF). Based on your home theater configuration, you can decide which option is the right one for you. Refer to your set-top box user manual for more information about the video output requirements or consult your cable or satellite operator.
VIZIO VOJ320M User Manual HDMI Connections for Cable or Satellite Boxes with DVI SET TOP BOX 1. 2. 3. 4. 5. Turn off the power to the HDTV and HDTV Set-Top Box. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI 2 input at the rear of the HDTV.
VIZIO VOJ320M User Manual Using S-Video (Compatible) SET TOP BOX 1. Turn off your HDTV and set-top box. 2. Connect the S-VIDEO cable from your set-top box to the S-VIDEO jack on the back of your HDTV. 3. Connect the audio cables (white and red) on your set-top box to the corresponding L and R AUDIO jacks on the back of your HDTV. 4. Turn on your HDTV and set-top box. 5. Press AV on the remote control to view the content. You can also press INPUT on the remote control.
VIZIO VOJ320M User Manual Connecting Coaxial (RF) Using Your Antenna or Digital Cable for Standard TV or Digital TV) CABLE BOX 1. 2. 3. 4. Turn off the power to the HDTV. Connect the coaxial (RF) connector from your antenna or cable to the DTV/TV CABLE/ANTENNA connector at the rear of the HDTV Turn on the power to the HDTV. Select TV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control. Using the Antenna or Cable through Your VCR VCR 1.
VIZIO VOJ320M User Manual Connecting Your DVD Player You have several options for connecting your DVD player to your HDTV: HDMI, Component, S-Video and Composite (AV) inputs. Based on your home theater configuration, you can decide which option is the right one for you. Using HDMI (Best) For optimal results, DVD players that have a digital interface such as HDMI should be connected to the HDMI input on your HDTV. CD DVD 1. 2. Turn off your HDTV and DVD player.
VIZIO VOJ320M User Manual Using Component Video (Good) CD DVD 1. 2. 3. 4. 5. Turn off the power to the HDTV and DVD player. Connect the component cable (green, blue, and red) from your DVD player to an available set of COMPONENT jacks on the back or side of your HDTV. Connect the audio cables (white and red) from your DVD player to the COMPONENT L and R AUDIO jacks on the back or side of your HDTV. Turn on the power to the HDTV and DVD player.
VIZIO VOJ320M User Manual Using Composite (AV) Video (Compatible) CD DVD 1. 2. 3. 4. 5. Turn off the power to the HDTV and DVD player. Connect the Video cable (yellow) from your DVD player to the S-VIDEO/AV1 jack on the back of your HDTV. Connect the audio cables (white and red) on your DVD player to the S-VIDEO/AV1 L and R AUDIO jacks on the back of your HDTV. Turn on the power to the HDTV and DVD Player.
VIZIO VOJ320M User Manual Connecting an External Receiver/Amp STEREO SYSTEM 1. 2. 3. Turn off the power to the HDTV and Receiver/Amp. Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the AUDIO OUT audio connectors at the rear of the HDTV. Turn on the power to the HDTV and Receiver/Amp. 4. Then press the button on the remote control to open the OnScreen Display (OSD) menu. 5.
VIZIO VOJ320M User Manual Connecting a Computer COMPUTER 1. 2. 3. 4. 5. Turn off the power to the HDTV and Computer. Connect the VGA cable from your computer to the RGB PC jack on the back of your HDTV. Connect the 1/8-inch audio cable from your computer to the RGB PC Audio jack on the back of your HDTV. This step is optional and only needed if you want to transmit audio from the Computer through the TV. Turn on the power to the HDTV and Computer.
VIZIO VOJ320M User Manual Preset PC Resolutions If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1920x1080 at 60Hz for better picture quality (refer to the graphic card’s user guide for questions on how to set this timing mode). See the table below for the factory preset resolutions. Also see Resolution through RGB Input chart below for the best resolution available through RGB PC input when video card supports 1920x1080 resolution. Vert Refresh Horiz Sync Pixel Horiz.
VIZIO VOJ320M User Manual Chapter 3 Using your HDTV the first time Setup Wizard 1. Connect the Power Cable Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an AC wall socket. 2. Connect Audio and Video Cables to the HDTV (see Chapter 2 for detailed steps) 3. Turn Power On Once all the components are connected, press the Power ON button on the side of the HDTV, or on the remote control. 4.
VIZIO VOJ320M User Manual Note: At this point, if a set-top box from your cable or satellite service company is being used, press the LAST button on the remote control and skip to select input source in the next section. Otherwise continue with next step: a. The Tuner screen will be displayed. If you are using Cable Service (with no box), press the ▼ button on the remote control to choose CABLE. button on the remote to Press the go to the next screen. b.
VIZIO VOJ320M User Manual Select Input Source Select the Input Source for the HDTV by pressing the INPUT button on the side of the TV or using the Input button on the remote control. Pressing this button will cycle you through the following options: TV, AV1, AV2, Component1, Component2, RGB, HDMI 1, HDMI 2, and HDMI3. Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see a picture on your HDTV.
VIZIO VOJ320M User Manual Fine Tuning the picture 1. Press the button to bring up the Menu display. The Picture Menu to select it. Use the ▲ or ▼ buttons to scroll is highlighted. Press to the Advanced Video option. 2. Press the ► button to select it. 3. Use either ▲ or ▼ to scroll to the Color Temperature option. 4. Press the ► button to select it. 5. Press either ◄ or ► to change setting to Normal, and then press the LAST button repeatedly until the Picture Mode is displayed. 6.
VIZIO VOJ320M User Manual Watching a TV Program Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. 1. Press the power button on the remote or on the side of the HDTV. The VIZIO logo on the front will change from orange to white. 2. There are 3 options for selecting your programming: a.
VIZIO VOJ320M User Manual Adjusting Basic HDTV Settings Volume To adjust the volume, press and hold the VOL+ or VOL- button on the side of the HDTV or remote control until the desired level is reached. TV Channels To step up or down through the available TV channels, press the CH ▲ or ▼ button on the side of the HDTV or remote control once for the next or previous channel, or hold it depressed until the desired channel is reached. Note: Channel up and down will only operate in TV mode.
VIZIO VOJ320M User Manual Program Information When watching a digital TV program, the On Screen Display will function as follows: When a channel is selected, an information header is shown over the picture for a few seconds. When you press the GUIDE button on the remote, the information header and a short summary of the program content, when available from the broadcaster, is displayed.
VIZIO VOJ320M User Manual Chapter 4 Advanced Adjustment of HDTV Using the On Screen Display (OSD) The remote control or the control buttons on the left hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust contrast, brightness and other settings. The TV will save changes made to the settings, even if the TV is turned off. The OSD consists of several menu options: Picture, Audio Mode, TV, and Setup.
VIZIO VOJ320M User Manual Picture Menu 1. Press the button on the remote control or the side of the TV and the Picture menu will be shown on the screen. 2. Press either ▲ or ▼ on the remote control or CH ▲ or CH ▼ on the side of the HDTV to select a Picture menu option. 3. Once the menu option is highlighted, press either ◄ or ► on the remote control or VOL + or VOL –on the side of the HDTV to adjust the setting. 4.
VIZIO VOJ320M User Manual Color Color adjusts the amount of color in the picture. Tint The Tint adjusts the hue of the picture. The easiest way to set tint is to look at flesh tones and adjust for a realistic appearance. In most cases, the default middle position is correct. If people’s faces look too orange try reducing the level of color first. Sharpness The Sharpness adjustment adjusts the sharpness of the edges of elements in the picture. It does not produce detail that otherwise does not exist.
VIZIO VOJ320M User Manual Film Mode Choose from Auto or Off. When set to Auto, the TV will detect the cadence (for example at 24 frames/second for film, or normal video at 60 fps). When set to Off it will stay at 60 fps. Reset Picture Mode Return all Picture settings to factory default. A screen will come up to confirm your selection or to cancel it. Press either ◄ or ► to make the selection, and then press Note: Only settings under the Picture menu will be reset. 36 www.VIZIO.com to accept it.
VIZIO VOJ320M User Manual Audio Menu 1. Press the button on the remote control or the side of the TV and the Picture menu will be shown on the screen. 2. Press either ▲ or ▼ on the remote control or CH ▲ or CH ▼ on the side of the HDTV to highlight the Audio menu option. button to select the options in the Audio menu. 3. Press the 4. Press either ▲ or ▼ on the remote control or CH ▲ or CH ▼ on the side of the HDTV to select an Audio menu option. 5.
VIZIO VOJ320M User Manual Digital Audio Out This option allows selection of the type of processing for the SPDIF (Optical connector) when used with a Receiver/Amplifier/Home Theater system. Select to choose from OFF, Dolby Digital or PCM. Speakers Turn the internal speakers On or Off. You may want to turn the internal speakers off when listening to the audio through your Home Theater System.
VIZIO VOJ320M User Manual TV Menu When you first turned on your HDTV you set up your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV menu. 1. Press the button on the remote control or the side of the TV and the Picture menu will be shown on the screen. 2. Press either ▲ or ▼ on the remote control or CH ▲ or CH ▼ on the side of the HDTV to highlight the TV menu option. button to select the options in the TV menu. 3.
VIZIO VOJ320M User Manual Time Zone Setting the correct Time Zone for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control. Daylight Saving Setting the daylight saving time for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control.
VIZIO VOJ320M User Manual Input Naming This feature helps you identify the input being watched. You can use up to 8 characters; either letters or numbers or combinations of both, to add a name that will make it easier for you to recognize the input. 1. Press the ► button to go to the next screen that shows the different inputs. 2. Press the ▼ button to select the desired input which you want to label. button to go to the first 3. Press the space in the bracket. 4.
VIZIO VOJ320M User Manual H/V Position To select the options in the H/V Position sub-menu, press the button or the ► button. A new menu will be displayed showing the following H/V Position settings: H-Position Adjust the horizontal position of the picture. V-Position Adjust the vertical position of the picture. H-SIZE Adjust the horizontal size of the picture. V-SIZE Adjust the vertical size of the picture.
VIZIO VOJ320M User Manual Parental If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV. To select the options in the Parental sub-menu, press the button or the ► button. Enter a password to access the Parental menu. The default password set in the factory is 0 0 0 0.
VIZIO VOJ320M User Manual US Movie Rating Press the button to block (locked) or allow (unlocked) channels by the following US Movie ratings: G – General audience PG – Parental guidance suggested PG-13 – Recommended for children 13 years of age or older R – Mature audience NC-17 – No one under 17 years of age X – No one under 17 years of age Canadian English Rating Press the button to block (locked) or allow (unlocked) channels by the following Canadian English ratings: C – Children C8+ – Children 8 years
VIZIO VOJ320M User Manual Change the Password Select Access Code Edit to enter a new, 4-digit password using the number buttons on the remote. Enter it a second time to confirm you entered it correctly. Note: Make sure you write down and store the new password in a secure place. The System Reset feature (see page 53) does NOT reset the password. System Info Display the technical information including model name, version and revision of firmware, source type, and resolution.
VIZIO VOJ320M User Manual Understanding Viewing Features Your HDTV features the following viewing modes. You can switch viewing modes using the remote control, please follow the instructions on page 31. Viewing Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image. Standard TV broadcasts are displayed with a 4:3 Aspect Ratio. Movies in 4:3 Aspect Ratio may be referred to as pan-and-scan or full frame.
VIZIO VOJ320M User Manual Chapter 5 Maintenance and Troubleshooting Maintenance Important 1. 2. Make sure that the power cable is removed from the socket before cleaning the TV. Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may damage the housing, screen glass and remote control, and cause paint to peel. Cleaning the Housing and Remote Control 1. 2. Use a soft cloth for cleaning.
VIZIO VOJ320M User Manual Troubleshooting Guide If the TV fails or the performance changes dramatically, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the display still fails to perform as expected, contact the VIZIO for assistance by calling 1-877-MYVIZIO (6984946) or e-mail us at techsupport@vizio.com. Problem Solution No power. Make sure the power button is ON (White VIZIO Logo).
VIZIO VOJ320M User Manual The display image does not cover the entire screen. If you are using RGB mode, make sure that H Size and V Position in the On Screen Display (OSD) are set correctly. If you are using TV, AV-C (Composite), AV-S (S-Video) or Component with 480i input, follow instructions on page 25 to obtain the desired screen mode. You can see a picture but you cannot hear sound. Make sure that the volume is not turned down. Make sure that the sound is not muted.
VIZIO VOJ320M User Manual Telephone & Technical Support Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone. For more information on warranty service or repair, after the warranty period, please contact our Support Department at the number below.
VIZIO VOJ320M User Manual Compliance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. USA Canada Germany UK Japan UL CSA VDE BASE/BS Electric Appliance Control Act FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
VIZIO VOJ320M User Manual Chapter 6 Miscellaneous Information Specifications Specifications Panel 32” Diagonal, 16:9 Aspect Ratio Resolution 1920 x 1080 pixels Pixel (Dot) Pitch 0.36375mm(H) x 0.36375mm(V) Display Compatibility FHDTV (1080P) Colors 1.06 Billion Brightness cd/m2 (typical) 500nits Contrast 1300:1 Contrast Ratio w/DCR 50,000:1 Response Time 6.
VIZIO VOJ320M User Manual Dimensions 31.57"W x 22.39"H x 8.59"D with stand; 31.57"W x 21.13"H x 4.11”D without stand Net Weight 22.05 lbs without stand, 23.15 lbs with stand Gross Weight 30.86 lbs Certifications CSA, CSA-US, FCC Class B, BETS-7 Compliances Energy Star 3.0. ATSC Spec A/65, EIA/CEA-766-A *Product specifications may change without notice or obligation.
VIZIO VOJ320M User Manual Limited Product Warranty VIZIO provides a “ONE-YEAR LIMITED WARRANTY” against manufacturing defects in materials and workmanship to the original purchaser of a new VIZIO display purchased from an authorized VIZIO U.S. reseller and used in the fifty (50) United States or Puerto Rico. VIZIO's Responsibility VIZIO displays purchased new from an authorized VIZIO U.S.
VIZIO VOJ320M User Manual screen for extended periods and or excessive brightness and contrast levels, is not covered by this limited warranty. Installation, removal, transportation and reinstallation of a display, and routine maintenance and cleaning, are not covered by this limited warranty. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE.
VIZIO VOJ320M User Manual If VIZIO Technical Support determines that a problem with a display unit may be within the terms and conditions of the VIZIO Limited Product Warranty and that an on-site repair may be performed, the customer will be provided with an on-site repair authorization number and on-site repair instructions. The determination for performing the on-site repair may be dependent upon the manufacturing defect and is at VIZIO's option and sole discretion.
VIZIO VOJ320M User Manual Index Accessories ........................................................7 Adjustments Selecting the Screen Size ......................46, 53 Stepping through TV Channels ....................31 Volume..............................................10, 31, 48 Advanced Adaptive Luma ................................35 Advanced Adjustments ....................................33 Advanced Video adjustments ..........................35 Audio adjustments....................................
VIZIO VOJ320M User Manual Skip Channel ................................................39 Tuner Mode adjustments..............................39 TV Menu Adjustments......................................39 Using the On Screen Display ...........................33 Viewing Modes.................................................46 Wall mounting ....................................................9 Warranty...........................................................54 Warranty services ...........................