VIZIO QUICK START GUIDE Model: VSB207BT
IMPORTANT SAFETY INSTRUCTIONS Your Sound Bar is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Sound Bar from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Sound Bar. Keep these instructions in a safe place for future reference. literature accompanying your Sound Bar.
WARNING DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just two (2) hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
PACKAGE CONTENTS Sub - Input High Definition Sound Bar Sub + DTS Remote Control with Battery VIZIO Quick Start Guide Model: VSB207BT Power Adapter w/Cable This Quick Start Guide Stereo RCA to 3.
CONTROLS & CONNECTIONS Power Press to turn Sound Bar on or off. Input Press to change input source (Input 1, Input 2, etc.). Bluetooth Press for direct access to Bluetooth input Hold to pair Bluetooth source. Volume + / Press to increase/ decrease system volume. V Input 2 (Stereo 3.5mm) V Power Port Service Port For use only by service technician.
DISPLAY PANEL The Display Panel on the front of the Sound Bar has Indicator Lights that provide information about the functionality of the Sound Bar.
FIRST-TIME SETUP 1 V BACK OF SOUND BAR BEST CHOOSE ONE GOOD GOOD Connect one of the included cables to ONE TV audio output as shown.** AUDIO OUT AUDIO OUT AUDIO OUT BACK OF YOUR TV* *Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
2 V V 3 4
Sound Bar is centered below the TV. For the best surround sound experience, position the Sound Bar as shown. The Sound Bar should be close to ear level.
Power Gently pull the plastic tab from the back of the remote control. (The plastic tab can be thrown away) Sub - Sub + Turn your TV on, then press the Power button on the remote to turn the Sound Bar on. Press the Input button to switch between audio sources. For example, if you connected your TV to Input 1, set the Sound Bar to Input 1. Setup is complete.
USING THE REMOTE Power Press to turn on or off. Volume Up Press to increase volume. Mute Press to mute/unmute. Sub Press to decrease subwoofer volume.* Sub + Press to increase subwoofer volume.* Sub - Sub + Fast-Rewind/Back Press and hold to fast rewind. Press to return to previous track.** Play/Pause Press to Play or Pause. Input Press to change input source. For best results, point the remote at the right side of the Sound Bar. The sensor is located there.
BLUETOOTH PAIRING To pair the Sound Bar with a Bluetooth device: 1. Make sure your Bluetooth device is in discovery mode. For more information, see the documentation that came with your device. 2. Press and hold the Bluetooth button on the Sound Bar for five (5) seconds. When the Sound Bar is in Bluetooth Pairing Mode, the Indicator Lights on the Display Panel on the front of the Sound Bar will light sequentially from left to right and back again.
USING BLUETOOTH MODE Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your device’s documentation for more information. Once you have paired your source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain paired, even if you change the input on the Sound Bar.
CHANGING THE INPUT SOURCE You can connect up to 4 devices to your Sound Bar at once. To switch between the sources, press the Input button on the Sound Bar or the remote until the source you wish to use is selected. The Indicator Lights on the display panel will illuminate to show which input source has been selected. Input Lights RCA 3.5mm Optical* Bluetooth *In order for the Optical Input to decode sound, the source output must be set to PCM.
CHANGING THE BATTERY 1 Insert a flat-head screwdriver into the slot as shown. Gently push down on the tab, then press and pull downward on the battery cover to open. 2 Replace the old battery with a new CR2032. Be sure that the + sign on the battery is facing up. Push the battery cover until it clicks back into place.
CONNECTING A SUBWOOFER 1 V BACK OF SOUND BAR TURN BOTH SOUND BAR AND SUBWOOFER OFF. CONNECT AN RCA CABLE* TO YOUR SUBWOOFER*. The volume on your Subwoofer must be manually adjusted. See your Subwoofer’s user manual for details on proper operation.
WALL MOUNTING THE SOUND BAR 1 Remove the screw from the Sound Bar stands and rotate as shown. 26 3/4” (67.95 cm) sure your screws are attached to wood 2 Be studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls). Wall mounting hardware is not included. If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer. Reattach stands using the included screw.
HELP & TROUBLESHOOTING All VIZIO products include FREE lifetime technical support. The VIZIO support team is highly trained and is based in the United States. We can help with: • Product Setup • Technical Problems • Warranty Questions • And More Hours of operation: Monday - Friday: 5 AM TO 9 PM (PST) Saturday - Sunday: 8 AM TO 4 PM (PST) There is no power. There is no sound. I hear buzzing or humming. Phone: (877) 698-4946 (TOLL-FREE) Email: techsupport@VIZIO.com Web: www.VIZIO.
The remote isn’t working. • Make sure the plastic tab has been removed from the battery compartment. • Replace the remote battery with a new one. • Point the remote directly at the Sound Bar when pressing a button. • If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application. (e.g., a music streaming app may not support the Back/Fast Rewind button.) The audio is distorted in Bluetooth mode. • Move the source device closer to the Sound Bar.
ONE-YEAR LIMITED WARRANTY ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.
LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
VIZIO RECOMMENDS THE ULTIMATE ULTRABOOK™ 14” THIN+LIGHT With uncompromising performance, and premium picture and audio quality in a remarkably thin profile, the VIZIO Thin+Light is the Ultrabook that’s impossible to ignore. Ultra-responsive and ultra-portable, the VIZIO Thin+Light boots up instantly and goes wherever you do. If good things come in small packages, this must be the best there is. Available at www.VIZIO.
VIZIO RECOMMENDS The VIZIO Co-Star™ Stream Player merges live TV and streaming entertainment into one experience, turning any HDTV into the ultimate smart TV. Using the latest version of Google TV™, Co-Star decks out your existing HDTV with apps, full-screen Web browsing and the best in streaming entertainment. And with 1080p Full HD resolution, built-in Wi-Fi, and 3D-readiness, VIZIO Co-Star is the ultimate entertainment upgrade for any high-definition television. Available at www.VIZIO.
© 2013 VIZIO INC. ALL RIGHTS RESERVED.
