VlZlO VU32L HDTV10A User Manual Dear VlZlO Customer, Congratulations on your new VlZlO VU32L HDTVl0A High Definition LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VlZlO VU32L HDTVl0A High Definition Television. For assistance, please call (877)-698-4946 mail us at techsupport@vizio.com.
VlZlOVU32LHDTV10A UserManual THIS PRODUCT HAS BEEN DESIGNED AND TESTED FOR COMPLIANCE WITH REGULATORY SAFETY CERTIFICATIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display.
VlZIOVU32LHDTVl0AUserManual External TeLevision Rn_enna Groondinq If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
VlZlO VU32L HDTV10A User Manual Openimq the Packaqe Your VlZlO VU32L HDTVl0A and accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that the VU32L HDTVl 0A is in good condition and that all of the accessories are included. The VU32L HDTVl0A unpacking the HDTV.
VlZIO VU32L HDTVl0A Additional Certifiied VU38L HDTVloA are Accessories sold sepamateb7 ffor the User Manual VI210 Wall Mounts High Definition Cables Extra or replacement Remote VlZlO also offers Installation Services and Extended Warranty Services for your VlZlO VU32L HDTVl0A To purchase or inquire about additional accessories and services for your VlZlO product, visit our web site at www.VlZlO.
VlZIOVU32LHDTVl0AUserManual mreparJnq To remove 1. 2. Your LCD the stand HDTV ffor Wall Mountinq base Unplug all of the cables and cords from your VU32L HDTV10A. Place the VU32L HDTVl0A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV. 3. Push up the plastic panel on the back of the stand and lift it away once to release. 4. Remove the eight (8) screws that were hidden by the panel, while holding the base. 5. Carefully remove the stand base.
VlZIOVU32LHDTVl0AUserManual Tabke off Contenbs Chapter i Basle Controts and Connections ................................................................. 1.1 Front Panel .......................................................................................................................................................... 1.2 Side Panel Controls ............................................................................................................................................. 1.
VlZlOVU32LHDTV10A UserManual 4.4.2 Auto Search ............................................................................................................................................... 46 4.4.3 Partial Channel Search .............................................................................................................................. 47 4.4.4 Skip Channel ...........................................................................................................................................
VlZIO VU32L HDTVl0A Chapter 1 Pronb Basic ControLs and User Manual Connections Panel POWER 'VIZlO' LIGHT- The VlZlO name lights white when powered on and orange when powered off.
VlZlOVU32LHDTV10A UserManual Ream manet Connections I I I I I _® . SERVICE - This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service will void the manufacturer's warranty of this equipment. . HDMI 1 - Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector.
VlZlO VU32L HDTV10A User Manual Riqht-Side Pane[ Connection 1. HEADPHONE - Connect your headphone here for personalized listening without disturbing others. 2. AV2 - Connect the secondary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source, then use the yellow connector to connect the external video from the same source. The orange color band on the side of the TV indicates this connection.
VlZlOVU32LHDTV10A UserManual WI2 O Remote Control GUIDE - This button displays program information. Press this button once and the information of the program being viewed is shown. Press it a second time and the Electronic Programming Guide will appear in the screen. POWER - Press this button to turn the TV on from the Standby mode. Standby mode. TV - Press this button to select TV. Press it again to return to the AV - Press this button to select the Audio Video input.
VlZlO VU32L HDTV10A User Manual 1,5._ Insertion off Batteries in the Remote Control Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover. Precautionary Tips for Inserting the Batteries: Only use the specified AA batteries. Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.
VlZIO VU32L HDTV10A User Manual Chapter a°l 2 Which The VlZlO connection Connectinq Uideo Equipment Conneabi©n ShouLd VU32L HDTVl0A has six different ways to the most advanced for digital displays. Best (digital) White Best (digital) Black Good (analog) Good (analog) video equipment from a basic HDMI (High-Definition Multimedia Interface) - It is the first and only industry-supported, uncompressed, all-digital audio/video interface.
VlZlO VU32L HDTV10A User Manual sos Connectinq aoa01 , 2. . 4. Usinq . , 4. (RF) Antenna or OiqitaL Cable for OTV Turn off the power to the HDTV. Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA connector on the rear of the HDTV. Turn on the power to the HDTV. Select DTV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control.
VlZIOVU32LHDTV10A UserManual a03 Connectinq a°3°£ Us_nq Your HDN_ HDTY Set-Top Box input HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results. Connectinq . 2. , 4. your HDTV Set-Top Box {Best]: Turn off the power to the HDTV and HDTV Set-Top Box. Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to the HDMI Input (white color area) at the rear of the HDTV.
VlZlOVU32LHDTV10A UserManual Fore HDTV , SetoTOp Boxes with Oq_: Turn off the power to the HDTV and HDTV Set-Top Box, 2. Using a HDMI-DVl cable, connect the DVl end to your HDTV Set-Top Box and the HDMI end to the HDMI 2 Input (white color area) at the rear of the HDTV.
VlZIO VU32L HDTV10A User Manual 2,3°2 Usinq Connectinq Component your HOTV Video SetoTop Box {Better}: Iq{,_ , Turn off the power to the HDTV and HDTV Set-Top Box. 2. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y (green color) connector in the Component1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV. .
VlZIOVU32LHDTVIOAUserManual s4 ConnectJnq 34.1 Usioq Your Composite Basic SebTop Video I. Turn off the power to the HDTV and Set-Top Box. 2. Using Video the AV Cable, connect (yellow color) connector the on your Set-Top Box to the (yellow color) connector in the area) at the rear of the HDTV. . . 5. 3.4.
VlZlOVU32LHDTV10A UserManual 2°5 Connecbinq Your OgD Prayer You have several options for connecting your DVD player to your VU32L HDTVIOA; HDMI, Component, AV (S-Video or Composite) inputs. Based on your configuration, you can decide which option is right for you. 2oSo£ Usinq HDMI Inpub DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the VlZlO VU32L HDTVl0A for optimal results. . 2. . 4.
VlZlOVU32LHDTV10A UserManual For DVD Players with DVI: 1. Turn off the HDTV and DVD player. 2. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI2 end to the HDMI Input (white color area) at the rear of the HDTV. 3. Connect an audio cable (white and red connectors) to the audio output connectors associated with the DVl output of the DVD player and connect the other end to the audio connectors by the HDMI input (white area) at the rear of the HDTV. . 5.
VlZIOVU32LHDTV10A UserManual 2,,S°2 Usinq Component Connectinq your OVO Video Ptaver (Setter]: I. Turn off the power to the HDTV and DVD player. 2. Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component1 input (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV. .
VlZlOVU32LHDTVIOAUserManual 2°5°3 Usinq Connectinq . 2. S,oVideo your DUD Player (Good:}: Turn off the power to the HDTV and DVD player. Connect the S-Video jack on the player to the S-Video jack in the (yellow/red area) at the rear of rear of your AV/SNIDEO the HDTV. Connect an audio cable (white and red connectors) to the audio output connectors associated with the S-Video output on your DVD player and connect the other end to the audio connectors (yellow/red area) at the rear of the HDTV.
VlZIOVU32LHDTVl0AUserManual Connectlnq VouF VCR oF Video Csmera Turn off the HDTV and VCR or Video Camera. I. 2. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the AV input (yellow/red area) at the rear of the HDTV. 3.
VlZIOVU32LHDTV10A UserManual Eonnectinq . 2. . 4. . an external Receiver/Amp Turn off the power to the LCD HDTV and Receiver/Amp. Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white area) audio connectors at the rear of the LCD HDTV. Turn on the power to the LCD HDTV and Receiver/Amp. Then press the MENU button on the remote control to open the OnScreen Display (OSD) menu.
VlZlOVU32LHDTV10A UserManual 2..7..£ 0p 88l Ou pu off Rudio eoeiued If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO OUT (white area) at the rear of the VU32L HDTV10A. 1. Turn off the power to the LCD HDTV and 2. Using an SPDIF cable, connect the cable to the audio input connector on the Receiver/Amp and connect the other end to the OPTICAL OUT (white area) audio connectors at the rear of the LCD HDTV. 3.
VlZlOVU32LHDTV10A UserManual 2.8 Commeotimq . a PC Computer Turn off the power to the HDTV and PC Computer. 2. Connect a 15@in D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (blue area) at the rear of the HDTV. 3. Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the rear of the HDTV. 4. Turn on the HDTV and PC Computer. 5. Select RGB using the INPUT button on the remote or side of the HDTV.
VlZlOVU32LHDTV10A UserManual 2,,8,,_ Pmeset PC Resokut_ons If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1366x768 at 60Hz for best picture quality (refer to the graphic card's user guide for questions on how to set this timing mode), Please see the table below for the factory preset resolutions, 640x480 60 31,5 59,94 N N 25,175 640x480 75 37,5 75 N N 31,5 800x600 60 37,9 60.317 P P 40 800x600 72 48.
VlZIOVU32LHDTVl0AUserManual Chapter 3 Se inq Up to Watch TeLevision For 'Preparing Your LCD HDTV for Wall Mounting', see page 6. 3os 1. 2. Basic LCD Start HDTV Up Connecting the Power Cable Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an AC wall socket. Connect Audio and Video Cables to the HDTV (see pages 14 ~ 28 for detailed steps) 3.
VlZlOVU32LHDTV10A UserManual b. TheChannelScanscreenwill bedisplayed; defaultchoiceis Scan. Pressthe_ buttonontheremote controlto commence thesearchfor availablechannelstobestoredinto memory. Ifyoudonotwantto scanfor channelsatthistime,pressthe 4_ buttonontheremotetohighlight SkipScanandthenpressthe button.
VlZIO VU32L HDTVl0A C. User Manual The screen will now change to show the progress of the search for Analog (NTSC) and Digital (ATSC) channels. No_e:DTVdg a boadcas s _o/:avaabe na aeas Reler owww.antennaweb.orq olte _1o _ao'_ aboJ avaab /:y_ youraea ypeofa en_aa_d _ w_c_ dec ontopot/:yo_ a_e_a.
VlZlO VU32L HDTV10A User Manual a. Select the correct input connection; RF (DTV/TV) connector, Composite (Yellow, Red and White) connectors, Component (Red, Green, Blue plus Red and White) connectors, HDMI connectors or Separate-Video (S-Video) plus Red and White connectors (if applicable). Make the physical connection or hook up. b. If you have an HD service you must use the HDMI (best) or Component connection. Note: Composite (AV) and S-Video Cables can only be used for SD (480i) pictures. c.
VlZlO VU32L HDTV10A User Manual d. Press the _ button to select it. e. Press either D or _ button to change setting to Normal, and then press the LAST key again to go back to previous screen. f. Press either _ or_button to select the Picture Mode option. g. Press either D or _ button to change the Picture Mode option to Standard. h. Press the LAST key to exit the on screen display Menu.
VlZlOVU32LHDTV10A UserManual 3°2 Watchinq 8 TV Pr©qram Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. . 2. . Press the power button on the remote or on the side of the HDTV. front will change from orange to white. The VlZlO logo on the There are 3 options for selecting your programming: a.
VlZIO VU32L HDTV10A User Manual 3°3 Rdoustioq Basio HDT Settimqs Volume To increase the volume, press and hold the VOL+ or VOL- button on the side of the LCD HDTV or remote control until the desired level is reached. (b MENU TV Channels CH + To step up or down through the available TV channels, press the CH+ or CH- button on the side of the HDTV or remote control once for the next or previous channel, or hold it depressed until the desired channel is reached.
VlZlOVU32LHDTVIOAUserManual 3.4 Proqram Information Press the GUIDE button twice on the remote and program information for the channel you are watching will be displayed on the screen. Press the i or _ button to scroll up or down the channels. Each time you pause at a channel, the program list-will upaate with the program schedule for the channel and the window will show the live program for that channel. Press the GUIDE button to exit this feature. 3.
VlZIOVU32LHDTV10A UserManual Chapter Usinq 4 Rdvanced the On Rd]ustment Soreen DispLay off HDTW [OSD} The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and other settings. The TV will save changes made to the settings, even if the TV is turned off. The OSD consists of several menu options: Picture Adjust, Audio Adjust, Setup and TV Tuner Setup.
VlZIOVU32LHDTV10A UserManual 4o2,,1 Picture Mode When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the _ button to highlight the Picture Mode selection. Use the D or _ and Baseball, button to choose from Custom, Standard, Movie, Game, Vivid, Football, Golf, Basketball Picture Adjustments are available them to your preferred settings. for you to set Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
VlZlO VU32L HDTV10A User Manual 4°3°3 Briqhbness Press the _ button to highlight the Brightness selection. Press the _ button to start adjusting the brightness and the menu page will disappear and be replaced by a small Brightness Indicator Bar so you can see the brightness level between the minimum and maximum available levels. Use the D or _ button to adjust the level. The Brightness adjusts the black levels in the picture.
VlZlOVU32LHDTV10A UserManual 4os.5 Tint Press the _ button to highlight the Tint selection. Press the _ button to start adjusting the tint and the menu page will disappear and be replaced by a small Tint Indicator Bar so you can see the tint adjustment to the left or right of the nominal position. Use the D or _ button to adjust the level. The Tint adjusts the hue of the picture. The easiest way to set tint is to look at flesh tones and adjust for a realistic appearance.
VlZlO VU32L HDTV10A User Manual Color Enhancement Press the _ button to highlight Smart Color Enhancement. reproduction performance of the picture. Press the D or _ Use this feature to increase the picture button to choose from Off, Normal, Rich Color, Green/Flesh and Green/Blue setting. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Advanced Adaptive Luma Press the _ button to highlight Advanced Adaptive Luma.
VlZlO VU32L HDTV10A User Manual 4o2,q Reset Plctume Mode Press the button to highlight the option for Reset Picture Mode selection Press _ button to return on Picture settings to factory default. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. y • _1 ) fi'J_ i{}Cii @f: 8_ i<: sb',i, iii i1_ ::_:;:ii Version 3/28/2008 42 www.VlZlO.
VlZIOVU32LHDTV10A UserManual 4.3 DTV 4°3°i / TV Rudio Input Rudio Rdgustment Node When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the _ ADJUST page. Press the _ selection. button to display the AUDIO button to highlight the Audio Mode Use the D or _ button to choose from Flat, Rock, Pop, Classic or Jazz. Equalizer adjustments are available for you to set them to your preferred settings.
VlZlOVU32LHDTVIOAUserManual 4.3.3 8818moe Press the _ button to highlight the Balance selection. Press the _ button to start adjusting the balance and the menu page will disappear and be replaced by a small Balance Indicator Bar, as before, so you can see the balance adjustment to the left or right of the nominal position. Use the D or _ button to adjust the left/right balance. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
VlZlOVU32LHDTV10A UserManual Presseither D or _ buttonto turn the audioout signalto Fixedor Variable.Whenit is setto variable,volumefromtheexternalspeakerswillchangeaccordingtothevolumesettingontheTV. If it is fixed,thevolumecanonlybechangedbythesettingsontheexternalstereosystem. PresstheLASTkeyonceto returnto thepreviousscreenor repeatedly to returnto yourprogramif task hasbeencompleted.
VIZIOVU32LHDTVIOAUserManual 4°4 DTV / TW Tuner Setup When you first used your HDTV you will have setup your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP menu.
VlZlOVU32LHDTV10A UserManual 4,,4,3 Pac iaL Channel Seacoh If you believe channels are missed from the auto search, you can do a partial channel search to look for channel in a certain channel range again. Press the _ button to highlight the Partial Channel Search selection. Press the _ button to enter the submenu. Press the _ button to select scan mode to look for Analog, Digital, or both Analog/Digital Press the _ button to highlight channels. the "To" and "From" selection.
VlZlOVU32LHDTV10A UserManual ¢¢7 DsVLtqht Ssqnq As for Time Zone, setting the daylight saving time for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control. Press the a button to highlight the Daylight Saving selection. Press the D or _ button to select On or Off. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
VlZlOVU32LHDTVIOAUserManual 4,,5o2 Sleep Timer Press the a selection. button to highlight the Sleep Timer Press the _ button to select the timer to turn-off the TV in 30, 60, 90 or 120 minutes. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. 4oSo3 Wide The Wide option is the feature which allows you to select how your display would be size wise. When in TV mode; the selections are Normal, Wide and Panoramic views.
VlZlOVU32LHDTV10A UserManual 4,,Bo4 Input Naminq This feature has been added to facilitate you, the user in identifying or label the input and signal which is being watched. You could use up to 8 characters; either letters or numbers or combinations of both. Press a Press _ button to highlight this option. button to obtain the next screen which shows the different inputs. Press a button to select the desired input which you want to label or name (Examples: VCR, DVD .... etc.
VlZlOVU32LHDTV10A UserManual 4, So8 CE Press the a Press the _ (Otosed Oaptlom} button to highlight the CO(Closed Caption) selection. button.
VlZlO VU32L HDTV10A User Manual recommendations them. of setting these parameters since you, the user would have your own taste or like of Press the key labeled LAST as many times as it takes to exit the menu screens. A,,So6 H/V Position Press the a selection. button to highlight the H/V Position Press the _ button. A separate menu will appear with the following H/V Position settings H. Position Press the _l button to highlight Shift selection.
VlZIO VU32L HDTV10A User Manual ¢5.7 DTV / TV input Parental Control If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV. When the MENU button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the I_ button to display the SETUP page.
VlZlOVU32LHDTV10A UserManual 4oS-Q US TU Ratinq Follow the procedure in the previous section to display the Parental Control menu and then press the a button to highlight selection. the US TV Rating Press the _ button and the Block TV Rating panel will be displayed.
VlZlOVU32LHDTV10A UserManual US 4,_5oio Mou_e Ratinq {For US} Press the a button to highlight the US Movie Rating selection. Press the I_ button and the Block Movie Rating panel will be displayed.
VlZlOVU32LHDTV10A UserManual 4,,So12 Canadian Frenoh Ratinq Press the a button to highlight the Canadian French Rating selection. Press the q button and the Block Canadian French Rating panel will be displayed.
VlZIOVU32LHDTV10A UserManual 4o5.Z4 B{ocked Unrated Proqramminq Follow the procedure in the previous section 4.5.7 to display the Parental Control menu and then press the _ button Unrated TV selection. Press the _button to highlight to turn-on blocking of programming rating. the Block or turn-off the that does not have a Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
VlZlOVU32LHDTV10A UserManual 4,_$o_B Reset RLL Settinqs Press the a button to highlight Settings selection. the Reset All Press the I_ button to reset the TV to the default factory settings. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Note: This does NOT reset the Parental Control Password. Version 3/28/2008 58 www.VlZlO.
VlZlOVU32LHDTV10A UserManual 4°8 HDMI Input Picture Ad]ustment The Picture Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.2. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. 4.7 HDMI Input Audio Ad]ustment The Audio Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 4.3. 4.
VlZIOVU32LHDTV10A UserManual A.q Video Input PictuFe Rd]ustment The Picture Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.2. The menu difference is that there is no icon along the top for DTV / TV adjustments. A°io Video Input Rudio Rd]ustmemt The Audio Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.3.
VlZlOVU32LHDTV10A UserManual Auto Phase(forComponent input) Pressthe a buttontohighlighttheH/VPosition. Pressthe Q buttonand the new H/V Position submenuwillbedisplayed. Pressthe a buttonto highlightAutoPhase. PresstheQ buttonto executethis option.The TV will automatically look for the phaseof the signaltofinetunethepicture. Oncethe adjustmentsare completedpressthe LASTbuttonrepeatedly toexittheOSDcompletely. Version3/28/2008 61 www.VlZlO.
VlZIOVU32LHDTV10A UserManual 4°1_ Video Input Parental Contro[ The Parental Control menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 4.5.7. The menu difference is that there is no icon along the top for DTV / TV adjustments. 4.13 PC Input Picture Rd]ustment The Picture Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 4.2 for Backlight, Contrast, Brightness and Color Temperature.
VlZlOVU32LHDTV10A UserManual TheBacklightleveldoesnotaffectthe Brightness (blacklevel)or Contrast(whitelevel)of the picture,it adjuststhelampcurrentandthisaffectstheoverallbrillianceofthepicture. Oncetheadjustments arecompleted presstheLASTbuttonrepeatedly toexittheOSDcompletely. 4, 3°3 Bmiqhtness Press the a buttonto highlight theBrightnessselection.
VlZlOVU32LHDTV10A UserManual 4, 13.5 Color Temperature Press the a button to highlight Color Temperature selection. the option for The default is the 9300K (Cool) setting. Press the D or Q button if you want to choose the 9300, 6500 or Custom option. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. If you choose the Custom option, then a new menu will be displayed showing the primary color items, Red, Green and Blue.
VlZlOVU32LHDTV10A UserManual Vo Position Ao13o8 Press the a button to highlight the Vertical Shift selection. Press the _ button to start adjusting the vertical position of the picture. Use the D or _ button to adjust the vertical position. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Aoi3oQ Ane Tune Press the a buttontohighlight theFineTune selection. Press the _ buttontostart tuningthetothePC signal.
VlZIOVU32LHDTV10A UserManual 4°16 Understandinq Viewing FeaboFes Your HDTV features the following viewing modes. You can switch viewing modes using the remote control, please follow the instructions in page 35. 4oiSol Viewimq Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image. Standard TV broadcasts are displayed with a 4:3 Aspect Ratio.
VlZlO VU32L HDTV10A User Manual Chapter 5 Maintenance and TroubLeshootinq Maintenance Make sure that the power cable is removed from the socket before cleaning the TV. I. 2. Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may damage the housing, screen glass and remote control, and cause paint to peel. CLeaninq the Hoosinq and Remote Control Use the VlZlO soft cloth (included) for cleaning. I. 2.
VlZlOVU32LHDTV10A UserManual If the screen is black. Check your input connections. Power is ON but no screen image, Make sure the video cable supplied with the TV is secured to the correct video output port on the back of the VCR and the TV. Make any cable you have attached to the TV is secured to the correct output your Set-Top Box, DVD, etc. Adjust brightness and contrast. Check Source settings.
VlZIOVU32LHDTVl0AUserManual Tips for High-Definition Users. The LCD HDTV is an ideal platform for viewing High Definition Content. Best Image Quality will be achieved by the HDMI Input, then YPbPr, then RGB. However, due to variances distortions can occur. Tips for Users. Letterbox 8°3 Telephone Content in broadcast practices, it is possible some image Letterboxed (or "Widescreen") versions of DVD movies are most commonly formatted for standard 4:3 Televisions.
VlZlOVU32LHDTV10A UserManual 5.4 CompLiance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. SoS FGG GLass USA UL Canada CSA Germany UK VDE BASE/BS Japan Electric Appliance Control Act @ Radio ImtePCeremoe Statememt NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
VlZIOVU32LHDTVl0AUserManual Ohap em 6 MisoeLLameoos Jo omma ioo B01 Specifications Panel 31.5" Diagonal, 16:9 Aspect Ratio Resolution 1366 x 768 pixels Pixel (Dot) Pitch 0.51075mm Display Compatibility HDTV (720P) Colors 16.7 Million Brightness 450 cd/m 2 (typical) Contrast 1100:1 (typical), 5500:1 with DCR Response Time 8ms (typical) Viewing Angle >178 ° (horizontal/vertical) (H) x 0.
VlZlOVU32LHDTV10A UserManual 6oa GLossarv - Standard Definitions Analog TV: Today's TV system using radio frequency waves to transmit and display pictures and sound. Aspect Ratio (4x3): Traditional TV "aspect ratio", that is, the screen's width as compared to its height. For example, a "32 inch TV screen" would be 25 inches wide and 19 inches tall. Aspect Ratio (16x9): "Wide screen TV" aspect ratio which is more like a movie screen than a traditional TV.
VlZlOVU32LHDTV10A UserManual 6°3 Index Contrast, 39, 64 Reset Picture Mode, 42 A Sharpness, Tint, 39 DTV Special Accessories, 5 Adjustments Selecting the Screen Size, 73 Stepping through TV Channels, 35 Volume, 9, 35, 68 Advanced Video Features Black Level Extender, 40 Color Temperature (Color Temperature, 41 CTI (Color Transient Improvement, 40 DNR (Dynamic Noise Reduction, 40 Flesh Tone, 41 Features Digital Closed Inpnt Naming, Language, 48 Reset, 59 Sleep Timer, Wide, 49 Caption, 50 51 49 DTV
VlZlOVU32LHDTV10A UserManual Using 5.
