VIZIO VUR6Universal Remote User Manual Table of Contents 1.1 VIZIO Universal Remote Control .........................................................................................................................3 1.1.1 Insertion of Batteries in the Remote Control ................................................................................................6 1.1.2 Remote Control Range ........................................................................................................................
VIZIO VUR6Universal Remote User Manual 1.1 VIZIO Universal Remote Control The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four different components. The remote button functions are explained on the following pages. SET – This button starts all programming of the Remote Control. Remote LED – Blinks when the remote operates. POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the Standby mode.
VIZIO VUR6Universal Remote User Manual WIDE/Record – This button cycles through the available screen formats. The options are Wide, Zoom, Panoramic and Normal. Note: in RGB/PC mode the options are wide and normal. This button also functions as VCR Record when the component is activated with the remote control. SLEEP/Pause – This button allows the user to select the sleep options by adjusting the timer in 30 minute increments up to 120 minutes.
VIZIO VUR6Universal Remote User Manual ZOOM (- and +) – Use these buttons to increase or decrease the size of the picture. Note that in the zoom mode parts of the picture will not be visible because they extend beyond the edges of the screen. FREEZE – Press this button to “Freeze-Frame” the current screen. Press this button again the continue playing. RGB – This button selects an RGB Analog component such as a PC. PIP – Use this button to activate the Picture-In-Picture mode.
VIZIO VUR6Universal Remote User Manual 1.1.1 Insertion of Batteries in the Remote Control Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover. Precautionary Tips for Inserting the Batteries: Only use the specified AA batteries. Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.
VIZIO VUR6Universal Remote User Manual 4. Find the programming code for your VCR in the code list in the back of this book and enter it using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered. If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and manufacturer. 5. Point the remote control at the VCR and press the POWER button. The VCR will turn off.
VIZIO VUR6Universal Remote User Manual Note: a) b) If your DVD player does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, see “Searching for Component Codes.” Sometimes a code listed will only include limited functions. Try other codes that may include more functionality. 1.2.
VIZIO VUR6Universal Remote User Manual 1.
VIZIO VUR6Universal Remote User Manual Setup Code for VCR’s Setup Code for VCR’s 20038 STS 20042 Pentax 20042 Sylvania Philco 20035, 20479 20035, 20081, 20043 21972 Setup Code for Cable Converters Bell & Howell 00014 Bell South 00899 Clearmaster 00883 Philips 20035, 20081, 20739, 20618 Systemax Tagar Systems 21972 ClearMax 00883 Pilot 20037 Tashiko 20037 Coolmax 00883 Pioneer 20042, 20067 Tatung 20045, 20067 Daeryung Polk Audio 20081 Technics 20035, 20162 01877, 00877,
VIZIO VUR6Universal Remote User Manual Setup Code for Cable Converters Setup Code for Satellite Receivers Sony 01006 Hitachi Starcom 00003, 00014 00819, 00222, 01250 Supercable 00276 HTS 00775 Supermax 00883 Hughes Network Systems 01142, 00749, 01749, 01442 Tocom 00012 I-Lo 01535 Torx 00003 JVC 00775 Toshiba 00000 LG 01414, 01226 Trans PX 00276 Magnavox 00724, 00722 Tristar 00883 Memorex 00724 TS 00003 Mitsubishi 00749 V2 00883 Motorola 00869 Viewmaster 00883 N
VIZIO VUR6Universal Remote User Manual Setup Code for DVD Players Setup Code for DVD Players Setup Code for CD Players Koss 20651, 21980 Shinco 20717 Linn 30157 Lasonic 20798 Shinsonic 20533 Magnavox 30157 LG 20591, 20869, 20801 Sonic Blue 20869, 21099 Marantz Sony 20533, 20864, 21033, 21904, 21903 30626, 30029, 30157 MCS 30029 Miro 30000 Mission 30157 MTC 30420 NSM 30157 Liquid Video 21980 Lite-On 21158, 21058 Loewe Magnavox 20511 20503, 20539, 21976, 21914, 20675 SV
VIZIO VUR6Universal Remote User Manual Setup Code for CD Players Technics 30029 Victor 30072 Wards 30157, 30053 Yamaha Zonda 30888, 30036 30157 Setup Code for Audio Amplifiers Bose 30674 GE 30078 JVC 30331 Marantz 30321 Nakamichi 30321 Setup Code for Audio Amp/Tuners Setup Code for TV’s Hitachi 31273 Addison 10092 Inkel 30027 Admiral 10093, 10463 Integra 30135 Advent 10761, 10842 JBL 30110 Aiko 10092 JVC 30074, 31263 Aiwa 11914 Kenwood 31313, 31570, 30027 Akai KLH
VIZIO VUR6Universal Remote User Manual Setup Code for TV’s Setup Code for TV’s 10843 Setup Code for TV’s 11904 Chung Hsin 10180, 10053 Furi 10145 Cinema 10672 Futuretech 10180 Citizen 10060, 10030, 11928, 10092 Gateway 11756, 11755 GE 11447, 10047, 11454, 10051, 10451, 10180, 10030, 10178, 11917, 10092, 11907, 11922 10145 JVC 10053, 11923, 11253 Kangli 10661 KEC 10180 Kenwood 10030 KLH 10765, 10767 Kolin 10180, 10150, 10053 Clarion 10180 Commercial Solutions 11447, 10047
VIZIO VUR6Universal Remote User Manual Setup Code for TV’s Setup Code for TV’s Setup Code for TV’s Mudan 10051 Pulsar Skyworth 10748 Multitech 10180 Qingdao Sony NAD 10156, 10178, 10866 Quasar 10250, 10051, 11924, 10650 11100, 10000, 10650, 11925, 11904 National 10051 RadioShack Soundesign 10180, 10178 NEC 10154, 10156, 10051, 10053, 10030, 10178, 11704 10047, 10154, 10180, 10030, 10178, 11920, 11904 Sowa 10156, 10051, 10060, 10178, 10092 Squareview 10171 SSS 10180 Starlite
VIZIO VUR6Universal Remote User Manual Setup Code for TV’s Setup Code for TV’s Setup Code for TV’s 11918 Vidikron 10054 Waycon 10156 Tuntex 10030, 10092 Vidtech 10178 TVS 10463 Viewsonic 10463, 11909, 10623 VIZIO 11758, 11756, 10885, 10864 11755, 10885, 10864 White Westinghouse Yamaha 10030 Yapshe 10250 Vector Research 10030 Zenith Victor 10250, 10053, 10650 10017, 10463, 10178, 11904, 11929, 11911, 11909, 10092 Wards 10054, 10030, 10178, 10866, 11156 Warumaia 10661 16 www.
VIZIO VUR6Universal Remote User Manual 17 www.VIZIO.
VIZIO VUR6Universal Remote User Manual 18 www.VIZIO.
