User's Guide

Do not lose the M8 plastic screw-in protective cap. The ES1 M8 connector is only protected from water if
Do not lose the M8 plastic screw-in protective cap. The ES1 M8 connector is only protected from water if
the protective cap is screwed in or if a Rajant ES1 M8 adapter cable is properly installed. The protective
the protective cap is screwed in or if a Rajant ES1 M8 adapter cable is properly installed. The protective
cap is Finecables Enterprise Co. Ltd. part number PCNM8x1.0-2.
cap is Finecables Enterprise Co. Ltd. part number PCNM8x1.0-2.
A custom ES1 M8 male to USB 2.0 female adapter cable (shown below) provides a female USB A 2.0 port
(Rajant p/n 06-100069-001).
Figure: ES1 M8 Male to USB 2.0 Female Adapter Cable
A custom ES1 adapter cable (shown below) from M8 male to both a female USB A 2.0 port and a Reset
button is also available from Rajant (Rajant p/n 06-100069-002).
Figure: ES1 M8 Male to USB 2.0 Female and Reset Button Adapter Cable
2.5.1 M8 Connector Diagrams
In the following three diagrams, the M8 connector on the bottom of the BreadCrumb ES1 enclosure is
viewed with the front of the ES1 up and the bottom of the ES1 facing the user.
Figure: M8 5-pin Female (ES1 Enclosure Bottom)
Figure: M8 5-pin Female w/ Recessed Key Highlighted (ES1 Enclosure Bottom)
The male M8 connector of the ES1 M8 5-pin male to USB 2.0 female adapter cable has the matching angu-
lar key, shown at the top of the connector in the photo below:
Figure: M8 5-pin Male (ES1 Adapter Cable)