User's Guide

D.7 Connecting Power
D.8 Configuration
D.9 Placement
Appendix E: Sealed RJ45 Assembly
E.1 Parts of the Male Sealed RJ45 Ethernet Connector
E.2 Choose the Correct Soft Plug
E.3 Pre-thread Before Termination
E.4 Terminate Cable with the Metal-Shielded RJ45 Plug
E.5 Test the Ethernet Cable
E.6 Preparation After Termination
E.7 Mate Inner and Outer Shells
E.8 Connect RJ45 to Female WAPV RJ45
E.9 Mate and Then Cap the WAPV
Appendix F: Mounting Instructions
F.1 Pole Mounting Bracket
F.2 DIN Rail Mounting Bracket
Appendix G: Technical Bulletins
G.1 Rajant Best Practices: Grounding and Surge Protection
G.2 Waterproofing Rajant BreadCrumb RF Connections
G.3 Waterproofing BreadCrumb Cable Connections
G.4 BreadCrumb Models Support Only Passive PoE
G.5 Never Apply Power to the Data Input Port of a Rajant Mid-Span Power over Ethernet (POE)
Power Supply
G.6 Installation Constraints for Rajant AC Powered Accessory POE Power Supplies
Appendix H: Rajant End User License Agreement
Appendix I: GNU General Public License