User's Guide

Code Firmware Upgrade Codes (1*)

127 Failed to copy file system image.

128 Failed to checksum file system image.

129 Failed to create directory for next file system image.

131 Failed to mount next file system image.

132 Failed to create directory for settings.

133 Failed to copy current settings to next file system image.

134 Failed to unmount next file system image.

135 Failed to copy init image.

136 Failed to copy bootloader image.

137 This flash image may not be installed onto this BreadCrumb.

138 Failed to copy failsafe file system.

141 Error retrieving flash file.

142 The version you are installing does not support the configured Packet Cipher

143 The version you are installing does not support the configured MAC Address Cipher

144

The version you are installing does not support the configured Per-hop Authentication algo-

rithm

145 The version you are installing does not support the configured security policy

146 Failed to verify consistent country settings

147 The configured countries are not consistent

151 Pre-manufacturing install process failed

152 Firmware install failed

153 Post-manufacturing install process failed

154 The autorun is missing required symbols

155 GSC firmware update failed

161 Failed to restore configuration from last Restore Point

Code Diagnostic Codes (2*)

Recovery log detected. To clear this message, please take a diagnostic snapshot and up-

load to https://secure.rajant.com.

Internal error detected. Please take a diagnostic snapshot and upload to https//secure.ra-

jant.com. This message will be cleared on the next reboot.

23 Internal developer settings detected - may cause undefined behavior. Use zeroize to clear.

233

This device is not configured for commercial use and will cause undefined behavior. Con-

tact support to rectify.

234 This device is running BETA software. Contact support for the latest supported version.

24 Stress mode is running - may cause undefined behavior. Reboot to clear.

242 Internal hardware error detected via stress testing. Take a diagnostic snapshot and upload

to https//secure.rajant.com for analysis.