User's Guide

ManualsBrandsVIZMONET ManualsComputers & AccessoriesBreadCrumb Wireless Nodes (ES1-2450R)

ground connections must be used and must be connected to a protective earth ground. Protective

earth grounding operations must be performed by trained personnel, and according to local electrical

codes and industry best practices, as well as Rajant’s own recommendations.

Modifications

CAUTION

Changes or modifications not expressly approved by Rajant Corp. could void the user’s authority to op-

erate the equipment.

Rajant Products are compliant and warranted against manufacturing defects only so long as Rajant-au-

thorized accessories are used in deployment of Rajant Breadcrumbs. It is the responsibility of the opera-

tor and the installer to ensure the system as installed operates within regional requirements.

Professional Installation Attestation

Rajant Corporation addresses the following items to ensure that the above referenced equipment is pro-

fessionally installed:

The device will only be sold by Rajant Corporation or one of its authorized dealers. Rajant Corporation

and its authorized dealers will be under strict marketing control and will only market and sell the device

to professionals.

Professional installation is required for this device and will be performed only by someone knowledgea-

ble of its use. Rajant Corporation will ensure that the device is only marketed and sold to professionals.

The device is not sold to the general public and is sold only for industrial or commercial use by profes-

sional installers.

CAUTION

To reduce potential radio interference to other users, the antenna type and its gain should be chosen

so that the equivalent isotropically radiated power (EIRP) is not more than that permitted for successful

communication.

Maximum Certified Power

ISM band radio modules may be operated at full certified power when configured with the granted an-

tenna type. Operation of a radio at power levels that exceed the equivalent EIRP of the granted configu-

ration is prohibited. See the tables below.

Table: Maximum Certified Power: FCC (United States), IC (Canada)

IMPORTANT

In Canada, a license is required to use channels in the frequency range 5150-5250 MHz (on models that

offer these channels). The license may restrict transmit power. Licensing information may be found at

http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf11294.html

BreadCrumb

Model

Frequency

Range

(MHz)

Maximum Certi-

fied Total Con-

ducted Channel

Power (dBm)

Antenna

Type

Antenna

Gain

(dBi)

Maximum

Certified

EIRP (dBm)

ES1-2450R 2412-2462 26 (Average)

Omni-di-

rectional

5 31

ES1-2450R 5180-5240 23 (Average)

Omni-di-

rectional

7 30

ES1-2450R 5745-5825 25 (Average)

Omni-di-

rectional

6 31