USER MANUAL TH080C Center Armrest Monitor With Adjustable Bracket CAUTION: Please Test All Functions Before Installing.
Cont ent s Operating Instructions USB Operations Welcome .............................................................. 2 Switching DVD / USB / Memory Card Mode ............ 11 Setting Random .................................................. 11 Repeat Playback ................................................. 11 Safety Instructions................................................. 2 CAUTION .............................................................. 2 WARNING .........................................
Operating Ins truc tions Welcome ‧Thanks for purchasing Center Armrest Monitor. This manual will help you use the exactly features of your new monitor. ‧Please read all safety and operating instructions in this manual carefully, and keep this manual for future reference. Safety Instructions Be sure to observe the following instructions and precautions to ensure safe using of this monitor.
Operating Ins truc tions PRECAUTIONS Please read all safety and operating instructions in this manual carefully, and keep this manual for future reference. Personal Safety ‧The back seat passenger must tie the safety belt before operating this monitor. ‧Do not insert the USB while driving. Failure to do so may result in personal injury. Temperature Do not operate your unit in ambient temperature above +50°C (+122°F) or below 0°C (+32°F).
Getting St arted Monitor Function Overview 8 11 12 9 10 1 2 1 3 4 5 6 7 POWER 13 11 - Press PWR button to turn on or off the unit. 2 SRC 12 - Press SRC button to switch the display source. DVD / AV IN1 / AV IN2 3 MUTE Switch - Press this button to open the disc cover. Disc Tray （DVD / DVD-R / DVD-RW / DVD+R / DVD+RW / VCD / CD-ROM / CD-RW） 13 Disc Cover - Press MUTE button to disable or enable audio output.
Getting St arted When Using the Remote Control Remote Control Function Overview The first time when you use the remote control, please remove the plastic tape before using. Plastic Tape Battery Replacement 1 . Opening the battery case. Pull out the battery tray. 2 . Replacing the battery. (CR-2025) CAUTION ‧Point the remote control at the IR Reciver within 2 meters.
Getting St arted 1 Power Switch monitor power ON/OFF OSD Menu Enter or exit on-screen display menu system. 2 3 OSD 4 F/R IR Sensor (2) Press Twice : Switch IR ON/OFF. 5 USB/DVD USB / DVD Switch DVD / USB / Memory Card mode. 6 SOURCE Display Source Function Switch Number / Function mode. FM Modulator (Option) (1) Press Once : Switch FM ON/OFF. ( 87.7MHz to 88.9MHz) Stop Playback 7 8 SETUP DVD Setup Menu 9 MENU Disc Menu Switch display source.
Ba sic Operations Moni tor Set up Adjusting OSD Before Using the MMD Before using the MMD, please remove the card from the Multi Media Driver (MMD). Card Visual brightness, contrast and color are adjustable. ‧Each source is independently adjustable. ‧Make adjustments within 6 seconds, otherwise the OSD (On Screen Display) will turn off automatically. Adjusting Brightness 1. Press 2. Press Turning Power ON/ OF 1. Press to turn ON. 2. To turn off the power, press and hold OSD to select Brightness.
MMD Operations CAUTION ‧Not all function will operate for every DVD. See the individual MMD’s instructions for details on the features supported. ‧Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary. ‧When using the remote control, be careful to press a button at time. Pressing multiple buttons at the same time may cause erroneous operation.
MMD Operations Finding the Beginning of Chapters Repeating Display Period (A-B) During playback, press beginning of chapters. 1. During playback, press or Use this function to set a display period repeatedly. to find the The chapter / track switches each time the button is pressed, and playback of the selected chapter / track starts. Press this to start playback from the beginning of the current chapter or track. Press this to start playback from the beginning of the following chapter or track.
MMD Operations Displaying Disc Status Switching Subtitles (DVD only) Use the procedure described below to display the status (title number, chapter number, etc.) of the currently playing DVD/VCD/CD on the monitor screen. With multiple subtitle language DVDs, the subtitle language can be switched during playback, or subtitles can be hidden. 1. During playback, press 8 DISPLAY. The playback status is displayed.
USB Operations Setting RANDOM CAUTION ‧Not all function will operate for every formats. See the individual USB’s instructions for details on the features supported. ‧Do not use USB while driving your vehicle. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in serious injury or an accident. ‧If you try to perform an invalid operation (based on the type of disc being played), the message “ ” will be displayed on the monitor screen.
MMD Set up DVD Setup Operation General Setup Page The following steps 1 to 2 are common to each of the DVD settings described here. Refer to each section for details. 1. Press and hold SETUP on the remote control. The setup menu appears on the monitor. 2. Press or to select desired setting item (General Setup Page / Password Setup Page / Preference Page), then press TV display, OSD language, Screen savre and Lastmemory are adjustable. 1. Press SETUP button on the remote control.
MMD Set up Setting OSD Language (default: English) 3. Press or to select desired language. ‧There are 9 kinds of languages can be chosen. (English, French, Spanish, German, Italian, Portuguese and 中 文) 4. Press ENTER to save adjustment. The settings are stored and the setup mode is deactivated. - - General Setup Page - TV Display Password Setup Page There is not original password. 1. Press SETUP button on the remote control. The setup menu appears on the monitor. 2.
MMD Set up Setting Disc Menu Language (default: English) Preference Setup TV type, Audio, Subtitle, Disc Menu and Parental are adjustable. 1. Press SETUP button on the remote control. The setup menu appears on the monitor. 2. Press or 4. Press or to select desired disc menu language. 5. Press to select Preference Setup. to save adjustment. ENTER - - Preference Page - TV Type 3.
Ins tallation and Conn ections Before installing or connecting the unit, please read the following and page 2~3 of this manual thoroughly for proper use. CAUTION: The back seat passenger must tie the safety belt before operating the unit. WARNING: Make the correct connections. Failure to make the proper connections may result in fire or product damage. Use only in cars with A 12 volt negative ground. (Check with your dealer if you are not sure.
Ins tallation and Conn ections Parts Indication LCD Monitor Outside Cover Of Right (left) Bracket Open Cover DVD Player Plastic Washer Signal Cable (blue) Mounting Plate Outside Cover Of Transverse Axle Signal Cable (black) Antenna Transverse Axle Rear-Seat Entertainment 16
Ins tallation and Conn ections CAUTION: CAUTION: The back seat passenger must tie the safety belt before operating the unit. LIMITATION Please according to the shape of the console box and monitor folding position to decide the bracket installation angle and position. When the monitor is folded, it should be parallel to the front of console box, and keep distance more than 1cm.(Figure B) VERTICAL INSTALLATION: ● The width between the front seats must be greater than the width of the monitor.
Ins tallation and Conn ections Installation Step the width and height of the 1 Measure console box first. ※For example: The console box is 15(W) x 25(H) cm. (Figure 1) (Figure 1) 2 Adjust the width of the transverse axle. ※For example: The width of the console box is 15cm. (Figure 1) According to the width of the Center Console Box to pull out and adjust the suitable width of the transverse axle. (Figure 2) (Figure 2) 3 Choose suitable Plastic Washer.
Ins tallation and Conn ections 5 Choose the installation way of the screws. A Type ‧A Type (Figure 5-1) Put the mounting plate inside of the console box, and fix the mounting plate from outside to inside with 4pcs 4x25 self-tapping screws. same as right bracket. ‧B Type (Figure 5-2) Use 4x25 self-tapping screws and spring buckle to fix the bracket on the both sides of the console box. 6 Drill cable hole.
Ins tallation and Conn ections Connections AV Connectors Green / Yellow Video Input Connector This connector is used in combination with the video inputs of other video products (AV head out or TV Tuner). White(L) Red ( R) Black Blue / Yellow Audio Input Connectors These connectors are used in combination with a head unit or TV Tuner with audio output connectors. Video Output Connector This connector is used in combination with the video inputs of other video products (AV head unit or LCD monitor).
Ins tallation and Conn ections System Connections TV Tuner Multi Media Station AV Output L R V AV Input (Black) V V AV Input R R L L V L L ( )12V (Black) R R （Black） L V V （Black） ACC - out R AV Output (Blue) （Red） （Red） Power Filter(Option) (+)12V ACC (Red) AV 2 AV Input TH080C L R V AV Output V Signal Cable(Black) V Antenna (Option) R R L AV Input (Black) Signal Cable(Blue) AV Output (Blue) Game Player iPod 21 Center Armrest Monitor L
Inf ormation Accessories A Type Screen Bracket Arm x1 Mounting Plates x2 x1 Screws (F⊕4×25) - For Mounting Plates x8 B Type Screws (F⊕3×8) - For Outside covers of Bracket Outside Covers Of Bracket x2 Plastic Washers x4 Spring Buckles x8 Self-tapping Screws (F⊕4×25) - For Spring Buckles x8 Allen Key 1 Thick oblique washer x2 2 Thin oblique washer x2 3 Flat washer x 2 2 1 3 x1 x6 Remote Control User Manual OS D RE TU 1 ZO FU NC RN 0/1 M ER 2 F/R SLO A-B LE 5 DIS PL
Inf ormation General Specifications DISPLAY SCREEN Size 8 inch Aspect Ratio 16:10 LCD-Type Digital type TFT Liquid CrystalDisplay DVD Loader System Open Cover (Made in China) Number of Elements 800(W)x480(H)x3 Effective Number of Elements 99.9% or more Back Light LED Lamp GENERAL Operating Voltage 10 - 16VDC (Typical: 12 V) Power Consumption 1.2 A (MAX) 0.82 A(TYP) 0.08A (Stand by) Video Input 1.0V p-p 75 Video Output 1.0V p-p 75 Audio Input 2.0V rms (MAX) Audio Output 2.
Inf ormation Troubleshooting CAUTION If you encounter a problem, please turn the power off, then on again. If the unit still no function normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized dealer. No function or display. Vehicle’s ignition off.
Inf ormation Picture is unclear or noisy. Disc is being fast-forwarded or fast-reversed. - The picture may be unclear, but this is normal. Vehicle’s battery power is weak. - Check the battery power and wiring. (The unit may malfunction if the battery power is under 11 volts with a load applied.) Monitor’s fluorescent tube is worn out. - Replace the monitor fluorescent tube. Image stops sometimes. Disc is scratched. - Replace with a non-scratched disc. The remote control does not work.
Inf ormation Warranty Card CAUTION: ‧We will delivery the product after it passed the tight quality control and detailed examining. ‧Under normal usage, if the product is out of order, please inquires your retailing shop or particular customer's service center, we will repair it for free during warranty period. ‧Please test all Functions Before Installing. ‧Please record the serial number of your unit in the space provide below and keep it as a permanent record.
TH080C-100072610
