User's Manual

148 149
USING MENU
World Time
6. Press Skip to skip the step that asks you to enter button values.
7. If there is not any response from the device in 5 seconds, a message that asks you whether to restart the
process is displayed.
Caution: Key addition is restricted to certain keys only. Incorrect button input may cause malfunction.
[Remote Controller List]
Switch on the added remote controller.
Remote Control Function
Press 2 Select an item Use remote controller
Remote Controller Precaution
Make sure the device is firmly plugged into a power outlet.
When adding a device, run the steps after the device is switched on.
Depending on devices, some or all remote control function may not be supported.
While pressing buttons for remote control function, you may not be able to answer incoming phone calls.
Recommended distance to a device is 10m.
Depending on the purchase date, the remote control function may not function or may malfunction.
Search
Using Remote Control Function, your cellular phone can be used as a remote controller for television, DVD,
VCR, audio, LD/VCD, and Karaoke devices.
1. Press key in standby mode to enter the menu screen.
2. Select 9 to enter Joy World.
3. Select 4 to execute the remote control function.
Or press a button located below key to enter the remote function.
[Add a New Device]
This function adds a new device to remote control function.
Add by Learning
1. Locate a device to be added to the cellular phone’s remote control function.
2. Once the device is in range, adding process starts.
3. Select one of dTV/ DVD/ VCR/ Audio/ LD/VCD.
4. Enter a file name.
5. When key is pressed, the cellular phone becomes standby mode. Press the remote device button according
to instruction.
Remote Control Function