Service manual

CAFFÈ MIO – OPERATION AND SERVICE
Caffè Mio 2001 - Operation & Service Manual April 3, 2002 Page 6 of 14
SET-UP MENU
LCD MESSAGE PROCEDURE
ENTER CODE
CODE:
An access code must be entered to get into SET-UP mode. The access code is:
COFFEE + PACKET + CHOCOLATE + COFFEE
'SET-UP'
SET PROD. COFFEE
1. Press the
COFFEE button to enter this menu.
2. Select COFFEE or COFFEE STRONG and a CUP size.
3. Increase or decrease the product timing using the hidden scroll buttons.
To test the coffee quantity to be dispensed, press the
HOT WATER button.
To return to the main menu, press the
SET-UP mode button.
'SET-UP'
SET WATER COFFEE
1. Press the
COFFEE button to enter this menu.
2. Select a
CUP size.
3. Increase or decrease water timing using the hidden scroll buttons.
To test the water quantity to be dispensed, press the
HOT WATER button.
To return to the main menu, press
SET-UP mode button.
'SET-UP'
ENABLE SWITCH
1. Press the COFFEE button to enter this menu.
2. Enable or disable product or cup size by pressing the corresponding button on the
front selection panel.
If LED is on, the corresponding button is enabled and if LED is off, the corresponding button is
disabled.
To return to the main menu, press SET-UP mode button.
'SET-UP'
SET TOP PAUSE
1. Press the COFFEE button to enter this menu.
2. Select a cup size.
3. Increase or decrease top pause timing by using the hidden scroll buttons.
To return to the main menu, press
SET-UP mode button.
'SET-UP'
SET BOTTOM PAUSE
1. Press the COFFEE button to enter this menu.
2. Select product and cup size.
3. Increase or decrease bottom pause timing by using the hidden scroll buttons.
To return to the main menu, press
SET-UP mode button.
'SET-UP'
DELAY PAUSE
1. Press the
COFFEE button to enter this menu.
2. Increase or decrease delay pause timing by using the hidden scroll buttons.
To return to the main menu, press
SET-UP mode button.