User`s manual

HEADSPEAKER – 5.1 HEADPHONE SYSTEM
• This list displays sound devices installed in the system. Please make sure that
HeaDSPeaker is present and has a green symbol indicating the default device status.
• If HeaDSPeaker isn't the default device, right-click it and select set as default device.
• Click the configure button at the bottom left to open a speaker configuration dialog
(figure 12). If multichannel audio configuration isn't activated, activate it from the list.
• Click next until configuration is finished. Now you're ready to launch the diagnostic
software as described in chapter 4.
Page 13
Figure 11: Sound and audio devices under Windows Vista