User`s manual

HEADSPEAKER – 5.1 HEADPHONE SYSTEM
2.4 C onne ctin g for 5.0 D olby s urround
• Attach the head tracking sensors (part #2) to your headphones using the provided strip
or other suitable way. Make sure that connection is secure and sensors are firmly in
place (see figure 5). Please note that orientation is significant, sensors must face
towards the DSP unit and have a clear line-of-sight.
• Attach signal cable (part #5) between head tracking sensor's connector and DSP unit's
”sensor” connector.
• Attach headphone's signal cable to DSP unit's “headphones” connector (figure 6).
• Attach USB voltage adapter (part #4) between a mains output and DSP unit's USB
connector.
• Attach “line-in” to headphone output or line output of the signal source (TV, Xbox360,
Playstation 3 etc) using appropriate cable (part #8 or other suitable cable). Volume
attenuator (part #7) can be used between headphone output and the headphones.
Note 1: Please do not attach volume attenuator in the sensor-connector!
Note 2: If headphone output is used, please make sure that sound source doesn't do
any unnecessary signal processing. That can potentially prevent DSP-logic from decoding
from stereo to multichannel, or interfere with HeaDSPeaker's dynamic auralization.
Page 8
Figure 7: connections in Dolby surround mode