User guide

104
M5000 Series: User Guide
Issued June 20, 2007
PMC Connector Pinout
E-1 General Description
“NC” means Not Connected.
“PU” and “PD” mean that the connector pin is connected to +5V via a pull up resistor or to ground
(GND) via a pull down resistor respectively.
Connections to the VME P2 connector are denoted as P2-[row][pin].
Example: P2-D1 means connection to pin 1 in row D of the VME P2 connector.
Pins that are PU, PD or NC for compliance with otherwise unsupported PCI signals have the PCI
signal name appended in parenthesis.