User guide

M5000 Series: User Guide

Issued June 20, 2007

Installation and Hardware description

2.1 Before You Begin

Precautions in Handling and Storage

Static electricity can permanently damage your M5000. Prevent electrostatic damage by

taking proper precautions.

• Make sure your body is grounded when coming into contact with the board by wearing an anti-

static wrist strap.

• If an anti-static wrist strap is not available, touch a grounded surface, such as the bare metal

chassis, before touching the M5000.

• Only leave the board on surfaces with controlled static characteristics, i.e. specially designed

anti-static table covers.

• When handing the board to another person, first touch this person’s hand, wrist etc. to discharge

any static potential.

• Always store the board in an anti-static bag or other static resistant container.

• If an electric screwdriver is used, it should be grounded and shielded to prevent sparks.

Inspection

Make sure that the M5000 model you have received is according to your purchase order. Check that

all items are present according to your purchase order.

Note – You should also inspect the board to verify that no mechanical damage has occurred.

Please report any discrepancies or damage to your distributor or to VMETRO

immediately.