User guide

31
Issued June 20, 2007
M5000 Series: User Guide
QLOGIC ISP2312 Dual Fibre Channel Controller
3.3 QLOGIC ISP2312 Dual Fibre Channel Controller
The ISP2312 is a highly integrated single-chip, dual-channel, bus master, Fibre Channel processor
that targets storage, clustering, and networking applications. This chip connects a conventional PCI
or PCI-X bus to one or two 1.062 or 2.125 Gbps Fibre Channel ports connected to fabric, single
arbitrated loop or point-to-point topologies.
The ISP2312 is a fully autonomous device, capable of managing multiple I/O operations and
associated data transfers from start to finish without host intervention.
The ISP2312 balances the advanced bus speeds and efficiency of PCI-X with exceptional 2-Gbps
Fibre Channel performance. Fibre Channel support for SCSI, IP, and VI (Virtual Interface) allows
the ISP2312 to target a wide spectrum of storage and system area networks (SANs).
One serial PROM is required for the FC controller to save the configuration.
Two SFF modules are located on the front panel and are used to transfer data via Fibre Channel.