User guide

40
M5000 Series: User Guide
Issued June 20, 2007
PMC Subsystem
4.4 PMC to VME connections
PMC#1-P4 to VME-P2
In addition to the standard PCI(-X) bus, the PMC#1 site includes a connection between its P4
connector and the VME-P2 connector. This connection follows the ANSI/VITA 35-2000 standard
(PMC-P4 pin out mapping to VME P0 and VME64x-P2).
As for the PMC#1-P4 to VME-P2 connection, signals are routed as differential pairs.
PMC#2-P4 to VME-P0
In addition to the standard PCI-X bus, the PMC#2 site includes a connection between its P4
connector and the VME-P0 connector.
Signals are routed as differential pairs.
Note – PMC#1-P4 is not mounted on RACEway models.