User guide
49
M5000 Series: User Guide
Issued June 20, 2007
6 Mezzanine PMC Carrier
Precautions in Handling and Storage
Static electricity can cause permanent damage. Prevent
electrostatic damage by taking proper precautions.
• Make sure your body is grounded when coming into contact
with the board by wearing an anti-static wrist strap.
• If an anti-static wrist strap is not available, touch a grounded
surface, such as the bare metal chassis, before touching the
M52xx and Mezzanine PMC Carrier board.
• Only leave the board on surfaces with controlled static
characteristics, i.e. specially designed anti-static table covers.
• When handing the board to another person, first touch this
person’s hand, wrist etc. to discharge any static potential.
• Always store the board in an anti-static bag or other static
resistant container.
• If an electric screwdriver is used, it should be grounded and
shielded to prevent sparks.
Part Numbers referred to in this chapter:
• MEZZ-x500F - Mezzanine PMC Carrier board (3 PMC Slots)
• M52xx - The base board (2 PMC Slots)
• M55xx - The combination of base board and carrier board (5
PMC Slots)