User's Manual

vMix User Guide
197 / 208
SetPanX Change current PanX value of Input.
0=centered, -2=100% to left, 2=100% to right
Value = Value -2-2
Value,Input
SetPanY Change current PanY value of Input.
0=centered, -2=100% to bottom, 2=100% to top
Value = Value -2-2
Value,Input
SetPictureEffect Set transition effect for Photos and PowerPoint Inputs (Fade, Zoom, etc)
Value = Transition
Value,Input
SetPictureEffectDuration Set duration of transition effect in Milliseconds
Value = Duration MS
Value,Input
SetPictureTransition Set transition time between Photos and PowerPoint slides in Seconds
Value = Seconds
Value,Input
SetPosition Set Position of selected Input according to Value in Milliseconds
Value = Milliseconds
Value,Input
SetRate Set Playback speed/rate for Videos and Video Delays
0.5=50%,1=100%,2=200% etc
Value = Speed 0.1-4
Value,Input
SetRateSlowMotion Set Slow Motion speed for Instant Replay
0.5=50%,1=100% etc
Value = Speed 0-1
Value,Input
SetZoom Change current Zoom level of Input.
1=100%, 0.5=50%, 2=200%
Value = Value 0-5
Value,Input
SharpenOff Input
SharpenOn Input
VideoCallAudioSource Master,Headphones,BusA,BusB,BusC,BusD,BusE,BusF,BusG
Value = Source
Value,Input
VideoCallVideoSource Output1,Output2,Output3,Output4
Value = Source
Value,Input
VideoDelayStartRecording Start Video Delay Recording Input,Duration
VideoDelayStartStopRecording Toggle Video Delay Recording Input,Duration
VideoDelayStopRecording Stop Video Delay Recording Input,Duration