User's Manual

Table Of Contents

vMix User Guide

55 / 208

Seconds: Select the delay buffer size in seconds. This is an approximate value based on a 30FPS input.

Control

Record: Turn on or off the updating of the Video Delay.

Speed (100%): The delay can be played back at a variety of speeds including full speed and slow motion

such as 50%.

Save Seconds (10): Select the number of seconds of the most recent Video Delay footage to save to file.

Save Location (List): Select the location to save the video delay clip once the Save button has been

clicked. See Saved Delay Clips section below.

Save: Click this button to begin saving the Video Delay footage to file. This button will light up red while the

save is in progress. The video delay will stop recording until the file has been completed.

Saved Delay Clips

Video clips of delay footage can be saved at any time by clicking the Save button (see Save in the Control

section above)

There are two locations in vMix the delay clips can be saved to:

List

Each saved clip will automatically be added to a separate List Input when complete. This List Input is

dedicated to holding all video delay clips in a vMix session regardless of source.