User's Manual
Table Of Contents
- Introduction and Features
- Getting Started
- Presets
- Video Controls
- Fullscreen
- Transitions
- Production Clocks
- Categories
- Fade Bar
- Pause Inputs
- Overlays
- Right Click Menus
- Settings
- Inputs
- Input Settings
- Audio
- Recording
- Live Streaming
- External Output
- Keyboard, MIDI and Controller Shortcuts
- Activators - MIDI Lights and Faders
- vMix Control Surface
- Web Controller
- Instant Replay
- PTZ - Pan Tilt Zoom
- NDI - Network Device Interface
- SRT - Secure Reliable Transport
- Data Sources
- vMix Call
- GT Title Designer
- vMix Title Designer (Legacy)
- PlayList
- MultiCorder
- Tally Lights
- Interlaced Support
- Statistics
- Snapshot
- Padlock
- Scripting and Automation
- Developer Information
- Shortcut Function Reference
- Safe Areas
- Undo Button
- Waveform and Vectorscope Monitor
vMix User Guide
80 / 208
These audio meters can be used to monitor the audio audio at the pre-effects stage (for any effects, volume
or gain, including delay)
and the post-effects stage (after all effects, volume, gain and delay have been applied)
Format
Displays the current audio format of the input
Channel
Select the audio channel to use for this input.
If you have a Microphone plugged into the left channel or right channel independently. Select
SeparateMono here.
Separate mono allows you to adjust the volume of both mono channels independently from the Audio Mixer.
The audio from each microphone will be audible on both the left and right channels simultaneously.
For finer control of how different channels are mixed. See Channel Mixer and Channel Matrix below.
Gain
Select the gain (or amplification) in decibels.
Gain is added after the compressor. (See below)
Delay
Delay the audio source in milliseconds
Visible in Mixer
Untick this box to hide this Input from being displayed in the Audio Mixer.
Plugins
See Audio Plugins
EQ