Spec Sheet

Video Mount Products Mounting Solutions For Video,Audio, & Security... Nothing Holds Up Better!
The wall ush with tilt mount for large digital signage at
panels shall be the Video Mount Products (VMP) FP-LDSB. The
mount shall be designed to attach to at least 2 studs up to 16”
apart or other suitable support surface. The mount shall be
designed with a section wall plate that can have additional
sections (VMP model DS-BP) added to extend the length. The
mount shall be constructed primarily of formed steel. The
mount shall be capable of tilting from -5° to +15° and the tilt
shall be lockable at 5° increments. The adjustable mounting
rails shall be capable of accommodating a maximum hole pat-
tern of 810 mm wide and 530 mm tall without extensions and
with the rail extensions included with the unit capable of reach
a maximum hole pattern height of 810 mm tall. The mount
shall be capable of adjusting to accommodate a wide variety of
at panels ranging in size from 32” to 63” and not necessarily be
model specic. The load capacity shall be 180 lbs.
Video Mount Products
345 Log Canoe Circle
Stevensville, MD 21666
Toll Free: 877.281.2169
Telephone: [phone]
Facsimile: 410.643.6615
www.videomount.com
Product Specications:
(for Architects & Engineers)
FP-LDSB
Large Flat Panel Digital Signage Mount
Product Features:
Holds most 32” – 63” at panels in portrait or landscape
Maximum at panel hole pattern – 810mm x 530mm
(810mm x 810mm with extensions)
Adjustable tilt -5° to +15° lockable at 5° increments
Sectional wall plate which can be integrated with
multiple FP-LDSB’s to create a video wall
Distance from wall to back of the at panel – 2.5” (2.6” w/ extensions)
Load capacity – 180 lbs
Black powder coat nish
12
"
38.65
"
3.23
"
5.8
"
8.1
"
200mm ~ 810mm
533.4
812.8
FP-LDSB
+15
-5