Instruction Sheet For: LCD-MID-CHB For more information, please contact us at: 345 Log Canoe Circle, Stevensville, Maryland 21666 Toll Free: 877.281.2169 Phone: 410.643.6390 Fax: 410.643.6615 www.videomount.
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Qty 1 1 1 2 2 1 4 4 2 2 1 1 2 2 2 2 2 2 1 1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 DESCRIPTION Base Plate Tilt Plate Pipe Couple Screen Mounting Brackets Security Screw M5*P0.8*L20 Long Allen Key M4 Screw M8*P1.25*L20 Nylon Washer 12.5* 30*T1.8 Washer 17* 55.6*T3.0 PVC Washer 16.5* 55.6*T0.7 Nylon Nut M16*P2.0 Cotter Pin Washer 8.5* 25*T2.0 Washer 5/16"* 19*T1.
Step 1 Before starting, lay out all parts to your mount and match them to the parts list provided. Verify that you have all your parts before attempting to assemble the mount. Step 2 3 using the large Attach the base plate (#1) to the pipe couple (#3) 1 9 11 washers (#9), PVC washers (#10) Once 10 and M16 nylon nut (#11). 11 the nylon nut (#11) is tight, slide the cotter pin (#12) through the 12 small hole near the bottom of the screw coming out of the pipe couple (#3).
Step 5 3 onto the 1.5” NPT mast as tight as posScrew the pipe couple (#3) sible. Then tighten the ¼” – 20 brake screw (#19) into the pipe 19 20 couple using the M3 Allen Key (#20). Note: It is important to tighten down the brake screw (#19) 19 as far a possible to prevent the pipe 3 from rotating off of the 1.5” NPT mast. couple (#3) Step 5: Attaching the pipe couple to the 1.
