Setting Up Desktop and Application Pools in View

Table 16‑5. View PCoIP General Session Variables (Continued)
Setting Description
Configure PCoIP virtual channels
Specifies the virtual channels that can and cannot operate over PCoIP
sessions. This setting also determines whether to disable clipboard
processing on the PCoIP host.
Virtual channels that are used in PCoIP sessions must appear on the
virtual channel authorization list. Virtual channels that appear in the
unauthorized virtual channel list cannot be used in PCoIP sessions.
You can specify a maximum of 15 virtual channels for use in PCoIP
sessions.
Separate multiple channel names with the vertical bar (|) character. For
example, the virtual channel authorization string to allow the mksvchan
and vdp_rdpvcbridge virtual channels is mksvchan|vdp_vdpvcbridge.
If a channel name contains the vertical bar or backslash (\) character,
insert a backslash character before it. For example, type the channel
name awk|ward\channel as awk\|ward\\channel.
When the authorized virtual channel list is empty, all virtual channels
are disallowed. When the unauthorized virtual channel list is empty, all
virtual channels are allowed.
The virtual channels setting applies to both agent and client. Virtual
channels must be enabled on both agent and client for virtual channels
to be used.
The virtual channels setting provides a separate check box that allows
you to disable remote clipboard processing on the PCoIP host. This
value applies to the agent only.
By default, all virtual channels are enabled, including clipboard
processing.
Configure the PCoIP transport header
Configures the PCoIP transport header and sets the transport session
priority.
The PCoIP transport header is a 32-bit header that is added to all PCoIP
UDP packets (only if the transport header is enabled and supported by
both sides). The PCoIP transport header allows network devices to make
better prioritization/QoS decisions when dealing with network
congestion. The transport header is enabled by default.
The transport session priority determines the PCoIP session priority
reported in the PCoIP transport header. Network devices make better
prioritization/QoS decisions based on the specified transport session
priority.
When the Configure the PCoIP transport header setting is
enabled, the following transport session priorities are available:
n
High
n
Medium (default value)
n
Low
n
Undefined
The transport session priority value is negotiated by the PCoIP agent
and client. If the PCoIP agent specifies a transport session priority value,
the session uses the agent-specified session priority. If only the client has
specified a transport session priority, the session uses the client-
specified session priority. If neither agent nor client has specified a
transport session priority, or Undefined Priority is specified, the session
uses the default value, Medium priority.
Setting Up Desktop and Application Pools in View
232 VMware, Inc.