User manual

Prerequisites
n
To use USB devices with a remote desktop, the View administrator must have enabled the USB feature
for the remote desktop.
This task includes installing the USB Redirection component of the agent, and can include setting
policies regarding USB redirection. For more information, see the View Administration document if you
are using Connection Server and Agent 5.3.x. See Setting Up Desktop and Application Pools in View if you
are using Connection Server and Agent 6.0 or later.
n
If this is the first time you are attempting to connect a USB device, you must provide the Administrator
password. Horizon Client will prompt you when it is time to do so.
Some components required for USB redirection that are already installed by Horizon Client need to be
configured, and configuration of these components requires Administrator privileges.
Procedure
n
Manually connect the USB device to a remote desktop.
a If this is the first time you are using the USB feature, from the VMware Horizon Client menu bar,
click Connection > USB > Start remote USB services and provide the Administrator password
when prompted.
b Connect the USB device to your local client system.
c From the VMware Horizon Client menu bar, click Connection > USB > Connect to a desktop to
list USB devices.
d Connect to a remote desktop to list the connected USB devices and select a USB device.
The device is manually redirected from the local system to the remote desktop.
n
Connect the USB device to a remote hosted application.
a If this is the first time you are using the USB feature, from the VMware Horizon Client menu bar,
click Connection > USB > Start remote USB services and provide the Administrator password
when prompted.
b Plug in the USB device.
c Launch the remote application.
d Click the Settings button (gear icon) in the upper right corner of the desktop and application
selection window.
e Select Applications in the left pane of the Settings dialog box.
f Click USB at the top of the right pane of the Settings dialog box.
The available USB devices appear in the left pane.
g Select a USB device and click Connect Device.
If a USB device is already connected to a remote desktop or application, you must disconnect the
device from the desktop or application before you can select it.
h Select a remote application and click Continue.
You can select any running application on the RDS host. After you select a remote application, you
can use the USB device with the remote application.
i After you finish using the remote application, open the Settings dialog box again, select USB, and
select Disconnect to release the USB device from the remote application.
You can now use the USB device with your local client system, a remote desktop, or another
remote application.
Using VMware Horizon Client for Mac OS X
44 VMware, Inc.