Manualshelf

Technical data

ManualsBrandsVMware ManualsOtherVCENTER CONFIGURATION MANAGER 5.3
71727374757677787980
Solution Architectural Overview
VMware Horizon View 5.3 and VMware vSphere for up to 2,000 Virtual
Desktops Enabled by Brocade Network Fabrics, EMC VNX, and EMC Next-
Generation Backup
80
Zoning is mechanism used to specify the devices in the fabric that should
be allowed to communicate with each other for storage network traffic
between host & storage (Block based only). Zoning is based on either port
World Wide Name (pWWN) or Domain, Port (D, P). (See the Secure SAN
Zoning Best Practices white paper in Appendix C for details.) When using
pWWN, the SAN administrators cannot pre-provision zone assignments until
the servers are connected and the WWN name of the HBAs is known. The
Brocade fabric-based implementation supports a scalable solution for
environments with blade and rack servers. This solution calls for a minimum
of 2 zones:
Block Storage Network
Figure 21 depicts the VLANs for Client Access network & Management
network and the zones for Bock Storage network connectivity
requirements for a block-based VNX array.
Figure 21. Required networks with block storage variant