5.1

7 Enable the SSL VPN-Plus Service on page 112
After configuring the SSL VPN-Plus service, enable the service for remote users to begin accessing private
networks.
Add an IP Pool
The remote user is assigned a virtual IP address from the IP pool that you add.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click a vShield Edge instance.
6 Click the VPN tab.
7 Click the SSL VPN-Plus tab.
8 In the Configure panel, click IP Pool.
9
Click the Add ( ) icon.
The Add IP Pool dialog box opens.
10 Type the begin and end IP address for the IP pool.
11 Type the netmask of the IP pool.
12 Type the IP address which is to add the routing interface in the vShield Edge gateway.
13 (Optional) Type a description for the IP pool.
14 Select whether to enable or disable the IP pool.
15 (Optional) In the Advanced panel, type the DNS name.
16 (Optional) Type the secondary DNS name.
17 Type the connection-specific DNS suffix for domain based host name resolution.
18 Type the WINS server address.
19 Click OK.
Add private network
Add the network that you want the remote user to be able to access.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click a vShield Edge instance.
6 Click the VPN tab.
7 Click the SSL VPN-Plus tab.
vShield Administration Guide
104 VMware, Inc.