5.1

Add SSL VPN-Plus Server Settings
You must add SSL VPN server settings to enable SSL on a vShield Edge interface.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click a vShield Edge instance.
6 Click the Edges tab.
7 Click the VPN tab.
8 Click the SSL VPN-Plus tab.
9 In the Configure panel, click Server Settings.
10 Click Change.
The Change Server Settings dialog box opens.
11 Select the vShield Edge interface on which you want to enable SSL VPN-Plus. Select ANY - 0.0.0.0 to enable
SSL VPN-Plus on all interfaces of the selected vShield Edge.
12 Edit the port number if required. This port number is required to configure the installation package.
13 Select the encryption method.
14 (Optional) From the Server Certificates table, select the server certificate that you want to add.
15 Click OK.
What to do next
Enable the SSL VPN service.
Enable the SSL VPN-Plus Service
After configuring the SSL VPN-Plus service, enable the service for remote users to begin accessing private
networks.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click a vShield Edge instance.
6 Click the VPN tab.
7 Click the SSL VPN-Plus tab.
8
Click the icon.
vShield Administration Guide
112 VMware, Inc.