5.1

3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click a vShield Edge instance.
6 Click the VPN tab.
7 Click the SSL VPN-Plus tab.
8 In the Configure panel, click Authentication.
9
Click the Add ( ) icon
The Add Server dialog box opens.
10 In Type, select RSA-ACE.
11 (Optional) Type the timeout period in seconds for the RSA server.
12 In Configuration File, browser to and select the sdconf.rec file that you downloaded from the RSA
Authentication Manager.
13 Select Enabled or Disabled to indicate whether the server is enabled.
14 In the Advanced section, type the IP address of the vShield Edge interface through which the RSA server
is accessible.
15 Select Use this server for secondary authentication if you want to use this server as the second level of
authentication.
Select Terminate Session if authentication fails if required.
16 Click OK.
Add Local Authentication Server
You can add a local authentication server to bound to the SSL gateway. All users in the bounded authenticated
server will be authenticated.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click a vShield Edge instance.
6 Click the VPN tab.
7 Click the SSL VPN-Plus tab.
8 In the Configure panel, click Authentication.
9
Click the Add (
) icon
The Add Server dialog box opens.
10 In Type, select LOCAL.
11 To define a password policy, select Password Policy and specify the required values.
vShield Administration Guide
118 VMware, Inc.