5.1

Enable the SSL VPN-Plus Service
After configuring the SSL VPN-Plus service, enable the service for remote users to begin accessing private
networks.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click a vShield Edge instance.
6 Click the VPN tab.
7 Click the SSL VPN-Plus tab.
8
Click the icon.
What to do next
The Dashboard displays the status of the service, number of active SSL VPN sessions, and session statistics
and data flow details.
Working with IP Pools
You can add, edit, or delete an IP pool.
Add an IP Pool
The remote user is assigned a virtual IP address from the IP pool that you add.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click a vShield Edge instance.
6 Click the VPN tab.
7 Click the SSL VPN-Plus tab.
8 In the Configure panel, click IP Pool.
9
Click the Add ( ) icon.
The Add IP Pool dialog box opens.
10 Type the begin and end IP address for the IP pool.
11 Type the netmask of the IP pool.
12 Type the IP address which is to add the routing interface in the vShield Edge gateway.
13 (Optional) Type a description for the IP pool.
14 Select whether to enable or disable the IP pool.
vShield Administration Guide
120 VMware, Inc.