5.1

Enable an IP Pool
You can enable an IP pool if you want an IP address from that pool to be assigned to the remote user.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Edge tab.
4 Double-click a vShield Edge gateway.
5 Click the VPN tab.
6 Click the SSL VPN-Plus tab.
7 In the Configure panel, click IP Pool.
8 Select the IP pool that you want to enable
9
Click the Enable (
) icon.
The selected IP pool is enabled.
Disable an IP Pool
You can disable an IP pool if you do not want the remote user to be assigned an IP address from that pool.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Edge tab.
4 Double-click a vShield Edge gateway.
5 Click the VPN tab.
6 Click the SSL VPN-Plus tab.
7 In the Configure panel, click IP Pool.
8 Select the IP pool that you want to disable
9
Click the Disable (
) icon.
The selected IP pool is disabled.
Change the Order of an IP Pool
SSL VPN assigns an IP address to a remote user based on the order of the IP pool.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Edge tab.
4 Double-click a vShield Edge gateway.
5 Click the VPN tab.
6 Click the SSL VPN-Plus tab.
vShield Administration Guide
122 VMware, Inc.