5.1

n
Add a corresponding firewall rule to allow the private network traffic.
Delete a Private Network
You can delete a private network
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges tab.
5 Double-click a vShield Edge gateway.
6 Click the VPN tab.
7 Click the SSL VPN-Plus tab.
8 In the Configure panel, click Private Networks.
9 Click the network that you want to delete.
10
Click the Delete ( ) icon
The selected network is deleted.
Enable a Private Network
When you enable a private network, the remote user can access it through SSL VPN-Plus.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges tab.
5 Double-click a vShield Edge gateway.
6 Click the VPN tab.
7 Click the SSL VPN-Plus tab.
8 In the Configure panel, click Private Networks.
9 Click the network that you want to enable.
10
Click the Enable icon ( ).
The selected network is enabled.
Disable a Private Network
When you disable a private network, the remote user cannot access it through SSL VPN-Plus.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Edge tab.
vShield Administration Guide
124 VMware, Inc.