5.1

SSL VPN-Plus Logs
SSL VPN-Plus gateway logs are sent to the syslog server configured on the vShield Edge appliance. SSL VPN-
Plus client logs are stored in the following directory on the remote user's computer: %PROGRAMFILES%/VMWARE/SSL
VPN Client/.
Edit General Settings
You can edit the default VPN settings.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click a vShield Edge instance.
6 Click the VPN tab.
7 Click the SSL VPN-Plus tab.
8 Click General Settings.
The Change General Settings dialog box opens.
9 Make required selections.
Select To
Prevent multiple logon using same
username
Allow a remote user to login only once with a username
Enable compression
Enable TCP based intelligent data compression and improve data transfer
speed.
Enable logging
Maintain a log of the traffic passing through the SSL VPN gateway.
Force virtual keyboard
Allow remote users to enter web or client login information only via the
virtual keyboard.
Randomize keys of virtual keyboard
Make the virtual keyboard keys random.
Enable forced timeout
Disconnect the remote user after the specified timeout period is over. Type
the timeout period in minutes.
Session idle timeout
If there is no activity on the user session for the specified period, end the user
session after that period is over.
User notification
Type a message to be displayed to the remote user after he logs in.
Enable public URL access
Allow remote user to access any site which is not configured (and not listed
on web portal) by administrator.
10 Click OK.
Edit Web Portal Design
You can edit the client banner bound to the SSL VPN client.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
vShield Administration Guide
134 VMware, Inc.