5.1

11 Click Enable Logging to log DNS traffic.
Generated logs are sent to the syslog server.
12 Select the log level.
13 Click Ok.
Configure Remote Syslog Servers
You can configure one or two remote syslog servers. vShield Edge events and logs related to firewall events
that flow from vShield Edge appliances are sent to the syslog servers.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click the vShield Edge instance for which you want to specify the syslog servers.
6 Click the Status tab.
7 In the Details panel, click Change next to Syslog servers.
8 Type the IP address of both remote syslog servers.
9 Click Add to save the configuration.
Change CLI Credentials
You can edit the credentials to be used for logging in to the Command Line Interface (CLI).
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Select a vShield Edge instance.
6
Click the More Actions ( ) icon and select Change CLI Credentials.
7 Make the appropriate edits.
8 Click OK.
Upgrade vShield Edge to Large or X-Large
If you installed a compact vShield Edge instance, you can upgrade it to a large or x-large vShield Edge instance.
Prerequisites
n
A compact vShield Edge instance requires 256 MB memory and 200 MB disk space.
n
A large vShield Edge instance requires 1 GB memory and 256 MB disk space.
vShield Administration Guide
142 VMware, Inc.